Transcription of Intergard 821 - AkzoNobel
{{id}} {{{paragraph}}}
Example: biology
Intergard 821 - AkzoNobel
A two pack epoxy DESCRIPTIONFor use as an anode shield and as a filler for pitted use at Newbuilding, Maintenance & Repair or On Board USESEAA820-Grey100% (ISO 3233:1998)6000 microns dry (6000 microns wet) for use as an Anode Shield, up to 20,000 microns may be used as a m /litre at 6000 microns dft, allow appropriate loss factorsTrowelPRODUCT INFORMATIONV olume SolidsTypical Film ThicknessTheoretical CoverageMethod of ApplicationFinish/SheenNot applicablePart B (Curing Agent)EAA821 Mix volume(s) Part A to 1 volume(s) Part BFlash Point (Typical)Part A 65 C; Part B 62 C; Mixed 62 CInduction PeriodNot requiredOvercoating Data - see limitationsSubstrate TemperatureColourDrying Information 5 C10 C23 C35 C Touch Dry [ISO 9117/3:2010]10 hrs9 hrs6 hrs2 hrs Hard Dry [ISO 9117-1:2009]48 hrs42 hrs24 hrs12 hrs Pot Life4 hrs3 hrs60 mins20 minsOvercoated By 5 C10 C23 C35 CMinMaxMinMaxMinMaxMinMaxMay be overcoated with Intergard and Intertuf products, consult International Paint for specific 821 48 hrs7 days42 hrs5 days24 hrs48 hrs12 hrs24 hrsREGULATORY DATAVOCNote: VOC values are typical and are provided for guidance purposes only.
Dec 04, 2015 · contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. SURFACE PREPARATIONS ANODE SHIELDS NEWBUILDING/MAJOR REFURBISHMENT Where necessary, remove weld spatter and smooth weld seams and sharp edges. Abrasive blast clean to Sa2½ (ISO 8501-1:2007). If oxidation has occurred between …
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: