HILTI HSA EXPANSION ANCHOR - Hilti United Kingdom

HSA Expansion anchor Everyday standard expansion anchor for uncracked concrete Anchor version Benefits HSA HSA-F HSA-R HSA-R2 (M6-M20) - Fast & convenient setting behaviour - Reliable ETA approved torqueing using impact wrench with the innovative SIW 6AT-A22 and SI-AT-A22 system for automatic torqueing - Small edge and spacing distances - High ...

  Expansion, Anchor, Expansion anchor

HST-3 EXPANSION ANCHOR

concrete C 12/15 to C 80/95* - Highly reliable and safe anchor for structural seismic design with ETA C1/C2 assessment - Longer embedment depth option to get higher resistance, closer distance to the ... Certificate of compliance FM 003053697 / 2016-01-25 0003053697 Shock approval M10 - M24 BABS, Spiez Laboratory BZS D 08-602 / 2019-01-29 ...

DESIGN OF FASTENINGS IN CONCRETE - Hilti

Eurocodes are European standards for the design of buildings and civil engineering infrastructure. ... • Will be supported with national annexes published by local governmental entities • Creates high awareness for cracked concrete usage as a mandatory standard

  National, Annexes, Eurocode, National annexes

HIT-HY 170 INJECTION MORTAR - Hilti

Technical Assessment CE conformity Corrosion resistance High corrosion resistance a) a) Applications only with HAS-U anchor rods. a) All data given in this section according to ETA-19/0465, issue 2019-08-28. b) All data given in this section according to ETA-14/0457, issue 2017-12-14. ... Threaded rod, Strength class 8.8; Elongation at fracture ...

  Data, Technical, Threaded, Threaded rod

TOOL SELECTOR - Hilti

Rotary Hammers - hammer drilling 3 - 4 Combihammers - hammer drilling concrete 5 - 7 ... Vibration values Impact Fastening EAV The "Exposure Action Value" (EAV) of 2.5 m/s² is the safer limit and can be worked to without any additional controls in place ... noise 3dB. Drilling Productivity data Number of holes to EAV 2.5 m/s2 (ELV 5 m/s2) for ...

  Tool, Impact, Noise, Hammer, Selector, Tool selector

HIT-HY 270 INJECTION MORTAR - Hilti

European technical assessment DIBt, Berlin ETA-13/1036 / 2017-12-12 European technical assessment DIBt, Berlin ETA-19/0160 / 2019-04-29 Hilti Technical Data a) Hilti 2019-05-20 Fire test report MFPA, Leipzig PB 3.2/14-179-1 / 2014-09-05

  Data, Technical, Technical data

HIT-HY 200-A/R INJECTION MORTAR - Hilti

Hilti HIT- HY 200-A 500 ml foil pack (also available as 330 ml foil pack) -SafeSet technology: Simplified method of borehole preparation using either Hilti hollow drill bit for hammer drilling or Roughening tool for diamond cored applications - Suitable for non-cracked and

  Hilti, Hilti hit, Hy 200

Hilti Firestop Binder; Hilti CP 606 Flexible firestop Sealant

Intumescent fi restop fi ller CP 606 Applications Sealing drywall partition connections & header joints ... Smooth firestop sealant with a trowel before the skin forms. Once cured, CP 606 can only be removed mechanically. 5. For maintenance reasons, a penetration seal can be

  Sealant, Intumescent

Anchoring To Concrete - PDHonline.com

A concrete anchor is a steel shaft either cast into concrete at placement or post-installed after the concrete has hardened. Cast-in anchors are threaded shafts with a buried end termination of a hex head, threaded nut, or 90° (L-) or 180° (J-) hook, or headed (non-threaded) studs welded to a …

  Concrete, Anchor, Concrete anchors

HIT-HY 200-A/R INJECTION MORTAR - Hilti

cracked concrete C 20/25 to C 50/60 - ETA Approved for seismic performance category C1, C2a) - Maximum load performance in cracked concrete and non-cracked concrete - 100 years service lifetime resistanceb) - Small edge distance and anchor spacing possible - Manual cleaning for borehole diameter up to 20mm and h ef≤10d for non-cracked ...

  Concrete, Anchor

Hit RE-100 Adhesive Anchor Product Data - BuildSite.com

addition to the slow cure adhesive anchor portfolio and designed for solid performance in a wide range of applications. Designed to utilize the existing Hilti dispenser platform and ICC-ES approved for cracked and uncracked concrete, this anchor is the perfect complement to the portfolio for day to day jobsite needs. PERFORMANCE

  Concrete, Anchor

HIT-RE 500 with HIT-V / HAS rods - Hilti

One anchor material, as specified in the tables Non cracked concrete f c,cyl = 32 MPa Temperate range I (min. base material temperature -40°C, max. long term/short term base material temperature: +24°C/40°C) Installation temperature range +5°C to +40°C Embedment depth and base material thickness for the basic loading data Recommended loads

  Concrete, Anchor

Anchors: High Precision Model-Agnostic Explanations

coverage to the model’s behavior (the anchor on the right of Figure 2b is broader) and making their boundaries clear. Leaving the discussion of how to compute anchors for later, we now demonstrate their usefulness and flexibility via concrete examples in a variety of domains and models. Text Classification: We have already alluded to Figure 1,

  Concrete, Anchor

STABILITY ANALYSIS OF CONCRETE STRUCTURES

concrete structures addressed in this manual include dams, locks, retaining walls, inland floodwalls, coastal floodwalls, spillways, outlet works, hydroelectric power plants, pumping plants, and U-channels. The structures may be founded on rock or soil and have either flat or sloped bases. Pile-founded structures, sheet-pile structures, and

  Concrete

EFFECTS OF AGGREGATE TYPE, SIZE, AND CONTENT ON …

concrete, principally about the effects on fracture energy. Some research (Strange and Bryant 1979, Nallathambi, Karihaloo, and Heaton 1984) has shown that there is an

  Concrete, Aggregate