Search results with tag "James hardie"
30-Year Limited Warranty - James Hardie
www.jameshardie.com1-800-9-HARDIE 10901 Elm Avenue Fontana, CA 92337 30-Year Limited Warranty HardiePlank® HZ5® Lap Siding, HardiePanel® HZ5® Vertical Siding, HardieShingle® HZ5® Siding, HardieSoffit® HZ5® Panels 1. LIMITED WARRANTY. James Hardie Building Products
Design Manual - James Hardie
www.jameshardie.co.nzFigure 1: Vertical junction between Linea™ Weatherboard and James Hardie flat sheet cladding Figure 2: Vertical junction between Linea™ Weatherboard and James Hardie flat sheet cladding 4 James Hardie Cladding Junction Details Design Manual November 2016 New Zealand Flexible underlay Linea™ Weatherboard Scriber 60 x 3.15mm jolt head
2. Hazard Identification - James Hardie
www.jameshardie.com.auJames Hardie Joint Sealant Safety Data Sheet Issue 1 November 2016 Page 3 of 7 November 2016 Product name: James Hardie Joint Sealant 6.
Installation Guide
static-content-prod.jameshardie-digital.com.auAustralia May 2019 Make sure your information is up to date. When specifying or installing James Hardie products, ensure that you have the current technical information and guides. If in doubt, or you need more information, visit www.jameshardie.com.au or Ask James Hardie on 13 11 …
The ultimate finishing accessory for slab ... - James …
www.jameshardie.com.auHardieEdge™ Trim HARDIEEDGE™ COMPONENTS COMPONENTS SUPPLIED BY JAMES HARDIE PRODUCT DESCRIPTION HardieEdge™ Base Trim Powder Coated. 3950mm long. A powder coated aluminium extrusion used at
NO CAULK - James Hardie
www.jameshardie.comcoated coil stock and code compliant water-resistive barriers, such as HardieWrap® weather barrier. Other products may also be suitable. James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank ® siding with ColorPlus® technology.
Finishing James Hardie TECHNICAL BULLETIN Siding …
www.jameshardie.comroduct-onl warrant and lead to ersonal injury. DESIN ADICE: An information or assistance rovided b James Hardie ... Please contact the paint manufacturers for their current recommendations, specifications and warranty information. James …
SCOPE - James Hardie
www.jameshardie.comHardie Building Products Inc. makes no warranty or representation with respect to use of the information contained herein for any use other than with James Hardie® products, including but not limited to use with fi ber cement siding products made by others or siding products made of other materials.
External cladding Internal lining - James Hardie
www.jameshardie.com.au1 INTRODUCTION 1.1 APPLICATION This manual provides information for designers of James Hardie fire and acoustically rated walls, framed from timber or …
Design Manual - jameshardie.co.nz
www.jameshardie.co.nzFire and Acoustic Design Manual August 2017 New Zealand 3 1 Introduction readers are familiar with the relevant James Hardie cladding and lining product literature.
Technical specification - James Hardie
www.jameshardie.com.auconstruction of fire and acoustically rated walls technical specification july 2015 3 1.2 overview of typical james hardie separating wall system
Technical Supplement - James Hardie
www.jameshardie.com.auINTERIORS Internal Fire and Acoustic Rated Floor Solution Technical Supplement Australia June 2017 Make sure your information is up to date. When specifying or installing James Hardie™ products, ensure you have the current manual.
TECHNICAL DATA SHEET Artisan Lap Siding - James Hardie …
www.aspyredesign.comTECHNICAL DATA SHEET General Description Artisan Lap Siding is a noncombustible fiber-cement siding, manufactured by James Hardie Building Products.
HARDIPLANK Installation Instructions
www.structuretech1.comJames Hardie’s seal of approval indicates products recommended for use by James Hardie Building Products Circular saw with dust collector Circular saw blade with carbide-tipped teeth FRAMING REQUIREMENTS: Hardiplank lap siding can be installed over braced wood or steel studs spaced a maximum of 24” o.c. or directly to minimum 7/16” thick ...
TR1509 HardieTrim HZ Installation ... - James Hardie …
www.jameshardiepros.comjoist 1 in. min. water resistive siding barrier flashing deck material ledger trim flashing FLASHING/CLEARANCE REQUIREMENTS NO-COVER vertical trim 1/4 in. min.
Application guide - James Hardie
www.jameshardie.com.auSTRUCTURAL BRACING DESIGN MANUAL JANUARY 20125 2.3.3 Structural Bracing Apart from using HardieBrace sheet bracing as structural bracing as per Clauses 2.3.6 and 2.3.7 below, Type A and B units can also be achieved
Fastening Tips for HardiePlank Lap Siding TECHNICAL ...
www.jameshardie.comwater-resistive barrier Finish nail Blind nail 3/4 in.-1 in. 24in. O.C. max. stud 11/4 in. min. overlap. IMPORTANT: Failure to install and fi nish this product in accordance with applicable building codes and James Hardie written application instructions
External cladding - James Hardie
www.jameshardie.com.auEXTERNAL CLADDING TECHNICAL SPECIFICATION MARCH 2016 3 The Heritage profile is a double width board that allows faster wall coverage. The Heritage and Chamfer profiles have rebated edges that
Cut time. Not Quality. - James Hardie
www.jameshardie.comTo further limit respirable silica dust exposures, wear a properly-fitted NIOSH approved dust mask or respirator (e.g. N-95 dust mask) in accordance with applicable government regulations and manufacturer instructions. • NEVER dry sweep – Use wet dust suppression methods, sweeping compound, or
PREVAIL
www.prevailsiding.comPREVAIL ® Architectural Specification Section 07460/HAR NOTE TO SPECIFIER: This is a proprietary specification of James Hardie Building Products
External cladding - James Hardie Industries
www.jameshardie.com.auEXTERNAL CLADDING TECHNICAL SPECIFICATION MAy 2014 3 The Heritage profile is a double width board that allows faster wall coverage. The Heritage and Chamfer profiles have rebated edges that
Prevail Multifamily Siding Products Date of Issue: …
www.prevailsiding.comPrevail Multifamily Siding Products 26300 La Alameda, Suite 400 Mission Viejo, CA 92691 Date of Issue: 06/01/2015 Issue 1 4 of 9 James Hardie® recommended best practices for handling fiber-
Achieve authentic character and …
www.fp-supply.comOnly James Hardie fiber cement products are Engineered for Climate®.In the northern U.S. and Canada, HZ5® products resist shrinking, swelling and …
Lap Siding - J&L Building Materials Inc.
www.jlbuilding.comPNEUMATIC FASTENING GENERAL FASTENING REQUIREMENTS HS11117-P3/4 1/13 James Hardie products can be hand nailed or fastened with a pneumatic tool.
Evaluation Report ESR 2290 - James Hardie Pros
www.jameshardiepros.comICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed
Current List of All Non-U.S. Issuers 494 NYSE and NYSE ...
www.nyse.comJames Hardie Industries N.V. JHX $ 14,524 NYSE Construction & Materials 10/22/01 A Westpac Banking Corporation WBK $ 73,895 NYSE Banks 3/17/89 A IPO
James Hardie Australia Fibre cement board August 2016 ver 2
www.jameshardie.com.auJames Hardie Fibre Cement Products Safety Data Sheet Issue 1 August 2016 Page 2 of 7 August 2016 Product name: James Hardie Fibre Cement Products
HardiePlank Lap Siding Product Description - James Hardie …
www.jameshardiepros.comGeneral Product Information Tools for utting and Fastening General Installation Reuirements General Fastener Reuirements Finishing and aintenance
Similar queries
30-Year Limited Warranty, James Hardie, 2. Hazard Identification, Australia, James, Resistive barriers, Roduct, Specifications, Hardie, Technical specification, Technical Supplement, INTERIORS, TECHNICAL DATA SHEET, Siding, Vertical, Application guide, DESIGN MANUAL, Water-resistive, External cladding, Respirable silica, PREVAIL, EXTERNAL CLADDING TECHNICAL SPECIFICATION, Prevail Multifamily Siding Products, Achieve authentic character and, Lap Siding, Lap Siding Product Description