Devgrip - Protection Engineering

Devgrip 238 is a two component, abrasion resistant epoxy DESCRIPTIOND evgrip 238 is designed to protect surfaces subject to unusual abrasive and wear conditions common to many heavy-duty industrial service operations and is ideal for use on pipe lines, drill pipe storage areas and any other surfaces subject to abrasive USESHaze Grey, Oxide Red, Black Semi-gloss 77% 2% 10 mils (250 microns) dry equivalent to 13 mils (325 microns) wet 124 gallon at 10 mils and stated volume m /liter at 250 microns and stated volume solids Allow appropriate loss factors Airless Spray PRACTICAL INFORMATION FOR Devgrip 238 ColorGloss LevelVolume SolidsTypical ThicknessTheoretical CoveragePractical CoverageMethod of ApplicationDrying TimeTemperature Touch DryHard DryMinimumMaximum* not applicableOvercoating Interval withrecommended topcoats41 F (5 C) *26 hours18 hours30 days59 F (15 C) *13 hours9 hours30 days77 F (25 C) *6 hours3 hours30 daysPart A 91 F (33 C); Part B 81 F (27 C); Mixed 81 F (27 C) Ib/gal ( kg/l)REGULATORY DATAF lash PointProduct WeightVOCSee Product Characteristics lb/gal (206 g/lt) EPA Method 2

Devgrip ® 238 Epoxy Surfaces must be dry, clean, free of oil, grease, form release agents, curing compounds, laitance, other foreign matter and be structurally sound.

Tags:

  Devgrip

Information