FERTILIZER SPREADER CALIBRA TION - Simplot

Method #11. Fill SPREADER with a weighed amount of Layout calibration area in length. 100 , 50 , 200 , Apply the FERTILIZER the length of the Measure the width of the Weigh the remaining FERTILIZER in the SPREADER and subtract this amount fromthe amount you started you have all the variables for calculation. Length, width, and amount offertilizer x width = of areaExample: 7 spread x 100 run = 700 of areaIf you applied 5 lbs. of FERTILIZER in this area, then you applied 5#/700 can then use a ratio to find the rate/1000 or :You spread 5#/700 # :: Xcross multiply the ratio 700 x X = 5 x 1000 or 700X = 5000700 1000 then: X = 5000and X = 700 Thus: you applied a little more than 7 lbs. of FERTILIZER per 1000 you were using Turf Supreme then the SPREADER setting would need to beclosed to apply the recommended rate of # #21.

Method #1 1. Fill spreader with a weighed amount of fertilizer. 2. Layout calibration area in length. 100’, 50’, 200’, etc. 3. Apply the fertilizer the length of the run.

Tags:

  Into, Fertilizers, Spreader, Fertilizer spreader calibra tion, Calibra

Information

Related search queries