LAD6 6” LED Architectural Downlight

6” LED Architectural Downlight. Features & Specifications (cont.) Performance. New Construction Housing/Plaster Frame • Designed for use in non-insulated ceiling where insulation must be kept a. minimum of 3” from the fixture. • Junction box listed for (8) #12 AWG (four in, four out) 90°C conductors. and thru branch wiring.

  Downlight

IP66 IK08 - lsicorp.com

• IP66 rated Luminaire per IEC 60598. • 3G rated for ANSI C136.31 high vibration applications are qualified. • DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.

  60598, Iec 60598

LED INGROUND LIGHT (XIG)

LED INGROUND LIGHT (XIG) EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance. LEDS - Select high-brightness LEDs in Cool White (5000K) or Warm White (3500K) color temperature. 68CRI DRIVER CURRENT - Available in 350mA

Commerical Area Small (SSA) - lsicorp.com

• IP65 rated Luminaire per IEC 60598 • 1.5G rated for ANSI C136.31 high vibration applicationsapplicationsare qualified. • DesignLights Consortium® (DLC) qualified ... 14 2 (7 mm) 78 (22 mm) 0.778 516 2364 8 (203 mm) Pole Side for B2 Drill Pattern For Mast Arm Tenon

  60598

Scottsdale® Legacy (CRUS)

performance data for specifics.) Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location (see performance data for specifics.) Hazardous Location • Designed for lighter than air fuel applications. Product is suitable for Class 1 Divisions 2 only when properly installed per LSI installation instructions.

  Product, Data

Mirada Large (MRL)

Pole-Mounted Occupancy Sensor (24V)8,9 663284CLR Shorting Cap for use with CR7P7 149328 Fusing Options10 Description Order Number Single Fusing (120V) See Fusing Accessory Guide Single Fusing (277V) Double Fusing (208V, 240V) Double Fusing (480V) Double Fusing (347V) Shielding & Miscellaneous Accessories Description Order Number Integral Louver ...

  Guide, Sensor, Occupancy, Occupancy sensor

SDL4’ LED Strip Diffused Lens

sdl4 delivered lumens* 3000k cct 3500k cct 4000k cct 5000k cct lumen package cri delivered lumens efficacy delivered lumens efficacy delivered lumens efficacy delivered lumens efficacy wattage 20l 80 1947 120.3 2015 132.6 2009 132.2 2148 140.4 15.2 30l 80 2930 125.5 3041 134.6 3032 134.2 3242 143.4 22.6 40l 80 3879 128.9 4026 133.8 4014 133.4 ...

  Lumen

Mirada Medium Wall Sconce (XWM) - LSI Industries

Electrical • High-performance programmable driver features over-voltage, under-voltage, short-circuit and over temperature protection. Custom lumen and wattage packages available. • 0-10V dimming (10% - 100%) standard. • Standard Universal Voltage (120-277 Vac) Input 50/60 Hz or optional High Voltage (347-480 Vac).

  Electrical

Mirada Small Area (MRS)

Installation • Designed to mount to square or round poles. ... 10’ Linear Bird Spike Kit (2’ Recommended per Luminaire) 751632 Shielding Options Mirada Small See Shielding Guide Mirada Medium Mirada Large Zone Medium Zone Large Slice Medium. LSI Industries Inc. 10000 Alliance Rd Cincinnati OH 45242 wwwlsi-industriescom

  Guide, Installation, Bird, Spike, Bird spike

Scottsdale VertexTM (SCV) Petroleum Canopy LED Luminaire

Scottsdale Vertex TM (SCV) Petroleum Canopy LED Luminaire FEATURES & SPECIFICATIONS Construction • Rugged low-profile die-cast aluminum housing, optical unit, and driver cover. • Below canopy access to optical chamber and driver housing for serviceability. • IP66 rated luminaire protects integral components from dust and water.

  Scottsdale

TECHNICAL DESIGN CATALOG - Steeler

is manufactured from light gauge steel meetings the requirements of ASTM A653-02a or equal. Typical uses for hemmed angle include bridging, bracing, blocking, and other situations that would require light gauge angles. In addition to angles, STEELER® offers hemming on most 25 gauge products such as Sound Resilient

  Design, Catalog, Technical, Steel, Light, Gauge, Light gauge steel, Gauge light, Technical design catalog

FORD STEEL SERVICE BODIES - Knapheide

INTERIOR LIGHT GUARDS COMPARTMENT FEATURES protect recessed lighting and wiring FEATURES NOT SHOWN 4 5 C. INTERIOR COVER protects internal latch from damage A. DOUBLE-SHELL, 20-GAUGE, TWO-SIDED A-40 GALVANNEAL STEEL compartment doors STREET AND CURB SIDE FRONT VERTICAL COMPARTMENTS Two adjustable divider …

  Services, Steel, Light, Gauge, Ford, Bodies, Ford steel service bodies

FITTINS Pipe Fittings - Swagelok

316 stainless steel, carbon steel, brass, 6-Moly, Alloy 625, Alloy 825, and Alloy 2507 ... Gauge Adapter, Reducing Page 8 Pipe Caps Page 22 Pipe PlugsPage Page 22 Reducing Bushings, Reducers Page 14 ... ISO 228-1 Threads with Light-Duty Stud Ends with Sealing by O-ring with Retaining Ring (types G and ...

  Steel, Light, Gauge, Swagelok

TOM ROSTER’S 2016 NONTOXIC SHOT LETHALITY TABLE

Northern Bobwhite Quail 20-30 Steel 8 to 7 ⅝-¾ 1-2 200-210 Imp. Cyl., Light Modified Swatter Load For Wounded Birds 20-30 Steel 7 to 6 1 1 175 Improved Modified, Full This table summarizes Tom Roster’s analyses to date of the lethality data bases for certain of the 16 U.S. steel vs lead waterfowl & dove shooting tests published between ...

  Steel, Light

Millermatic 211 - Miller - Welding Equipment

Light Industrial Applications Light fabrication Maintenance and repair Auto body Farm/home Issued March 2019 † Index No. DC/12.58 Weld Thickness 120 V: 24 ga.–3/16 in. steel 18 ga.–1/8 in. aluminum 240 V: 24 ga.–3/8 in. steel 18 ga.–3/8 in. aluminum Input Power 120 V: 24.3 A, single-phase, 50/60 Hz 240 V: 16.6 A, single-phase, 50/60 ...

  Steel, Light

Design Guide for Steel Railway Bridges

applicable to ‘light rail’ applications, although the different balance between static and live loading for such structures will affect design. The guidance in this publication is intended to assist designers with the design of conventional rail bridges. Unusual forms of construction and temporary steel

  Steel, Light

5 DESIGN OF TENSION MEMBERS - steel-insdag.org

Eqn.4, that as the pitch distance, p, increases and the gauge distance, g, decreases, the net effective area corresponding to the staggered section increases and becomes greater than the net area corresponding to single bolt hole. This occurs when p2 /4g >d (5) When multiple holes are arranged in a staggered fashion in a plate as shown in Fig.6 ...

  Steel, Gauge

Light Steel Framing Design Standards

competitiveness of cold-formed steel framing in residential and light commercial building construction through improved design and installation standards. 1-2. Member versus System Design 1-3. Design Standards. Prescriptive Methods. Requirements for engineered or prescriptive design. Specification.

  Steel, Light, Light steel