SURFACE PREPARATION IMPORTANT READ CAREFULLY! …

RUBBERC lean well using detergent or cleaning solvent,removingall oil,gr ease,w ax and dirt. Rinse well and allow to SURFACE aggressively and then clean with Xylene(Xylol),Acetone or MEK cleaning solution. Allow solvent to drycompletely before applying HERCULINER. HERCULINER coat-ing will not bond to chlorinated adhesion can be obtained on unweathered gel-coated glass,rough fiber,side molded glass,andsmooth-mold resin-side glass. SURFACE should be free ofoils,w axes and other production additives,then sandedto remove all gloss,leaving a rough TO APPLYHERCULINER may be applied with a brush,roller,or spraygun. A roller will provide the roughest final texture; aspray gun the can be applied between 32 F and 95 applying HERCULINER,it is IMPORTANT that the SURFACE to be coated is completely clean. (See SURFACE PREPARATION ).Mask all areas not to be coated.

LINER.) Extreme climate conditions of heat,cold and humidity can shorten or lengthen this period. COVERAGE (2 COATS) One quart covers a flat area of about 15 square feet. One gallon covers 55 to 60 square feet,with a final dry coat thickness of 1/16- 1/32of an inch. •Be thoroughly cleaned with a muriatic acid wash. 1.Use 45% to 50% muriatic ...

Loading..

Tags:

  Liner

Information

Related search queries