PDF4PRO ⚡AMP

Modern search engine that looking for books and documents around the web

Example: stock market

DESIGN GUIDELINE 230030 LABORATORY VENTILATION

LABORATORY VENTILATION DG 230030 OCTOBER 2016 PAGE 1 OF 24 DESIGN GUIDELINE 230030 LABORATORY VENTILATION Information for mechanical DESIGN engineers as well as architects/lab planners regarding LABORATORY VENTILATION DESIGN at U-M, including but not limited to the following: Equipment information (chemical fume hoods, chemical storage cabinets, BSCs, specialty hoods, and environmental rooms). Computational Fluid Dynamic and exhaust stack dispersion modeling requirements. Lab HVAC and exhaust DESIGN : guidance regarding lab minimum air change rates, duct materials, exhaust fan selection, system diversity, future capacity, etc. Vivarium requirements. Type and control of terminal airflow units for laboratories. Lab energy conservation. Related Sections U-M DESIGN GUIDELINE Sections: SBA - Animal Facilities Sustainability - Energy and Water Conservation 115313 LABORATORY Fume Hoods 230900 Mechanical Systems Controls U-M Master Specification Sections: 115313 LABORATORY Chemical Fume Hoods 230593 Testing Adjusting, and Balancing 233600 Air Terminal Units 230900 Mechanical Systems Controls 230910 VAV/Combination Sash Fume Ho

LABORATORY VENTILATION DG 230030 OCTOBER 2016 PAGE 1 OF 24 DESIGN GUIDELINE 230030 LABORATORY VENTILATION Information for mechanical design engineers as well as architects/lab planners regarding laboratory ventilation design at U-M, including but not limited to the following:

Fullscreen Download

Tags:

  Laboratory, Ventilation, Laboratory ventilation

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Spam in document Broken preview Other abuse

Transcription of DESIGN GUIDELINE 230030 LABORATORY VENTILATION

Documents from same domain

DESIGN GUIDELINE 5.2 ANIMAL FACILITIES

umaec.umich.edu

4.7 SBA Building Access Control 6.0 DG 230030 - Laboratory Ventilation 6.0 DG 263000 - Engine-Generator System . Reference Documents: “Guide for Care and Use of Laboratory Animals” , promulgated by United States Department of Health and Human Services, and the Regulations of the Federal Animal Welfare Act 9, CFR Parts ,1 2 and 3

  Animal

DESIGN GUIDELINE 220020 HIGH PURITY WATER SYSTEMS

umaec.umich.edu

requirements. High purity water systems typically have high first and on going operational costs, therefore the A/E shall take particular care not to “over-specify” the system. The proposed system performance will be presented no later th en SD phase, for approval by the U …

  Phases, Water

DESIGN GUIDELINE 5.6 PARKING STRUCTURES

umaec.umich.edu

Architectural Design equirements ... Structure decks sh all be either cast -in-place reinforced concrete or constructed with precast double tees with a minimum 4” top of tee or any other tested and approved technology for parking ... panels except as required by to be fire rated. Fire rated door assemblies shall be factory Code

  Trade, Fire, Concrete, Architectural, Fire rated

Electrical Acceptance Tests

umaec.umich.edu

A 1,000 volt DC megger test and a turns ratio test shall be performed on CT's and PT's. The metering shall be calibrated. Engine-Generators and Automatic Transfer Switches . A continuity check and 1,000 volt DC megger test shall be performed on the generator

  Generators

GROUNDING AND BONDING FOR ELECTRICAL

umaec.umich.edu

Grounding systemconductors making up the grounding mat and associated ground risers, and/or for encasement in concrete shall be No. 4/0 AWG bare, stranded copper. Ground conductors for power distribution equipment,all end-use equipment and all branch circuits, shall be insulated stranded copper conductors, color coded greenor (a continuous)

  Bonding, Grounding, Grounding and bonding

Commissioning Plan

umaec.umich.edu

The Commissioning Plan is the vehicle by which the Cx process is planned and documented. The draft version of the Cx Plan for this project was produced by the Commissioning Authority (CxA). The Owner’s Commissioning Authority and the Contractor are responsible for developing the final Commissioning Plan and executing all commissioning activities.

  Plan, Commissioning, Commissioning plan

Design Deliverables - Architecture Engineering and ...

umaec.umich.edu

On the "Design Deliverables" document, the Design Professional shall indicate the status of each required item (a check mark is interpreted to mean that an item has been included in the deliverables). On or attached to the "Design Deliverables" document, the Design Professional shall identify all items NOT included in the review package.

  Design

Related documents

Laboratory Ventilation ACH Rates Standards and Guidelines

www.aircuity.com

Jan 03, 2012 · The Laboratory Facility” the following sections 4(a) and 4(f) are the only sections potentially relevant to lab air change rates: 4. Ventilation (a) General laboratory ventilation. This system should: Provide a source of air for breathing and for input to local ventilation devices (199); it should not be relied on for protection from

  General, Laboratory, Ventilation, Laboratory ventilation, General laboratory ventilation

CALIFORNIA RETAIL FOOD CODE Excerpt from CALIFORNIA …

www.cdph.ca.gov

(1) The additional criteria are based on other provisions of this part. (2) A violation is identified by reference to items and sections of this part, or the regulations adopted pursuant to this part relating to those items, if a food facility is cited for a violation of the additional criteria.

  Part

LABORATORY BIOSAFETY MANUAL - WHO

www.who.int

laboratory designations, and Table 3 summarizes the requirements at the four biosafety levels. Table 1. Classification of infective microorganisms by risk group a

  Manual, Laboratory, Laboratory biosafety manual, Biosafety

Related search queries

Laboratory Ventilation, Laboratory, Ventilation, General laboratory ventilation, Part, LABORATORY BIOSAFETY MANUAL