Transcription of AMOUNT OF RESIN OR GELCOA T HARDENER …
{{id}} {{{paragraph}}}
Example: bachelor of science
AMOUNT OF RESIN OR GELCOA T HARDENER …
DIRECTIONS FOR POLYESTER HARDENERPOLYESTER RESIN /GELCOAT IS CATALYZED WITH MEKP (METHYL ETHYL KETONE PEROXIDE). THE RATIO IS APPROXIMATELY ONEOUNCE OF HARDENER PER GALLON OF RESIN . USE THE FOLLOWING RATIOS FOR SMALLER OF RESIN OR GELCOATHARDENER AMOUNT1 OUNCE10 DROPS1 PINT (16OZ)1/8 OUNCE1 QUART (32OZ)1/4 OUNCE1/2 GALLON (64OZ)1/2 OUNCE1 GALLON1 OUNCETHESE amounts ARE EASILY MEASURED IN THE OUNCE CUP WHICH IS SUPPLIED WITH THE RESIN . THE ABOVE RATIOS SHOULD GIVE YOU APOT LIFE OF ABOUT 15 TO 20 MINUTES AT 80 DEGREES F. IF YOU ARE SATURATING FIBERGLASS REINFORCEMENT IT SHOULD BE READY TORECOAT IN ABOUT 1-1/2 HOURS. TIME WILL VARY FROM WINTER TO SUMMER SINCE HIGHER TEMPERATURES PRODUCE FASTER CURING.
directions for pol yester hardener polyester resin/gelcoat is catalyzed with mekp (methyl ethyl ketone peroxide). the ratio is approximately one
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: