Transcription of MATERIALS SELECTION - Standard
{{id}} {{{paragraph}}}
Example: bankruptcy
MATERIALS SELECTION - Standard
M-DP-001, Rev. 1, December 1994 page 1 NORSOK Standard DESIGN PRINCIPLES MATERIALS SELECTION M-DP-001 Rev. 1, December 1994 Please note that whilst every effort has been made to ensure the accuracy of the NORSOK standards neither OLF nor TBL or any of their members will assume liability for any use thereof. 1 FOREWORD This Standard has been developed by the NORSOK standardisation work group and agreed by the Norwegian industry for the widest possible national and international application. 2 SCOPE The scope of this Standard is to provide general principles, engineering guidance and requirements for material SELECTION and corrosion protection for all parts of offshore installations.
5.3 Corrosivity and corrosion protection 5.3.1 Corrosion allowance For carbon steel piping, a corrosion allowance of 3 mm shall be used, unless higher corrosion allowances are required. Recommendation: For submarine pipeline systems a total corrosion allowance of 10 mm is recommended as a general upper limit for use of carbon steel.
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: