“Y”-PATTERN GLOBE VALVES - BFE

1 STANDARD CONFIGURATIONSBASICCRYOGENICBELLOW SEALGLOBE Y -PATTERN VALVE DESCRIPTIONG lobe VALVES are used for flow regulation, frequent operation, in-creased flow resistance or for positive shutoff when closed. GLOBE VALVES are closing-down VALVES in which the closure member is moved squarely on and off the seat. By this mode of disc travel, the seat open-ing varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties in-volving regulation of flow rate. GLOBE VALVES can also be used for on-off duty, the seating load can be positively controlled with high sealing capacity. The change in direction of fluid flow through these VALVES produces increased resistance and pressure drop. The oblique pattern GLOBE -valve body is designed to reduce the flow resistance of the valve to a min-imum. This valve combines low flow resistance for on-off duty with the robustness of GLOBE -valve seatings.

2 GLOBE VALVES are used in many industrial applications including the oil and gas industry, pharmaceutical, manufacturing, automotive, and marine. GLOBE VALVES are also recom-mended for services requiring frequent operation and positive quality packing for reliable tightness and low emission design. Low operation torque and rotating stem for the most API 602 design simplicity. High ow capacity port sizes and disc retraction to minimize ow velocities and maximize valve service construction of body-bonnet connections is welded bonnet type. Bolted bonnet is avaliable as alternative SYMBOLThe connection wire secures the disc to the stem, the disc can swivel in order to guarantee the complete contact between the disc and seats seat design is integral type, screwed-in type is is avaliable as alternative construction or in case of bolted bonnet design. Extra thickness of the seat ring provides suf cient material to renew the seating surface over and over die forged structure for all pressure containing aligning two piece packing designed to reduce the ow resistance of the valve to a disc for perfect seat and disc alignment.

3 Disc is machined to the tightest tolerances to ensure trouble free shutoff and Screw and Yoke (OS&Y).Flanged VALVES are provided with anges integral with the body forgings. SECTION INDEX OF Y -PATTERN GLOBE VALVESAPPLICABLE STANDARDSDESIGNAPI 602 - ISO 15761 - ASME INSPECTION & TESTINGAPI 598 MARKINGMSS SP-25 RATINGASME EMISSIONAPI 624 - ISO 15848 PAGEDESCRIPTIONSYMD-3 BASIC CONFIGURATIONTHREADED AND SOCKET WELD ENDSD-4 BASIC CONFIGURATIONASME INTEGRAL FLANGED ENDSD-5 CRYOGENIC CONFIGURATION THREADED AND SOCKET WELD ENDSD-6 CRYOGENIC CONFIGURATION ASME INTEGRAL FLANGED ENDSD-7 BELLOW SEAL CONFIGURATIONTHREADED AND SOCKET WELD ENDSD-8 BELLOW SEAL CONFIGURATIONASME INTEGRAL FLANGED ENDSBOLTED BONNET GLOBE VALVESBOLTED BONNET GLOBE VALVESBOLTED BONNET GLOBE VALVESBOLTED BONNET GLOBE VALVES BOLTED BONNET GLOBE VALVES BOLTED BONNET GLOBE VALVES PAGEDESCRIPTIONSYMD-9 BASIC CONFIGURATIONTHREADED AND SOCKET WELD ENDSD -10 BASIC CONFIGURATIONASME INTEGRAL FLANGED ENDSD - 11 CRYOGENIC CONFIGURATIONTHREADED AND SOCKET WELD ENDSD -12 CRYOGENIC CONFIGURATIONASME INTEGRAL FLANGED ENDSD -13 BELLOW SEAL CONFIGURATIONTHREADED AND SOCKET WELD

4 ENDSD -14 BELLOW SEAL CONFIGURATIONASME INTEGRAL FLANGED ENDSD -15 AVAILABLE OPTIONS FOR Y PATTERN GLOBE VALVESWELDED BONNET GLOBE VALVESWELDED BONNET GLOBE VALVESWELDED BONNET GLOBE VALVESWELDED BONNET GLOBE VALVESWELDED BONNET GLOBE VALVES WELDED BONNET GLOBE VALVES Y -PATTERN GLOBE VALVESSTANDARD CONFIGURATIONSBASICCRYOGENICBELLOW SEALGLOBE Y -PATTERN VALVE DESCRIPTIONG lobe VALVES are used for flow regulation, frequent operation, in-creased flow resistance or for positive shutoff when closed. GLOBE VALVES are closing-down VALVES in which the closure member is moved squarely on and off the seat. By this mode of disc travel, the seat open-ing varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties in-volving regulation of flow rate. GLOBE VALVES can also be used for on-off duty, the seating load can be positively controlled with high sealing capacity.

5 The change in direction of fluid flow through these VALVES produces increased resistance and pressure drop. The oblique pattern GLOBE -valve body is designed to reduce the flow resistance of the valve to a min-imum. This valve combines low flow resistance for on-off duty with the robustness of GLOBE -valve seatings. GLOBE VALVES are used in many industrial applications including the oil and gas industry, pharmaceutical, manufacturing, automotive, and marine. GLOBE VALVES are also recom-mended for services requiring frequent operation and positive quality packing for reliable tightness and low emission design. Low operation torque and rotating stem for the most API 602 design simplicity. High ow capacity port sizes and disc retraction to minimize ow velocities and maximize valve service construction of body-bonnet connections is welded bonnet type. Bolted bonnet is avaliable as alternative SYMBOLThe connection wire secures the disc to the stem, the disc can swivel in order to guarantee the complete contact between the disc and seats seat design is integral type, screwed-in type is is avaliable as alternative construction or in case of bolted bonnet design.

6 Extra thickness of the seat ring provides suf cient material to renew the seating surface over and over die forged structure for all pressure containing aligning two piece packing designed to reduce the ow resistance of the valve to a disc for perfect seat and disc alignment. Disc is machined to the tightest tolerances to ensure trouble free shutoff and Screw and Yoke (OS&Y).Flanged VALVES are provided with anges integral with the body forgings. SECTION INDEX OF Y -PATTERN GLOBE VALVESAPPLICABLE STANDARDSDESIGNAPI 602 - ISO 15761 - ASME INSPECTION & TESTINGAPI 598 MARKINGMSS SP-25 RATINGASME EMISSIONAPI 624 - ISO 15848 PAGEDESCRIPTIONSYMD-3 BASIC CONFIGURATIONTHREADED AND SOCKET WELD ENDSD-4 BASIC CONFIGURATIONASME INTEGRAL FLANGED ENDSD-5 CRYOGENIC CONFIGURATION THREADED AND SOCKET WELD ENDSD-6 CRYOGENIC CONFIGURATION ASME INTEGRAL FLANGED ENDSD-7 BELLOW SEAL CONFIGURATIONTHREADED AND SOCKET WELD ENDSD-8 BELLOW SEAL CONFIGURATIONASME INTEGRAL FLANGED ENDSBOLTED BONNET GLOBE VALVESBOLTED BONNET GLOBE VALVESBOLTED BONNET GLOBE VALVESBOLTED BONNET GLOBE VALVES BOLTED BONNET GLOBE VALVES BOLTED BONNET GLOBE VALVES PAGEDESCRIPTIONSYMD-9 BASIC CONFIGURATIONTHREADED AND SOCKET WELD ENDSD -10 BASIC CONFIGURATIONASME INTEGRAL FLANGED ENDSD - 11 CRYOGENIC CONFIGURATIONTHREADED AND SOCKET WELD ENDSD -12 CRYOGENIC CONFIGURATIONASME INTEGRAL FLANGED ENDSD -13 BELLOW SEAL CONFIGURATIONTHREADED AND SOCKET WELD

7 ENDSD -14 BELLOW SEAL CONFIGURATIONASME INTEGRAL FLANGED ENDSD -15 AVAILABLE OPTIONS FOR Y PATTERN GLOBE VALVESWELDED BONNET GLOBE VALVESWELDED BONNET GLOBE VALVESWELDED BONNET GLOBE VALVESWELDED BONNET GLOBE VALVESWELDED BONNET GLOBE VALVES WELDED BONNET GLOBE VALVESD-2D-3 CAH (OPEN POSITION) BFLOW Y -PATTERN GLOBE VALVESBOLTED BONNET GLOBE VALVES BASIC CONFIGURATIONTHREADED AND SOCKET WELD ENDSWORKINGPRESSURE RATINGSIZESTANDARDDESIGN TYPEABCHWEIGHTFIGURENPSDN mminmminmminmminkglbASME8001/4 " 301 FULL BORE3/8" 3021/2 " 3033/4" 6YH 3041" 3051-1/4 " 3061-1/2 " 3072"50S11907. 5 308 ASME 15001/4 " 3013/8" 3021/2 " 3033/4" 3041" 3051-1/4 " 3061-1/2 " 3072" 7. 308 ASME 25001/4 " 3013/8" 3021/2 " 3033/4" 3041" 3051-1/4 " 3061-1/2 " 3072" 7. 308 PRODUCT FEATURES: Outside Screw and Yoke (OS&Y). Self aligning two piece packing gland. Integral backseat. CAH (OPEN POSITION) BFLOWDESIGN TYPE S2 RING JOINT BODY-BONNETCONNECTION DESIGN TYPE S1 SPIRAL WOUND GASKET BODY-BONNETCONNECTION OTHER END CONNECTION TYPES AVAILABLEINTEGRAL BUTT WELDING ENDBUTT WELDING ENDAWELDED NIPPLESTBSATBSBUTT WELDING ENDPLANEENDMALESCREWEDENDBFE reserves the right to change designs, dimensions or specifications without notice.

8 D-4 Y -PATTERN GLOBE VALVESBOLTED BONNET GLOBE VALVES BASIC CONFIGURATIONASME INTEGRAL FLANGED ENDSPRODUCT FEATURES: Outside Screw and Yoke (OS&Y). Self aligning two piece packing gland. Integral backseat. Integral body OTE 1: Face-to-Face ASME related to class TYPE S1 SPIRAL WOUND GASKET BODY-BONNET CONNECTION DESIGN TYPE S2 RING JOINTBODY-BONNET CONNECTION WORKINGPRESSURE RATINGSIZESTANDARDDESIGN TYPEA-RFA-RJBCHWEIGHTFIGURENPSDN mminmminmminmminmminkglbASME150(SEE NOTE 1)1/2 " (1) 303 FULL BORE3/4"20S1178(1)7. 3041"25S1203(1) 9216(1) 3051-1/2 "40S1229(1) (1) 3072"50S1267(1) (1) 308 ASME 3001/2 " 3033/4"20S11787. 5117. 3041" 3051-1/2 " 3072" 308 ASME 6001/2 " 3033/4"20S11917. 5 5 217. 3041" 3051-1/2 " 3072"50S129211. 5 308 ASME 15001/2 " 3033/4" 3041" 3051-1/2 " 3072" 308 ASME 25001/2 " 3033/4" 3041" 3051-1/2 " 3072"50S245117. 7645417. 8 308 CH (OPEN POSITION) BFLOWA-RFA-RJ CH (OPEN POSITION) BFLOWA-RFA-RJBFE reserves the right to change designs, dimensions or specifications without notice.

9 D-5 WORKINGPRESSURE RATINGSIZESTANDARDDESIGN TYPEABCHWEIGHTFIGURENPSDN mminmminmminmminkglbASME8001/4 " 301 FULL BORE3/8" 3021/2 " 3033/4" 3041" 3051-1/4 " 3061-1/2 " 3072"50S11907. 5 308 ASME 15001/4 " 3013/8" 3021/2 " 3033/4" 3041" 3051-1/4 " 3061-1/2 " 7. 3072" 308 ASME 25001/4 " 3013/8" 3021/2 " 3033/4" 3041" 7. 3051-1/4 " 3061-1/2 " 3072" 308 BOLTED BONNET GLOBE VALVESCRYOGENIC CONFIGURATION THREADED AND SOCKET WELD ENDSPRODUCT FEATURES: Outside Screw and Yoke (OS&Y). Self aligning two piece packing gland. Integral TYPE S1 SPIRAL WOUND GASKET BODY-BONNETCONNECTION DESIGN TYPE S2 RING JOINT BODY-BONNETCONNECTION Y -PATTERN GLOBE VALVES CAH (OPEN POSITION) BFLOW CAH (OPEN POSITION) BFLOWOTHER END CONNECTION TYPES AVAILABLEINTEGRAL BUTT WELDING ENDBUTT WELDING ENDAWELDED NIPPLESTBSATBSBUTT WELDING ENDPLANEENDMALESCREWEDENDBFE reserves the right to change designs, dimensions or specifications without notice. D-6 BOLTED BONNET GLOBE VALVES CRYOGENIC CONFIGURATIONASME INTEGRAL FLANGED ENDSPRODUCT FEATURES: Outside Screw and Yoke (OS&Y).

10 Self aligning two piece packing gland. Integral backseat. Integral body flanges. Bonnet OTE 1: Face-to-Face ASME related to class RATINGSIZESTANDARDDESIGN TYPEA-RFA-RJBCHWEIGHTFIGURENPSDN mminmminmminmminmminkglbASME150(SEE NOTE 1)1/2 " (1) YH 303 FULL BORE3/4"20S1178(1)7. YH-3041"25S1203(1) 9216(1) YH-3051-1/2 "40S1229(1) (1) YH-3072"50S1267(1) (1) YH-308 ASME 3001/2 " "20S11787. 5117. " 7. 83 CYH-3051-1/2 " " 6001/2 " "20S11917. 5 5 217. " " "50S129211. 5 7. 15001/2 " 7. 815 CYHF 3033/4" 3041" 3051-1/2 " 7. 3072" 308 ASME 25001/2 " 3033/4" 3041" 3051-1/2 " 3072"50S245117. 7645417. 8 308 Y -PATTERN GLOBE VALVESDESIGN TYPE S1 SPIRAL WOUND GASKET BODY-BONNET CONNECTION CH (OPEN POSITION) BFLOWA-RFA-RJDESIGN TYPE S2 RING JOINTBODY-BONNET CONNECTION CH (OPEN POSITION) BFLOWA-RFA-RJBFE reserves the right to change designs, dimensions or specifications without notice. D-7 Y -PATTERN GLOBE VALVESWORKINGPRESSURE RATINGSIZESTANDARDDESIGN TYPEABCHWEIGHTFIGURENPSDN mminmminmminmminkglbASME8001/4 " 301 FULL BORE3/8" 3021/2 " 3033/4" 3041" 3051-1/4 " 3061-1/2 " 3072"50P41907.