Bitumastic 300M - Carboline
CLEANUP & SAFETY Cleanup For equipment flushing and cleaning, use Thinner # 76 or Thinner # 2. Use Thinner # 85 in case of spillage, absorb and dispose of in accordance with local applicable regulations. Safety Read and follow all caution statements on this product data sheet and on the material safety data sheets for this product.
Download Bitumastic 300M - Carboline
Information
Domain:
Source:
Link to this page:
Documents from same domain
Carbomastic 15 - Carboline
msds.carboline.comGeneric Type Epoxy Mastic Description Aluminium-pigmented, low-stress, high solids mastic with a proven field history. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or
Carbozinc 859 - Carboline
msds.carboline.comGeneric Type Organic Zinc Rich Epoxy Description Low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 has less than 360g/litre VOC (thinned) and is used extensively in virtually all industrial markets. Features
Carbozinc 11 HS - Carboline
msds.carboline.comThese are nominal values. When used as a pre-construction primer thin up to 38 oz/gal using exempt Thinner 236 E. Topcoats Acrylics, Epoxies, Polyurethanes, High Heat Silicones, Silicates and others as recommended by your Carboline sales representative. Not required for certain exposures. A mist-coat/full-coat spray technique is often required to
Carboguard 893 - Carboline
msds.carboline.comBrush Use a medium bristle brush. Roller Use a short-nap synthetic roller cover with phenolic core. APPLICATION CONDITIONS Condition Material Surface Ambient Humidity Minimum 4°C (40°F) 4°C (40°F) 4°C (40°F) 0% Maximum 32°C (90°F) 57°C (135°F) 43°C (110°F) 90% This product simply requires the substrate temperature to be above the ...
Carbothane 134 HG - Carboline
msds.carboline.com24°C (75°F) 8 Hours 8 Hours 7 Days 32°C (90°F) 4 Hours 4 Hours 5 Days These times are based on a 50 micron dry film thickness. Higher film thickness, insufficient ventilation or cooler temperatures will require longer cure times and could result in solvent entrapment and premature failure. *Maximum self-recoat times are indefinite.
Carbothane 134 - Carboline
msds.carboline.comNOTE: Substitute thinners, especially Lacquer Thinners, may contain alcohols which will inhibit the cure of Carbothane 134. Use of thinners other than those supplied or approved by StonCor Africa may adversely affect product performance and void product warranty, whether express or implied. Ratio 8:1 Pot Life
Thermaline 450 EP - Carboline
msds.carboline.comSurface profile should be a dense angular 1-3 mils and is best achieved through abrasive blasting. Remove all contaminants that would interfere with the performance of stainless steel for the intended service such as, but not limited to, imbedded iron or chlorides.
Carboguard 890 - Carboline
msds.carboline.comJanuary 2019 890 Page 2 of 4 SUBSTRATES & SURFACE PREPARATION General Surface must be clean and dry. Remove all dirt, dust, oil and all other contaminants. Steel Immersion: ISO 8501 Sa2½ Non-immersion: ISO 8501 Sa2½ 40 to 75µm ISO 8501 St2 or St3 are suitable cleaning methods for mild environments. Galvanized Steel
SELECTION & SPECIFICATION DATA - Carboline
msds.carboline.comto these guidelines to achieve the desired results. Spray Application (General) The following spray equipment has been found suitable and is available from equipment manufacturers. Keep material under mild agitation during application. If spraying stops for more than 10 minutes, recirculate the material remaining in the spray line.
Carboguard 635 - Carboline
msds.carboline.comPotable Water Use: (0200) Beige, (0700) Grey and (0800) White Other Colours: Red and Black Gloss Satin Primer Self-priming Recommended Thickness 100 to 150 microns per coat Solid(s) Content By Volume: 65% ± 2% Theoretical Coverage Rates 25.6m²/litre at 25 microns 6.4m²/litre at 100 microns 4.3m²/litre at 150 microns Allow for loss in mixing ...
Related documents
TECHNICAL DATA SHEET - Henry
henry.comlaminated to a blue engineered thermoplastic film surface. It is specifically designed to be self-adhered to a prepared substrate ... Compatible with Henry® Air-Bloc fluid applied air barriers ... Refer to the Safety Data Sheet prior to using this product. The Safety Data Sheet is available at www.henry.com or by emailing
Interfine 629 - AkzoNobel
international.brand.akzonobel.comOct 12, 2015 · This product is intended for use only by professional applicators in industrial situations in accordance with the advice given on this sheet, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS) which International Protective Coatings has provided to its customers.
Epoxy - AkzoNobel
international.brand.akzonobel.comMar 14, 2017 · This product is intended for use only by professional applicators in industrial situations in accordance with the advice given on this sheet, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS) which International Protective Coatings has provided to its customers.
Intergard 269 - AkzoNobel
marinecoatings.brand.akzonobel.comMar 11, 2016 · Total output fluid pressure at spray tip not less than 141 kg/cm² (2010 p.s.i.) ... consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. If you do not fully understand these warnings and ...
Interlac 665 - AkzoNobel
marinecoatings.brand.akzonobel.comNov 13, 2015 · relevant national Health, Safety & Environmental standards and regulations. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels.
DATA SHEET - Ansul
www.ansul.comSafety Data Sheets (SDS) are available at www.ansul.com Note: The converted values in this document are provided for dimensional reference only and do not reflect an actual measurement. ANSUL, ANSULITE, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited.
TREMproof® 250GC - Tremco Sealants
www.tremcosealants.com•Applied product should not be left uncovered to UV exposure longer than 120 days or covered with a protection course longer than 120 days. • Where asphaltic membranes, self-adhering flashing or self-adhering sheet membranes, come in contact with TREMproof 250GC, Tremco Epoxy Primer is to be used at the overlap condition. Warranty