INSTALLATION INSTRUCTIONS - Drawtite.com

INSTALLATION INSTRUCTIONSSWAY Assembly41 Bar - Ball Mounting (sold separately)1a1 Ball51 Handle, On/Off1b1 Nut, Hex, 5/8-1161 Slide Bar1c1 Lock Washer71 Bolt, Tension Adjusting21 Fastener Kit81 Grip, Handle2a6 Screw, Self Tapping 24-9 X 191 Compression Plate Ass'y2b2 Clip101 Washer, Hardened31 Ball/Plate Assembly111 Main Body Ass'yFIGURE 1 READ ALL INSTRUCTIONS AND CHECK PACKAGE control CANNOT BE USED ON TRAILERS WITH SURGE BRAKES. DO NOT USE SWAY control ON CLASS I HITCHES. loading: Proper trailer loading is your first-line defense against dangerous instability and sway. Heavy items should be placed on the floor in front of the axle. The load should be balanced side-to-side and secured to prevent shifting. Tongue weight should be about 10-15 percent of gross trailer weight for most trailers. Too low apercentage of tongue weight can cause sway. Load the trailer heavier in handle (5) is an on/off device. The bolt (7) below is for adjustment towing during slippery conditions such as wet, icy, or snow-covered roads or on loose gravel, turn on/off handle (5) counterclockwise until all tension is removed from unit.

INSTALLATION INSTRUCTIONS SWAY CONTROL 3 4 5 6 1a 1b 1c 2a 2b 2b 7 2 1 11 8 10 9 REF. QTY. DESCRIPTION REF. QTY. DESCRIPTION 1 1 Ball Assembly 4 1 Bar - Ball Mounting ...

Loading..

Tags:

  Installation, Control, Instructions, Installation instructions

Information

Related search queries