POINT I/O Output Module - Rockwell Automation

← Back to document page

Installation InstructionsOriginal InstructionsPOINT I/O Output ModuleCatalog Numbers 1734-OB2, 1734-OB4, 1734-OB4K, 1734-OB8, 1734-OB8K, Series CCatalog numbers with the suffix K are conformal coated and their specifications are the same as non-conformal coated PageImportant User Information2Environment and Enclosure3North American Hazardous Location Approval4European Hazardous Location Approval5Before You Begin8Install the Mounting Base9Install the Module9Install the Removable Terminal Block10Remove a Mounting Base12Communicate with the Module12Wire the Modules14Interpret Status Indicators18Specifications202Rockwell Automation Publication 1734-IN018D-EN-E - January

(7.8 in.) and use end-anchors appropriately. Be sure to ground the DIN rail properly. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1, for more information. • Do not remove or replace an Adapter Module while power is applied. Interruption of the backplane can result in unintentional operation or machine ...

  Automation, Module, Rockwell automation, Rockwell, Results