Hardie
Found 7 free book(s)
Florida Product Approval HardiePlank Lap Siding
www.floridabuilding.orgHardie® Siding Products” at www.JamesHardie.com. • DO NOT use stain on James Hardie® products. WARNING: AVOID BREATHING SILICA DUST James Hardie ® products contain respirable crystalline silica, which is known to the State of California to cause cancer and is considered by IARC and NIOSH to be a cause of cancer from some occupational ...
Design Manual - James Hardie
www.jameshardie.co.nzFigure 1: Vertical junction between Linea™ Weatherboard and James Hardie flat sheet cladding Figure 2: Vertical junction between Linea™ Weatherboard and James Hardie flat sheet cladding 4 James Hardie Cladding Junction Details Design Manual November 2016 New Zealand Flexible underlay Linea™ Weatherboard Scriber 60 x 3.15mm jolt head
SCOPE - James Hardie
www.jameshardie.comHardie Building Products Inc. makes no warranty or representation with respect to use of the information contained herein for any use other than with James Hardie® products, including but not limited to use with fi ber cement siding products made by others or siding products made of other materials.
Linea Weatherboard Installation Guide
static-content-prod.jameshardie-digital.com.auJames Hardie™ external cladding and roofs, decks, paths, steps and driveways. Adjacent finished grade must slope away from the building in accordance with local building codes, typically a minimum slope of 50mm minimum over the first metre. Do not install external cladding such
HardieTrim Boards Products Description - James Hardie Pros
www.jameshardiepros.com32 HardieTrim® Boards Products Description HardieTrim® boards come finished with either the PrimePlus® factory primer and sealer or with ColorPlus® Technology. The ColorPlus® coating is a factory-applied, oven-baked finish available on a variety of James Hardie® siding and trim products. See your local dealer for details and availability of products, colors, and accessories.
HardieTrim Boards - Installation Instructions
www.buildsite.comJames Hardie recommends the use of quality, hot-dipped galvanized nails. James Hardie is not responsible for the corrosion resistance of fasteners. Stainless steel fasteners are recommended when installing James Hardie products near the ocean, …
HardiePanel Vertical Siding - James Hardie Pros
www.jameshardiepros.comHardie technical sales representative for assistance. James Hardie makes no representation or warranty that adopting a particular cutting practice will assure your compliance with OSHA rules or other applicable laws and safety requirements. 1 Water-resistive Barrier and drainage requirements as defined by building code.