Transcription of Standard Test Method for Free Water and Particulate ...
{{id}} {{{paragraph}}}
Designation: D4176 04 (Reapproved 2009) Standard Test Method forFree Water and Particulate contamination in distillate Fuels(Visual Inspection Procedures)1 This Standard is issued under the fixed designation D4176; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon ( ) indicates an editorial change since the last revision or Standard has been approved for use by agencies of the Department of This test Method covers two procedures for estimatingthe presence of suspended free Water and solid particulatecontamination in distillate fuels having distillation end pointsbelow 400 C and an ASTM color of 5 or Both procedures can be used as field tests at storagetemperatures, or as laboratory tests at controlled Procedure 1 provides a rapid pass/fail Method forcontamination. Procedure 2 provides a gross numerical ratingof haze The values stated in SI units are to be regarded asstandard.
Designation: D4176 – 04 (Reapproved 2009) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) 1 This standard is issued under the fixed designation D4176; the number immediately following the designation indicates the year of
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document:
{{id}} {{{paragraph}}}
General Services Administration Standard Test Method, Standard Test Method for, Standard, Proposed standard glue strength testing method, Standard test method, Test Method, Standard Test Method for Density, Relative Density, Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations1, The Resistance to Thermal Transmission of, Fracture Toughness, Standard Test Method for Tension Testing, Standard Guide for Accelerated Aging of Sterile