Transcription of Frequently Asked Questions - Flow Control
{{id}} {{{paragraph}}}
Frequently Asked Questions System and Valve Basics: 1. Q: What is good cooling coil performance? A: The temperature range is controlled within +/- F ( C) off the cooling coil at set point or below. Also, the coil delta T exceeds design, even at part load. 2. Q: What is delta T and why is it important? A: Delta T is the difference between the water return and supply temperature through a heating or cooling coil. All HVAC hydronics systems have a design delta T; however, this objective is rarely achieved at part load. Delta T is the single most effective indicator of system performance. The higher delta T, the less flow required to serve the load. 3. How fast will the leaving air temperature change when the coil flow rate varies?
A: A modulating pressure independent control valve does not allow a change in flow rate when the pressure differential across the valve changes. Flow only changes with a change in valve
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document:
{{id}} {{{paragraph}}}
Electric Flow Control Valve, Electric Flow Control Valve Electric Flow Control Valve, Control, High pressure, Valve, Control Valve, Applying Pressure Independent Control Valves, Pressure, 100DHPTM CCI DRAG Control Valve For High Pressure, Control pressure, High, Sinclair Collins High Pressure Valves, 4” Inline Pressure Control Valves, Eaton, Pressure Control Valve, November 2012 Handbook on pressure loss and valve sizing, Pressure loss and valve sizing, Safety Warning — LP-Gas Pressure Relief, Pressure drop