Transcription of Symptom Possible Causes Solution - Lutron Electronics, Inc.
{{id}} {{{paragraph}}}
Example: air traffic controller
Symptom Possible Causes Solution - Lutron Electronics, Inc.
Troubleshooting GuideMaestro occupancy sensing switchSymptomPossible CausesSolutionCannot switch power ON or OFF with the newly installed sensor wire is not connected to green wire to ground . ground is required for the sensor switch to :MS-OPS2MS-VPS2MS-OPS5 MMS-VPS5M, MS-OPS6M2-DVMS-VPS6M2-DVWhite wire is not connected to white wire to is required for the sensor switch to function. Models:MS-OPS6M2N-DV MS-VPS6M2N-DVLights do not turn ON when space is mode is set to Manual-On (Vacancy).Refer to instructions to change custom settings.*Sensor Mode is set to Auto-On Daylight Sensing (ALD) and the light level in the room is too the lights on within 5 seconds upon entering the room to change the daylight does not have full view of objects blocking the sensor s / 3-way wiring may be to wiring diagrams in instructions.*see GuideMaestro occupancy sensing switchSymptomPossible CausesSolutionLights turn back ON after they are manually turned mode is set to Auto-On and Auto-Off (Occupancy).
connected to ground. Connect green wire to ground. Ground is required for the sensor switch to function. Models: MS-OPS2 MS-VPS2 MS-OPS5M MS-VPS5M, MS-OPS6M2-DV MS-VPS6M2-DV White wire is not connected to neutral. Connect white wire to neutral. Neutral is required for the sensor switch to function. Models: MS-OPS6M2N-DV MS-VPS6M2N-DV Lights do ...
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: