Technical Data Sheet - Jotun

Technical Data Sheet Hardtop Flexi The provided data is typical for factory produced products, subject to slight variation depending on colour. Gloss description: According to …

  Data, Technical, Technical data

Technical Data Sheet Application Guide

Epoxy HR Product description This is a two component polyamine cured phenolic/novolac epoxy coating. It is heat resistant up to 205 °C (401 °F) and can be applied on hot substrates up to 150 °C (302 °F).

Technical Data Sheet

Technical Data Sheet Epoxy HR Surface preparation summary table Substrate Minimum Recommended Carbon steel St 2 (ISO 8501-1) Sa 2½ (ISO 8501-1) Stainless steel The surface shall be hand or machine

  Epoxy

Technical Data Sheet Application Guide

Application Guide 3140;3240;4320 1,2 3140 Scope The Application Guide offers product details and recommended practices for the use of the product. The Application Guide (AG) must be read in conjunction with the relevant specification, Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for all the products used as part of the coating system.

  Guide, Applications, Application guide

Technical Data Sheet - Jotun

Optimum performance, including adhesion, corrosion protection, heat resistance and chemical resistance is achieved with recommended surface preparation. Date of issue:22 March 2021 Page: 3/7 This Technical Data Sheet supersedes those previously issued.

  Sheet, Resistance

Technical Data Sheet - Jotun

Packaging (typical) The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary due to local regulations. Size of containers (litres) Aluminium Paint H.R. 5 5 Storage Volume (litres) Depending on the actual exposure of the coating system, various primers and topcoats can be used in

  Packaging, Aluminium

Technical Data Sheet Jotamastic 87 Aluminium

Packaging (typical) The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary due to local regulations. Size of containers Jotamastic 87 Wintergrade Comp B 4 5 (litres) Jotamastic 87 Standard Comp B 2.7 Jotamastic 87 Aluminium Comp A 14.7 20 3 Volume (litres) Date of issue:27 June 2017 Page ...

  Packaging, Aluminium

Technical Data Sheet

This is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where short dry to handle and over coating times are required. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.

  Phosphate, Zinc, Zinc phosphate

SAFETY DATA SHEET - Jotun

1.3 Details of the supplier of the safety data sheet Product type :Liquid. Product description :Paint. 1.2 Relevant identified uses of the substance or mixture and uses advised against SECTION 1: Identification of the substance/mixture and of the company/ undertaking Product code :3140 1.4 Emergency telephone number SAFETY DATA SHEET

  Sheet, Data, Safety, Safety data sheet

SAFETY DATA SHEET - Jotun

See Annex to the Safety data sheet for additional information in the Exposure Scenario(s). Consumer applications, Industrial applications, Professional applications, Used by spraying. See Section 11 for more detailed information on health effects and symptoms.

  Sheet, Data, Safety, Safety data sheet

Technical Data Sheet

LEED®v4 (2013) EQ credit: Low emitting materials - Healthcare and schools, Exterior applied products: VOC content for Industrial Maintenance Coatings (250 g/l) (CARB(SCM)2007). MR credit: Building product disclosure and optimization - Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -

  Leeds, 174 v4

LEED v4.1 OPERATIONS AND MAINTENANCE - GreenCE

LEED v4.1 represents a series of upgrades that will improve our standards, encourage leadership, and make our platform more user friendly, more accessible—and most importantly—more collaborative than ever before. This is not a full version change, but rather an incremental update to the LEED rating systems. LEED v4.1 will be our

  Leeds, Leed v4

DREAM 70% PVDF IN COLOR - Sherwin-Williams

standards such as LEED v4 and Living Building Challenge (LBC). Contact us for more information or request a custom color today. (866) 351-6900. *In combination with a substrate. 060420_acc Accessibility Statement

  Leeds, Leed v4

ADVANCE - Benjamin Moore & Co.

Oct 12, 2018 · Qualifies for LEED® v4 Credit Qualifies for CHPS low emitting credit (Collaborative for High Performance Schools) CDPH v1 Emission Certified Class A (0-25) over non-combustible surfaces when tested in accordance with ASTM E-84 Water Vapor Transmission: ASTM D1653 (method A): 2.55 perms

  Leeds, 174 v4

Fire Protection Products

with limits per LEED v4 for total VOCs Mold and Mildew Resistance (ASTM G 21) Less than 10% Growth Tack-Free Time 10 minutes Dry-To-Touch 30-60 minutes Dry Rate 1/8 in. (3 mm) per 24 hours Application Temperature 40°F to 122°F (4°C to 50°C) Service Temperature -20°F to 180°F (-28°C to 82°C)

  Leeds, Leed v4

ProMar 200 Zero VOC Interior Latex Eg-Shel B20-2600 Series ...

OTC Yes LEED® 09 NC,CI,CS Yes OTC Phase II Yes LEED® 09 H&S Yes SCAQMD Yes LEED® v4 Emissons Yes CARB Yes LEED® v4 VOC Yes CARB SCM 2007 Yes MPI Yes SURFACE PREPARATION WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead.

  Leeds, 174 v4

USG SHEETROCK BRAND ECOSMART PANELS FIRECODE X

• USGBC® LEED® v4—may assist in achieving additional credits • Underwriters Laboratories Inc. (UL) Classification as to fire resistance, surface-burning characteristics and noncombustibility • Comply with ASTM C1396, Standard Specification for Gypsum Board, for 5/8 in. (15.9 mm) and Type X gypsum wallboard

  Panels, Brand, Leeds, Ecosmart, Sheetrock, 174 v4, Usg sheetrock brand ecosmart panels