Transcription of MODEL SS2 INSTALLATION INSTRUCTIONS - Tjernlund
{{id}} {{{paragraph}}}
Example: biology
MODEL SS2 INSTALLATION INSTRUCTIONS - Tjernlund
Copyright 2003, Tjernlund Products, Inc. All rights 8504105 OWNER INSTRUCTIONS , DO NOT DESTROYR ecognize this symbol as an indication of important safety information!NOTE:MAXIMUM FLUE GAS TEMPERATURES MUST NOT EXCEED 650oF(343O C) MINIMUM TEMPERATURE MUST BE 250O F (121O C) AT VENT SYSTEM INLET. THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED, LICENSED SERVICE PER-SONNEL FOR PROPER INSTALLATION , ADJUSTMENT AND OPERATION OF THIS THESE INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING INSTALLATION OROPERATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN IMPROPERINSTALLATION, ADJUSTMENT, SERVICE OR MAINTENANCE POSSIBLY RESULTING IN FIRE,ELECTRICAL SHOCK, CARBON MONOXIDE POISONING, EXPLOSION, PERSONAL INJURYOR PROPERTY DAMAGE. NOTE:Oil burner capacities exceeding 1 GPH may require the burner to be adjusted to more efficient ( CO2) than typical levels to maintain recommended over-fire draft settings. See Oil Draft Adjustment Procedure on page 15 of this manual or consult factory at 1-800-255-4208 with questions prior to INSTALLATION .
SPECIFICATIONS Motor: 115/1/60, 3000 RPM, 1/25 HP, 1.6 FLA, Ball Bearing Permanently Lubricated. Fan Proving Switch: Non-adjustable set point of -.40” W.C. on pressure drop. High Limit: Manual reset N/C contacts, open at 170oF + 8oF (77oC + 5oC). UC1 Universal Control: See UC1 Universal Control Board Features on page 4. Cooling Fan: 115/1/60, RPM 3000, AMPS .2, …
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: