Transcription of MATERIAL DATA SHEETS FOR PIPING - Standard
{{id}} {{{paragraph}}}
Example: confidence
MATERIAL DATA SHEETS FOR PIPING - Standard
M-CR-630, Rev. 1, December 1994 page 1 NORSOK Standard COMMON REQUIREMENTS MATERIAL data SHEETS FOR PIPING M-CR-630 Rev. 1, December 1994 Please note that whilst every effort has been made to ensure the accuracy of the NORSOK standards neither OLF nor TBL or any of their members will assume liability for any use thereof. 1 FOREWORD This Standard has been developed by the NORSOK standardisation work group and agreed by the Norwegian industry for the widest possible national and international application. Note: Materials of Type 6Mo and 25 Cr duplex manufactured prior to can be accepted provided the following is satisfied: - Corrosion tests have been carried out with acceptance criteria for pitting and weight loss according to NORSOK MDS es at 40 C. - The microstructure is free from all grain boundary carbides and intermetallic phases.
MATERIAL DATA SHEETS FOR PIPING M-CR-630 Rev. 1, December 1994 Please note that whilst every effort has been made to ensure the accuracy of the NORSOK standards neither OLF nor TBL or any of their members will assume liability for any use thereof. 1 FOREWORD This standard has been developed by the NORSOK standardisation work group and agreed by the
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: