Example: barber

XPS 8900 Service Manual - Dell

xps 8900 Service ManualComputer Model: xps 8900 Regulatory Model: D14 MRegulatory Type: D14M002 Notes, cautions, and warningsNOTE: A NOTE indicates important information that helps you make better use of your : A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the : A WARNING indicates a potential for property damage, personal injury, or 2016 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective - 08 Rev. A01 ContentsBefore working inside your you begin ..11 Safety working inside your view of your the computer cover .. the computer cover .. the memory the memory the chassis the chassis the front bezel .. the front the graphics-card bracket (optional).

loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. ... 3 front bezel 4 primary hard-drive 5 secondary hard-drive 6 graphics card 7 card-retention bracket 15. System-board components 1 chassis-fan connector (FAN_SYS2) 2 power connector (ATX_CPU)

Tags:

  Primary, Loss, Secondary, 0809, Xps 8900

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of XPS 8900 Service Manual - Dell

1 xps 8900 Service ManualComputer Model: xps 8900 Regulatory Model: D14 MRegulatory Type: D14M002 Notes, cautions, and warningsNOTE: A NOTE indicates important information that helps you make better use of your : A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the : A WARNING indicates a potential for property damage, personal injury, or 2016 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective - 08 Rev. A01 ContentsBefore working inside your you begin ..11 Safety working inside your view of your the computer cover .. the computer cover .. the memory the memory the chassis the chassis the front bezel .. the front the graphics-card bracket (optional).

2 The graphics-card bracket (optional).. the graphics card (optional).. the graphics card (optional).. the wireless the wireless the solid-state the solid-state the solid-state drive the solid-state drive the primary the primary hard-drive .. the hard-drive the hard-drive the secondary hard-drive (optional).. the secondary hard-drive (optional).. the tertiary hard-drive (optional).. the tertiary the optical .. the optical the top the top the the the media-card the media-card the top the top the front the front the power-button the power-button the processor fan and heat-sink the processor fan and heat-sink the the the coin-cell the coin-cell the power-supply the power-supply the system the system the Service Tag in the BIOS setup setup BIOS setup forgotten CMOS the help and contacting working inside your computerNOTE: The images in this document may differ from your computer depending on the configuration you ordered.

3 Before you begin 1 Save and close all open files and exit all open Shut down your shut-down instruction varies depending on the operating system installed on your computer. Windows 10: Click Start Power Shut down. Windows : On the Start screen, click the power icon Shut down. Windows 7: Click Start Shut : If you are using a different operating system, see the documentation of your operating system for shut-down Disconnect your computer and all attached devices from their electrical Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your Remove any media card and optical disc from your computer, if After the computer is unplugged, press and hold the power button for 5 seconds to ground the system instructionsUse the following safety guidelines to protect your computer from potential damage and ensure your personal : Before working inside your computer, read the safety information that shipped with your computer.

4 For more safety best practices, see the Regulatory Compliance home page at : Disconnect all power sources before opening the computer cover or panels. After you finish working inside the computer, replace all covers, panels, and screws before connecting to the electrical : To avoid damaging the computer, ensure that the work surface is flat and : To avoid damaging the components and cards, handle them by their edges, and avoid touching pins and : You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that shipped with the product or at : Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer.

5 While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal : When you disconnect a cable, pull on its connector or on its pull tab, not on the cable itself. Some cables have connectors with locking tabs or thumb-screws that you must disengage before disconnecting the cable. When disconnecting cables, keep them evenly aligned to avoid bending any connector pins. When connecting cables, ensure that the ports and connectors are correctly oriented and : Press and eject any installed card from the media-card toolsThe procedures in this document may require the following tools: Philips screwdriver12 Flat-head screwdriver Plastic scribe13 After working inside your computerCAUTION: Leaving stray or loose screws inside your computer may severely damage your Replace all screws and ensure that no stray screws remain inside your Connect any external devices, peripherals, or cables you removed before working on your Replace any media cards, discs, or any other parts that you removed before working on your Connect your computer and all attached devices to their electrical Turn on your computer.

6 14 Technical overviewWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at Inside view of your computer1power supply2optical drive3front bezel4primary hard-drive5secondary hard-drive6graphics card7card-retention bracket15 System-board components1chassis-fan connector (FAN_SYS2)2power connector (ATX_CPU)3processor cover4processor-fan connector (FAN_CPU)5memory-module slot (DIMM3)6memory-module slot (DIMM1)7memory-module slot (DIMM4)8memory-module slot (DIMM2)9power-button connector (F_PANEL1)10 SATA 6 Gbps drive connector (SATA 1)11main-power connector (ATX_SYS_2)12 SATA 6 Gbps drive connector (SATA 2)1613 Front2-USB connector (F_USB4)14 Front-USB connector (F_USB3)15 Front-USB connector (F_USB2)16solid-state drive slot17 SATA 6 Gbps drive connector (SATA 0)18 SATA 6 Gbps drive connector (SATA 4)19 SATA 6 Gbps drive connector (SATA 3)

7 20password-reset jumper (PSWD)21front-panel audio connector (F_AUDIOINT_SPKR)22 CMOS-reset jumper (CMCLR)23 PCI-Express x16 card slot (SLOT4)24 PCI-Express x1 card slot (SLOT3)25 PCI-Express x16 card slot (SLOT1)26wireless-card slot ( )27battery socket (BATTERY)28processor socket17 Removing the computer cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at Procedure1 Lay the computer on its side with the computer cover facing Remove the thumbscrew that secures the computer cover to the chassis, using a screw driver if Release the computer cover by sliding it away from the front of the Lift the cover away from the computer and set it cover18 Replacing the computer cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer.

8 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at Procedure1 Ensure that no tools or extra parts are left inside the Align the tabs at the bottom of the computer cover with the slots located along the edge of the Press the computer cover down and slide it towards the front of the Replace the thumbscrew that secures the computer cover to the Place the computer in an upright the instructions in After working inside your computer .19 Removing the memory modulesWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer.

9 For more safety best practices, see the Regulatory Compliance home page at PrerequisitesRemove the computer Locate the memory-module slot on the system more information, see System-board components .2 Press out the securing clip at each end of the memory-module : If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the Remove the memory module out of the memory-module clips (2)2memory-module slot3memory module21 Replacing the memory modulesWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at Procedure1 Align the notch on the memory module with the tab on the memory-module Insert the memory module into the memory-module slot, and press the memory module down until it snaps into position and the securing clips lock in : If you do not hear the click, remove the memory module and reinstall clips (2)2memory module3memory-module slot4notchPost-requisitesReplace the computer the chassis fanWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer.

10 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at PrerequisitesRemove the computer Disconnect the chassis-fan cable from the system more information, see System-board components .2 Remove the screws that secure the chassis fan to the Slide and lift the chassis fan off the (4)2chassis fan3chassis-fan cable25 Replacing the chassis fanWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at Procedure1 Align the screw holes on the chassis fan with the screw holes on the Replace the screws that secure the chassis fan to the Connect the chassis-fan cable to the system the computer the front bezel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer.


Related search queries