metraonline.com

← Back to document page

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World s Best Kits. COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/25/18 INST99-3018INSTALLATION INSTRUCTIONS99-3018KIT FEATURES ISO DIN radio provision with pocket ISO DDIN radio provision 99-3018HG - gloss black, 99-3018S - silverKIT COMPONENTS A) Radio trim panel B) Radio brackets C) Pocket D) Upper dash trim panel (for navigation models) E) (2) Plastic washers F) (2) Metal clips G) (4) #8 x 3/8 Phillips truss-head screws H) (8) #8 x 3/8 Phillips pan-head screws I) (2) Copper threaded inserts J) Axxess interface and wiring harness (not shown)TOOLS REQUIRED Panel removal tool 9/32 socket wrench T-10 Torx driver Cutting tool Phillips screwdriverTABLE OF CONTENTSDash Disassembly.

2345678978910 6 10 3 3. Remove the dash trim on both sides of the radio panel. (Figures D, E) 4. Unclip the top dash radio trim (non-navigation models only).

  Metraonline