Section e electrical component nomenclature and data
Found 5 free book(s)
SECTION D COMPRESSOR NOMENCLATURE - HVACRinfo
www.hvacrinfo.comE J M V Z 5 (Refer to model data or nameplate for specifi c nominal voltage.) Product Variations Numbers will be assigned as follows: 1. Number – 100 is standard compressor used in Copeland brand Condensing units. 2. Number – 200 indicates a STANDARD Com-pressor and Component Parts B/M and Model No. 3. Number – 700 and –900 series ...
XLamp XT-E LEDs - Cree LED Components
cree-led.comThe following tables provide order codes for Standard XLamp XT-E White LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 39). For definitions of the chromaticity kits, please see the Standard Chromaticity Kits section (page 39). Chromaticity Minimum Luminous Flux (lm) @ 350 mA
Installation Operation Maintenance - Trane
www.trane.comdata to insure the proper unit was shipped. Available power supply must be compatible with electrical characteristics specified on component nameplates. Replace damaged parts with authorized parts only. Inspection Checklist To protect against loss due to damage incurred in transit, complete the following checklist upon receipt of the unit.
DBC Commercial - Daikin Comfort
backend.daikincomfort.comElectrical Units are completely wired and tested at the factory to provide faster commissioning and start-up. » Wiring complies with NEC requirements and all applicable UL standards. » For ease of use, wiring and electrical components are number coded and labeled according to the electrical diagram.
Installation Operation Maintenance
www.climas-trane.com.mxDigit 8 - Electrical Characteristics 3 = 208-230/60/3 4 = 460/60/3 D = 400/50/3 T = 380/60/3 W = 575/60/3 Packaged Cooling with Electric Heat Unit Typical Model Nomenclature Digits 1, 2 - Product Type TC = Packaged Cooling, Electric Heat TF = With Factory Installed Options Digits 4, 5, 6 - Nominal Gross Cooling Capacity (MBh)