Search results with tag "Iso 8573"
Standard cylinders DNC-C180, to ISO 15552 - Festo
www.festo.com-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1 Operating and environmental conditions Operating medium Compressed air in accordance with ISO 85731:2010 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar] 0.6 … 12
Introduction to ISO Air Quality Standards
www.parkerstore.jpISO 8573-1:2010 Class 1.2.1 ISO 8573-1:2010 refers to the standard document and its revision, the three digits refer to the purity classifications selected for solid particulate, water and total oil. Selecting a air purity class of 1.2.1 would specify the following air quality when operating at the standard’s reference conditions:
A GUIDE TO THE ISO 8573 SERIES COMPRESSED AIR …
www.torqind.comiso 8573 is the group of international standards relating to the quality of compressed air and consists of nine separate parts. part 1 specifies the quality requirements of the compressed air and parts 2 – 9 specify the methods of testing for a range of contaminants.
Air Quality Classifications ISO 8573.1 2001
www.industrialaircompressors.bizAir Quality Classifications ISO 8573.1 2001 Air Quality Recommended Standards Typical Quality Classes Applications Classes Solids / Dirt Water Oil
Desiccant air dryers - Atlas Copco
www.atlascopco.com• An after-filter is not required to reach ISO 8573-1:2010 Class 2 for particles. To reach Class 1, a PDp⁺ filter is recommended. 10 Advanced options Pressure dew point sensor for DC1 controller. • Wall mounting kit. 1 Cerades™ The CD 20⁺-335⁺ is the …
Pressure sensors SDE1, with display - Festo
www.festo.comOperating medium Compressed air in accordance with ISO 85731:2010 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required)