Transcription of GUIDE D’INSTALLATION - lamson-home.com
{{id}} {{{paragraph}}}
INSTRUCTION GUIDE cover rmly to mounting surface. 2. Drill 7/32" hole into wall for plastic anchor. Place anchor into hole and install silver 3. For screw mounting: screw. A) Place Button back cover where desired and mark screw locations. 3. Leave screw head extending about 1/4" from wall. Battery Door Chime RC3410/RC3510D/RC3513D/RC3520/ B) Place Button back cover against mounting surface and screw into marked 4. Slide Receiver base onto screw and lock into slot. RC3610/RC3624/RC3676 locations using screws enclosed (may require drilling pilot holes on hard- Note: The RC3510D and RC3513D Weatherproof Receiver can sit or mount on any Congratulations on a wise purchase! woods). surface, horizontally or vertically, indoors or outdoors. ENCLOSED YOU WILL FIND: RECEIVER BATTERY installation TEST. Chime Receiver 1. Remove front cover and install 4 "C" alkaline batteries in battery compartment. Press Chime Button(s). Receiver should play a tone.
cover firmly to mounting surface. 3. For screw mounting: A) Place Button back cover where desired and mark screw locations. B) Place Button back cover against mounting surface and screw into marked
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document:
{{id}} {{{paragraph}}}