Devgrip - Protection Engineering

← Back to document page

Devgrip 238 is a two component, abrasion resistant epoxy DESCRIPTIONDevgrip 238 is designed to protect surfaces subject to unusual abrasive and wear conditions common to many heavy-duty industrial service operations and is ideal for use on pipe lines, drill pipe storage areas and any other surfaces subject to abrasive USESHaze Grey, Oxide Red, Black Semi-gloss 77% 2% 10 mils (250 microns) dry equivalent to 13 mils (325 microns) wet 124 gallon at 10 mils and stated volume m /liter at 250 microns and stated volume solids Allow appropriate loss factors Airless Spray PRACTICAL INFORMATION FOR Devgrip 238ColorGloss LevelVolume SolidsTypical ThicknessTheoretical CoveragePractical CoverageMethod of ApplicationDrying TimeTemperature Touch DryHard DryMinimumMaximum* not applicableOvercoating Interval withrecommended topcoats41 F (5 C) *26 hours18 hours30 days59 F (15 C) *13 hours9 hours30 days77 F (25 C) *6 hours3 hours30 daysPart A 91 F (33 C); Part B 81 F (27 C); Mixed 81 F (27 C) Ib/gal ( kg/l)REGULATORY DATAFlash PointProduct WeightVOCSee Product Characteristics lb/gal (206 g/lt) EPA Method 24D

Devgrip ® 238 Epoxy Surfaces must be dry, clean, free of oil, grease, form release agents, curing compounds, laitance, other foreign matter and be structurally sound.

  Devgrip