Commercial and General Aviation Coatings Guide

PPG Aerospace, PRC-DeSoto is qualified to more Commercial and General Aviation specifications than any other supplier. With more than a thousand types of coatings, we offer the industry’s

  Commercial

Desothane® HS CA8800 Polyurethane Topcoats

50 - 100 minutes 90 hours 7 -10 hours 25 40 40 60 65 hours CA8800CT2 4 - 5 hours 15 - 30 minutes 35 - 45 minutes 40 hours CA8800CT3 3 - 4 hours 10 - 15 minutes 30 - 40 minutes 24 hours 2 -3 hours 5 10 15 20 12 hours CA8800CT5 1 – 2 hours 3 – 5 minutes 10 – 15 minutes 8 hours 25°C (77°F)

Technical Data Sheet - PPG AEROSPACE

thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. The following tests are in accordance with AMS-S-8802 Class B specification test methods. Application properties (typical) Color part A black part B off white

  Extrusion, Adhesion

TECHNICAL DATA - PPG AEROSPACE

extrusion gun or spatula. Unlike standard polysulfide fuel tank sealants, it can cure at low temperatures and is unaffected by changes in relative humidity. This sealant has excellent adhesion to common aircraft substrates when correctly primed with PR-1826AP Adhesion Promoter. The following tests are in accordance with AMS 3277

  Extrusion, Adhesion

TECHNICAL DATA SHEET

Epoxy Primer Health Precautions This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. An SDS is available on request ...

  Handling, Epoxy

TECHNICAL DATA SHEET - PPG AEROSPACE

Stir the topcoat slowly during the application. The suggested film thickness is 50 to 100 microns (2.0 to 4.0 mils). For gloss and semi-gloss topcoats this can be accomplished by two or three medium coats with a 50% overlap. With the flat and gunship/matte coatings it may be

  Sheet, Data, Technical, Technical data sheet, Topcoat

Commercial and General Aviation Coatings Guide

Dassault/Falcon France 5 DHMS C4.01 Canada 2 DHMS C4.04 Canada 7, 8, 18 DHMS C4.06 Canada 15 DHMS C4.18 Canada 2 DMS 1786 USA 1 DMS 1850 USA 15 DMS 2104 USA 2 DMS 2143 USA 7 DMS 2144 USA 2 DMS 2433 USA 12 DPM 4838 USA 1 DPM 5391 USA 11 DPM 5893 USA 14 DPM 6456 USA 7, 18 DPM 6546 USA 7, 18 DPM 6568 USA 4 DPM 8226 USA 19

  Falcon, Dassault, Dassault falcon

Global Military Coatings Guide - PPG AEROSPACE

supply of coatings products for the military aerospace segment of the industry. PPG has a full line of topcoats and primers needed for the industry supporting fighters, trainers, transport aircraft, and helicopters. Our Advanced Performance Coatings have become the industry standard supporting nearly all platforms in the industry.

  Advanced, Coating

MIL-PRF-85285 TYPE I CLASS H - ppgaerospace.com

PRODUCT INFORMATION DATA SHEET 17451 Von Karman Avenue, Irvine, CA 92614 Tel (949) 474-0400 (800) 544-3338 . Fax (949) 474-7269 . www.deftfinishes.com

TECHNICAL DATA SHEET

513 X 419 Page 1 DeSoto® 513X419 Military Epoxy Polyamide Primer TECHNICAL DATA SHEET Product Description DeSoto® 513X419 military epoxy primer is a high solids, chemical and solvent resistant coating. It is used over aluminum and composite surfaces prior to top coating. Compatible with Desothane® HS topcoats Excellent adhesion and corrosion resistance

TECHNICAL BULLETIN ALODINE 1200S - Telford Industries

Alodine 1200S Page 6 7. HANDLING PRECAUTIONS Alodine 1200S powder and baths are acidic, and poisonous. Fume or spray vapour from an Alodine bath is toxic.Alodine baths should be situated in a positively ventilated areas. If rags, paper or clothing contaminated with Alodine dry …

  Technical, Bulletin, Alodine, Technical bulletin alodine 1200s, 1200s

BONDERITE M-CR 1201 - eis-inc.com

Technical Process Bulletin BONDERITE M-CR 1201 AERO/ CHROMATE COATING (KNOWN AS ALODINE 1201) 3 of 4 Selecting the size of the area to be treated at one time depends on the method of application, condition of the metal

  Alodine

Alodine Henkel – Touch-N-Prep Coating Your worldwide …

1. 2. 6. 7. 5. 4. Pen Instructions Touch-N-Prep® pens are designed for easy and safe repair of clean, bare, or previously painted aluminum surfaces. It is a non-rinse, dry-in-place application that can be applied using the following steps: Before applying the coating, the treated surface

  Touch, Alodine, Prep, Coating, Touch n prep coating

· CAPABILITIES · MIL-C-5541E SPECIFICATIONS · MIL-DTL ...

Chromate Classes • Class 1- Yellow to Brown, Maximum corrosion resistance generally used as final finish • Class 2- Colorless to yellow, Moderate corrosion resistance, used as a …

FINISH SPECIFICATIONS CROSS REFERENCE

Marion, TX 78124 Common Name Other Common Name MIL-OR-QQ- AMS ASTM MIL-STD-171 FINISH No. MIL-F-14072 FINISH No. Anodize Sulfuric Non-dyed Clear Sulfuric Acid

  Cross, Specification, Reference, Finish, Finish specifications cross reference

1-Way Bracket Assemblies - Interprovincial

Page T1-1 320 W. 18th St., Edmond OK 73013 • 405-340-3434 • FAX: 405-340-3435 • E-mail: pelco@pelcoinc.com • www.pelcoinc.com 7 4 8 1 5 8 2 7

  Assemblies

QUALIFICATIONS CERTIFIED QPL-81706-16 SEPTEMBER 2001 ...

qpl-81706-16 6 government designation manufacturer’s designation test or qualification reference manufacturer’s name and address henkel surface technologies

ARINC 600 Series - Mouser Electronics

Overview ARINC 600 Series Benefits ..... Applications .....

  Electronic, Arinc, Mouser, Mouser electronics