www.gvk.com.au

1 ! ". # $ %& &. CONTENTS. CABLE IDENTIFICATION 1. 1 CABLE MARKERS. Z-Type 4, 7, 12. K-Type 5, 7, 12. O-Type 5, 8, 12. E-Type 5, 8, 13. G-Type 5, 9, 13. Applicators 6, 9. V-Type 6, 10, Permark 316 6, 11. 2 LABELLING SYSTEMS. Stainless Steel BetaMarkers 14, 15. Carrier Strips for K-Type 14, 15. TKM Self-laminating Labels 14, 15. About Whatever your cable marking requirements, we can provide you with a suitable product. If you need to identify cables, we are sure that we can help and give you piece of mind that the cable will be clearly marked whenever you want to read it. TAKE A LOOK AT SOME OF OUR LATEST INNOVATIONS: A cable marker only 3mm long to save space where LONG. legends are needed. Stainless Steel Labels Pre-Marked to customer requirments. A cable marker which grips 90% of the cable circumference to provide a really snap on cable marker for Pre-termination and post termination application.

2 Wrap around marker onto which you can write. CABLE MARKERS. 1. Z-TYPE MARKERS. Expanding gusset The Z-Type marker has may be printed sequentially, an expanding gusset which numerically or alphabetically, Wide size range enables each size of marker and include any combination Various pack styles to accommodate a wide range of characters and character to suit your production of cable sizes. The size range height. Special symbols may requirements allows marking of cables from also be produced. All marks less than to 35mm2. can be packed in the order Straight or chevron cut As well as straight cut, chevron of use. For more information Colour coding option cut markers are available for telephone +44 (0) 1527 540 400. enables identification interlocking and alignment SERVICE TEMPERATURE. when mark is obscured of mark. Z-Type markers are RANGE: also available colour coded Pre-print service also 45 C to +70 C.

3 To BS6746C:1993. available, contact MATERIAL: Plasticised PVC. Tyco Electronics A customised service for Z-Type and K-Type (see MARKS AVAILBLE: A-Z, 0-9, overleaf) markers is also +, , /, phase, earth, blank available. Customised markers and full stop. 4. CABLE MARKERS. K-TYPE MARKERS 1. Elliptical profile for fitting The K-Type marker has an conduit or pipe before or to cables or carrier strips elliptical profile which allows after termination. Marks a wide cable diameter range can be changed easily. Large characters for from 4mm2 to 10mm2 to be easy reading SERVICE TEMPERATURE. accommodated. An alternative RANGE: 45 C to +70 C. Colour coding option method of fixing using carrier enables identification strips and retaining straps MATERIAL: Plasticised PVC. when mark is obscured in various forms allows the MARKS AVAILABLE: Pre-print service available, K-Type marker to be used A-Z, 0-9, +, ,/, phase, earth, contact Tyco Electronics for marking of outer cable, blank and full stop.

4 O-TYPE MARKERS. Conforms to BS3858: The O-Type marker is a thin circumference of the marker. 1992 Type 3 walled plasticised PVC marker Letters and symbols are which is particularly suited to Colour coding enables printed on a pink background. high density wiring applications identification when where space saving is paramount. SERVICE TEMPERATURE. mark is obscured Nine sizes of marker cover RANGE: 65 C to +95 C. Thin wall for densely cable sizes up to 16mm2. They MATERIAL: Plasticised PVC. packed wiring are colour coded to BS3858: MARKS AVAILABLE: A-Z, 0-9, 1992 which includes repeated +, ,/, phase, earth, blank printing of the individual digit and full stop. three times around the E-TYPE MARKERS. Snap-on marker for E-Type markers allow for the allows them to grip the wire and terminated cables marking of in-situ wiring or remain in place once applied.

5 Cables after termination. Markers The chevron cut ensures legends Built-in applicator for are easily and quickly applied remain aligned. ease of use using the built-in applicator. The SERVICE TEMPERATURE. 10 sizes cover cable range flared end of the applicator is RANGE: 40 C to +125 C. from to 100mm2 placed on the wire to be marked and markers are pushed down MATERIAL: High quality copolymer. European colour coding option enables identification the applicator on to the wire. MARKS AVAILABLE: A-Z, 0-9, when mark is obscured The material used to produce +, ,/, phase, earth, blank and the markers is very elastic which full stop. G-TYPE MARKERS. Zero halogen, UL94 Vo The G-Type marker, made chevron cut ensures legends gusseted marker from a zero halogen, cadmium remain aligned. The markers free and silicone free, UL94 Vo are available in black on yellow.

6 Mark permanence to BS3858. material has been specifically Clause , DIN VDE 0611 SERVICE TEMPERATURE. developed for use in confined Part 1 and DIN VDE 0360 Part 1 RANGE: 45 C to +70 C. areas when human life or electronic Five sizes cover outside cable components could be at risk. MATERIAL: Modified thermo- diameters from to The products of combustion plastic compound (halogen, are free from halogens. The silicone and cadmium free). Expanding gusset for ease of application gussetted design means each MARKS AVAILABLE: size will cover a range of cable A-Z, 0-9, +, ,/, phase, earth, Interlocking for alignment diameter sizes and the blank and full stop. of marks 5. CABLE MARKERS. 1 APPLICATORS FOR 0-TYPE AND Z-TYPE MARKERS. 6 sizes A range of applicators suitable coated steel to provide for either Z or 0-Type easy marker application. PTFE coating for easy markers.

7 Made from PTFE. marker application V-TYPE MARKERS. Temperature rating from V-Type markers are individual Standard V-Type markers 45 C to +70 C (-50 F push-on characters used to are yellow or white with black to +158 F). identify wires and small legends and can be supplied cables permanently. They are as loose pieces packed in Resistant to sea water, designed with an expanding boxes, on reels or flat disc fuels and oils. profile, enabling each marker reels. Color coded markers 4 sizes covering wire to accommodate a wide range are also available. diameters from of wire/cable sizes. V-Type . SERVICE TEMPERATURE. to ( to markers are a simple, cost- RANGE: 45 C to +70 C. inches) effective solution for many ( 50 F to +158 F). commercial wire identification applications. MATERIAL: Plasticized polyvinyl chloride (PPVC). The markers are supplied chevron cut and this ensures MARKS AVAILABLE: the legends remain aligned.

8 A-Z, 0-9, +, ,/, phase, earth, blank and full stop. PERMARK MARKERS. Pre-marked to customer Tyco Permark 316 stainless SERVICE TEMPERATURE. PER requirements. steel markers are recommended RANGE: 80 C to +500 C. MAR. K Customer-defined kits for for marking in hostile (112 F to +932 F). environments. Using state- ease of installation. MATERIAL: of-the-art technology and Excellent character legibility. no inks, the marking process Stainless Steel One-piece, 316 stainless produces a permanent, deep PRINTER INFORMATION: steel construction. surface mark with a darkened Pre-printed per customer character in high contrast Variety of fixing methods. requirements. to the background. Permark . Mark will endure the lifetime markers are produced to Permark Speciality Products of a Permark S/S marker. individual customer requirements Excellent resistance to on a fast turn-around basis weather extremes and with the flexible and easy-to- high levels of UV light.

9 Use Permark software that allows electronic or manual Resistant to corrosive data entry. Completed markers marine and industrial are supplied in customer atmospheres. defined kits for ease of Excellent resistance to a installation. We recommend variety of hydrocarbons, installation with 316. organic chemicals, acids, stainless steel cable ties. alkalis and inorganic salts. For resistance to a specific chemical, contact your local Tyco representative. 6. CABLE MARKERS. Z-TYPE MARKERS STRAIGHT CUT AND CHEVRON CUT. For Cable Marker Packed 1. For Cable size Marker length Reel (R) Pancake Order code Order code dia mm mm2 (BS6004) (BS6231) size mm Box (A) Reel (PR) (Straight cut) (Chevron cut). 5 1000 0580 1151. 7 1000 0581 1152. 9 1000 250 0615 1153. 11 1000 250 0616 1154. 13 1000 200 0617 1155. 15 1000 150 0618 1156. 18 500 150 0620 1157. 23 500 75 0622 1158.

10 35 250 50 0624 1159. *Application to cables BICC Ref. No. 6491X. COLOUR OPTIONS (STRAIGHT CUT) COLOUR OPTIONS (CHEVRON CUT) MATERIAL PPVC. White body marked black: A-Z, 0-9 White body marked black: A-Z, SERVICE TEMPERATURE RANGE. and symbols, available on reels 0-9 and symbols, available in 45 C to +70 C. (R) in boxes (A) and on pancake boxes (A) only. CHEMICAL RESISTANCE. reels (PR). Yellow body marked black: A-Z, Excellent: Aircraft Fuel, Propan- Yellow body marked black: A-Z, 0-9 0-9 and symbols, available on 2-ol, 1,1,1 Trichloroethane, Kilfrost and symbols, available on reels (R) only. reels (R) only. Silicone Hydraulic Fluid Poor: Colour coded: 0-9 all sizes, available Colour coded: 0-9, size 11 only, Aeroshell (4), Sullage Fluid, in boxes (A). 0-9 box pack (100 available in boxes (A) or on reels (R). Gas Turbine Oil 98. Poor: off each number) also available.