Iec 61000 4 2
Found 8 free book(s)Data Sheet ADIN1100 - Analog Devices
www.analog.comJul 27, 2021 · IEC 61000-4-4 EFT (±4 kV) IEC 61000-4-2 ESD (±4 kV contact discharge) IEC 61000-4-2 ESD (±8 kV air discharge) IEC 61000-4-5 surge (±4 kV) IEC 61000-4-6 conducted immunity (10 V/m) IEC 61000-4-3 radiated immunity (Class A) EN 55032 radiated emissions (Class B) Small package: 40-lead, 6 mm × 6 mm LFCSP Temperature range
27 V ESD Protection Diode
www.onsemi.comThe IEC 61000−4−5 test is used to define the power absorption capacity of a surge protection device and long duration voltage transients such as lightning. Table 2 provides a summary of the ISO 7637 and IEC 61000−4−X test specifications. Table 3 provides the NUP2105L’s ESD test results. Table 2. ISO 7637 and IEC 61000−4−X Test ...
Overview of SEMI F47-0706
dom.semi.org"Class X" levels in Table 1 of IEC 61000-4-11 and IEC 61000-4-34. • NOTE 4: For the purposes of SEMI F47, creating phase-to-phase sags by simultaneously reducing the phase-to-neutral voltage an equal amount on two phases is permitted (i.e. the test vectors of …
IEC/EN61000 Standards for Power Supplies
slpower.comThe IEC/EN 61000-4-2 standard defines four standard levels of ESD protection, using two different testing methodologies. Contact discharge involves discharging an ESD pulse directly from the ESD test gun that is touching the device unde r test. This is the preferred method of testing. However, the standard provides for an alternate test ...
IEC 61000-4-2/ED2.0 - Welcome to the IEC Webstore
webstore.iec.chIEC 61000-4-2 Edition 2.0 2008-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test Compatibilité électromagnétique (CEM) – Partie 4-2: Techniques d'essai et de mesure – Essai d'immunité aux décharges électrostatiques
INTERNATIONAL STANDARD 61000-4-4 - DFV Technologie
dfv-technologie.comFor the purpose of this section of IEC 1000-4, the following definitions and terms apply and are applicable to the restricted field of electrical fast transient/burst; not all of them are included in IEC (50)161 [IEV]. 4.1 EUT: Equipment under test. 4.2 port: Particular interface of the EUT with the external electromagnetic environment.
250 W C L Dimmer - Lutron Electronics, Inc.
www.lutron.comIEC 61000-4-2. • Precise color matching • Mechanical air-gap switch to disconnect load power Warranty ... 4.69 in (119 mm) 2.94 in (75 mm) 2.75 in (70 mm) 0.30 in (7.6 mm) 1.31 in (33 mm) Note:equires a U.S. wallbox 2 R ` in (64 mm) deep minimum. Colors and Finishes Gloss Finishes
TXS0108E 8-Bit Bi-directional, Level-Shifting, Voltage ...
www.ti.com• IEC 61000-4-2 ESD (B port) – ±8 kV contact discharge – ±6 kV Air-gap discharge 2 Applications • Handsets • Smartphones • Tablets • Desktop PCs 3 Description This device is an 8-bit non-inverting level translator that uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage.