HE784 - AQUA-BLOC® WB - henry.com

Limited Warranty We, the manufacturer, warrant only that this product is free of defects, since many factors which affect the results obtained from this product - such as weather, workmanship, equipment utilized and prior condition of the substrate - are

TECHNICAL DATA SHEET - Henry

Impermeable to air, moisture vapor and water Compatible with Henry® Air-Bloc fluid applied air barriers Self-gasketing when penetrated and under compression with self-tapping screws Usage Blueskin SA is designed for use as a self-adhered air, vapor and water resistive barrier. It can also be used as a transition sheet

  Sheet, Data, Technical, Barriers, Water, Technical data sheet, Resistive, Air barrier, Water resistive

Henry Blueskin VP160 Air Barrier System Installation Manual

3 1. Introduction This installation manual includes materials and installation procedures for Henry® Blueskin® VP160 Self-Adhered Water Resistive Air Barrier system. Blueskin® VP160 meets the current IBC and IECC air barrier requirements for a water resistive barrier (WRB) as referenced in ICC ESR-2975.

  Installation, Water, Resistive, Water resistive, Water resistive air

TECHNICAL DATA SHEET - Henry

Air Permeance - Material @1.57psf (75Pa) 0.0001 cfm/ft² (0.0005 L/[sec-m²]) ASTM E2178 Air Leakage - Assembly Pass ASTM E2357 Elongation 250% ASTM D412 Tensile Strength 140 psi (965 kPa) ASTM D412 Flame Spread Index 10, Class A ASTM E84 Smoke Developed 15, Class A ASTM E84 Fire Testing Complies with NFPA 285 in various wall

  Sheet, Data, Testing, Technical, Technical data sheet, Leakage, Air leakage

Henry 925 BES Sealant

Henry® 925 BES Sealant is a premium, moisture cure sealant for construction joints subject to dynamic joint movement. This one-part, low odor, moisture cure product provides excellent weathering resistance, flexibility, very low VOC, through use of a silyl-terminated polyether (STPE) polymer. Upon curing, it is paintable with latex based paints.

  Product, Sealant

TECHNICAL DATA SHEET - Henry

cast-in-place concrete, concrete block, steel, aluminum and galvanized metal. Strike masonry joints full-flush. Concrete surfaces must be smooth and without large voids, spalled areas or sharp protrusions. Concrete must be cured a minimum of 14 days. Curing

  Sheet, Data, Technical, Steel, Technical data sheet, Galvanized

Air-Bloc All Weather STPE

Henry® Air-Bloc All-Weather STPE is a low VOC, UV and fire-resistant fluid applied, elastomeric membrane designed to provide a vapor permeable, water resistive air barrier when applied to above-grade wall assemblies. It is single-component, moisture cure

  Water, Step, Weather, Resistive, Water resistive air, All weather stpe

TECHNICAL DATA SHEET Blueskin WP200 - Henry

REVISION: 02/27/17 Henry Company 999 N. Sepulveda, Ste 800, El Segundo CA 90245-2754 Technical Services- Phone (800) 486-1278 – Email: techservices@henry.com www.henry.com Blueskin WP 200 Self-Adhesive Waterproofing Membrane Uses Blueskin WP200 is designed for use as a self-adhered s heet waterproofing membrane in above or below grade applications.

  Sheet, Data, Data sheet, Heet, Sh eet

Air & Water Barrier Membrane - Henry

Concrete . ASTM C836 load suction pressure-Low Temperature Flexibility and Crack Bridging @ –20°C . ASTM C836 -Aging-Long Term Flexibility . CGSB 71 -GP-24M -Nail Sealability . ASTM D1970 --Resistance to Mold, Mildew & Fungal growth . ASTM D5590 . ASTM E84-VOC Content . Gray . 60% . 10.8 lbs/gal (1.3 kg/l) 2 Hours to touch dry . 24 Hours to ...

  Concrete, Nail

WATERPROOFING SYSTEMS - Henry

Secondary Containment Structures • Tunnels • Underground ... Drainage & Irrigation Channels • Potable Water Reserves • Seals Embedded Steel, PVC or HDPE Pipe Penetrations HENRY DRAINAGE COMPOSITES: A BETTER ENGINEERED SOLUTION FOR MANAGING THE FLOW OF WATER ... highway drainage systems.

  System, Underground, Drainage, Drainage systems

Silicone Rubber -Performance Test Results-

Hardness Durometer A 50 54 52 53 54 58 45 40 51 Tensile strength MPa 6.6 7.7 9.3 7.7 11.0 9.2 2.5 7.4 8.8 Elongation at break % 310 450 730 520 780 680 320 680 400 kN/m 6 15 38 19 31 35 8 26 22 3 Compression set 180°C x 22 h 8 20 13 22 9 10 …

  Rubber, Hardness

PC2000-8 BACKHOE

Enlarged track rollers, in combination with the largest size track links, provide excellent durability. Sturdy Guard and Large Track Link Heat resistant H-NBR seal and pack-ing are employed for the hydraulic equipment and power train com-ponents. The heat resistant rubber employed for the hydraulic hose has extended its life 1.5 - 2 times.

  Rubber, Roller, Backhoe, Pc2000, Pc2000 8 backhoe

Since 1956, Clark Seals, Ltd. to protect all types and ...

Since 1956, Clark Seals, Ltd.® has designed and manufactured Sheave® and Excluder Seals® to protect all types and sizes of roller bearings. Clark is the industry leader in seals for tapered roller bearings. We continue to meet the design challenges of our customers.