PDF4PRO ⚡AMP

Modern search engine that looking for books and documents around the web

Example: stock market

Carbothane 134 - Carboline

Carbothane 134 PRODUCT DATA SHEET November 2019134 Page 1 of 4 SELECTION & SPECIFICATION DATA Generic TypeAliphatic acrylic polyurethane. DescriptionCarbothane 134 is a glossy, tile-like, attractive topcoat, produces a smooth, slick and hard filmwhich is readily cleaned. Carbothane 134 has very good resistance to splash and spillage of acids,alkalies and most solvents. It exhibits excellent resistance to splash and spillage of salts and water. Features Excellent gloss and colour retention Excellent weatherability Excellent abrasion resistance Excellent flexibility Finish coat for exteriors of tanks, equipment, piping, structural steel and concrete surfaces wherechemical resistance, toughness and weatherability are required Excellent coating for use in chemical processing, pulp and paper, petrochemical, offshore drillingand similar demanding industries Many applications in areas of heavy marine, institutional and waste treatment where a highlyresistant and attractive coating is required Can be used over urethane, epoxy and others as recommended Not recommended for immersion service ColorAvailable in a variety of colours.

NOTE: Substitute thinners, especially Lacquer Thinners, may contain alcohols which will inhibit the cure of Carbothane 134. Use of thinners other than those supplied or approved by StonCor Africa may adversely affect product performance and void product warranty, whether express or implied. Ratio 8:1 Pot Life

Fullscreen Download
Loading..

Tags:

  Carbothane, Thinner, Carbothane 134

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Spam in document Broken preview Other abuse

Transcription of Carbothane 134 - Carboline

Documents from same domain

SELECTION & SPECIFICATION DATA - Carboline

msds.carboline.com

to these guidelines to achieve the desired results. Spray Application (General) The following spray equipment has been found suitable and is available from equipment manufacturers. Keep material under mild agitation during application. If spraying stops for more than 10 minutes, recirculate the material remaining in the spray line.

  Guidelines, Data, Specification, Material, Selection, Selection amp specification data

Carboguard 890 - Carboline

msds.carboline.com

January 2019 890 Page 2 of 4 SUBSTRATES & SURFACE PREPARATION General Surface must be clean and dry. Remove all dirt, dust, oil and all other contaminants. Steel Immersion: ISO 8501 Sa2½ Non-immersion: ISO 8501 Sa2½ 40 to 75µm ISO 8501 St2 or St3 are suitable cleaning methods for mild environments. Galvanized Steel

  Surfaces, Preparation, Steel, Mild, Surface preparation, Carboguard, Carboguard 890

Bitumastic 300M - Carboline

msds.carboline.com

Bitumastic 300M PRODUCT DATA SHEET November 2021 300M Page 2 of 4 PERFORMANCE DATA (TYPICAL VALUES) ASTM B117 Salt FogTest Method Blasted steel 2 Coats 300MSystem Results No blistering, rusting or delamination. No measurable undercutting at scribe after 2000 hours ASTM D2794 Impact Blasted steel 2 Coats 300M Impact site diameter, 9.5, 9.5, 12.7 ...

  030m, Bitumastic 300m, Bitumastic

Carbomastic 15 - Carboline

msds.carboline.com

Generic Type Epoxy Mastic Description Aluminium-pigmented, low-stress, high solids mastic with a proven field history. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or

  Mastic, Carbomastic 15, Carbomastic

Carbozinc 859 - Carboline

msds.carboline.com

Generic Type Organic Zinc Rich Epoxy Description Low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 has less than 360g/litre VOC (thinned) and is used extensively in virtually all industrial markets. Features

  Zinc, Carbozinc, Carbozinc 859

Carbozinc 11 HS - Carboline

msds.carboline.com

These are nominal values. When used as a pre-construction primer thin up to 38 oz/gal using exempt Thinner 236 E. Topcoats Acrylics, Epoxies, Polyurethanes, High Heat Silicones, Silicates and others as recommended by your Carboline sales representative. Not required for certain exposures. A mist-coat/full-coat spray technique is often required to

  Itsm, Carbozinc, Carbozinc 11 hs

Carboguard 893 - Carboline

msds.carboline.com

Brush Use a medium bristle brush. Roller Use a short-nap synthetic roller cover with phenolic core. APPLICATION CONDITIONS Condition Material Surface Ambient Humidity Minimum 4°C (40°F) 4°C (40°F) 4°C (40°F) 0% Maximum 32°C (90°F) 57°C (135°F) 43°C (110°F) 90% This product simply requires the substrate temperature to be above the ...

  Blister, Carboguard, Carboguard 893

Carbothane 134 HG - Carboline

msds.carboline.com

24°C (75°F) 8 Hours 8 Hours 7 Days 32°C (90°F) 4 Hours 4 Hours 5 Days These times are based on a 50 micron dry film thickness. Higher film thickness, insufficient ventilation or cooler temperatures will require longer cure times and could result in solvent entrapment and premature failure. *Maximum self-recoat times are indefinite.

  Carbothane 134 hg, Carbothane

Thermaline 450 EP - Carboline

msds.carboline.com

Surface profile should be a dense angular 1-3 mils and is best achieved through abrasive blasting. Remove all contaminants that would interfere with the performance of stainless steel for the intended service such as, but not limited to, imbedded iron or chlorides.

  Abrasive, Blasting, Abrasive blasting, 450 ep

Carboguard 635 - Carboline

msds.carboline.com

Potable Water Use: (0200) Beige, (0700) Grey and (0800) White Other Colours: Red and Black Gloss Satin Primer Self-priming Recommended Thickness 100 to 150 microns per coat Solid(s) Content By Volume: 65% ± 2% Theoretical Coverage Rates 25.6m²/litre at 25 microns 6.4m²/litre at 100 microns 4.3m²/litre at 150 microns Allow for loss in mixing ...

  Water, Carboguard, Carboguard 635

Related documents

OSHA Glove Selection Chart - Environmental Health and Safety

safety.fsu.edu

As a general rule, the thicker the glove material, the greater the chemical resistance but thick gloves may impair grip and dexterity, having a negative impact on safety. Some examples of chemical-resistant gloves include: ... Lacquer thinners G F F P Lactic acid (85%) VG VG VG VG Lauric acid (36%) VG F VG VG ...

  General, Safety, Thinner

Department of Petroleum Engineering PETE 203: DRILLING ...

www.oilproduction.net

for general laboratory safety and procedures: 1. All students must be familiar with the locations and operational procedures of the Emergency Shower, Fire Extinguishers, Gas Masks and Fire Blankets. These safety devices pictured below. 2. Laboratory coats, safety glasses and safety shoes MUST be worn at all times during the laboratory session.

  General, Safety

General Security and Safety Rules

www.eib.org

The purpose of the General Security and Safety Rules (GSSR) is to draw external companies’ attention to a number of measures taken in the interests of all con-cerned. They constitute a reference document containing useful information for all compa-nies required to undertake work on the Kirchberg Campus.

  Rules, General, Security, Safety, Purpose, General security and safety rules

Technical Data Sheet Application Guide

www.jotun.com

Paint solvents (thinners) shall not be used for general degreasing or preparation of the surface for painting due to the risk of spreading dissolved hydrocarbon contamination. Paint thinners can be used to treat small localized areas of contamination such as marks from marker pens. Use clean, white cotton cloths that are turned and replaced often.

  Guide, General, Applications, Application guide, Thinner

Fire and Life Safety Guidelines for Schools

esa.dc.gov

Volatile and flammable liquids (duplicating fluids, paints, paint thinners, oils, wax, gasoline, etc.) must be stored in approved containers. Use of these materials is prohibited in areas where there are open flames, electrical sparks, and running motors. Bulk storage of such materials must be in specified flammable-liquid storage rooms only ...

  Safety, Thinner

COVID-19 Vaccine Screening and Immunization Documentation

www.vance.af.mil

Safety and Efficacy of COVID-19 vaccines in pregnant women is as of yet unknown. Animal developmental and reproductive toxicity studies are ongoing. In general, there is no evidence that inactivated vaccines pose a risk to a fetus or pregnant woman. Currently, COVID-19 vaccines approved for use by the FDA are considered inactivated vaccines.

  General, Safety

Safety data sheet according to Regulation (EC) No 1907 ...

cdn.wd40company.eu

3-IN-ONE ®Multi-Purpose Oil - [Liquid] Safety data sheet according to Regulation (EC) No 1907/2006, Annex II SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier 3-IN-ONE ®Multi-Purpose Oil - [Liquid] 1.2 Relevant identified uses of the substance or mixture and uses advised against

  Sheet, Data, Safety, Regulations, Purpose, According, Safety data sheet according to regulation

Chartek 1709 - AkzoNobel

international.brand.akzonobel.com

Nov 20, 2017 · General Surfaces must be clean, dry and free from contaminants immediately prior to coating. Application Chartek 1709 should be spray applied to ensure total wetting of the substrate is achieved. Where this is not possible by spray alone, then the first coat should be thoroughly trowelled and rolled to achieve this.

  General

Carbothane 134 HG - Carboline

msds.carboline.com

Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied. Ratio 4:1 Ratio (A to B) Pot Life 4 Hours at 24°C and less at higher temps. …

  Carbothane 134 hg, Carbothane, Thinner

Related search queries

Safety, General, Thinners, General Security and Safety Rules, Purpose, Application Guide, Safety data sheet according to Regulation EC, Carbothane 134 HG