CONCRETE FLOORING - Bison Precast

STAIRS AND LANDINGS - Bison Precast

10 11 precast stairs and landings for extensive technical details please visit our website: www.bison.co.uk section 02 for further help and information please call our technical help line: 01283 495334

  Stair, Landing, Stairs and landings

HOLLOW CORE FLOORS - Bison Precast

commercial / industrial products for more information please visit our website: www.bison.co.uk hollow core floors unit profiles 1200mm nominal width

  Core, Hollow, Hollow core

BISON PRECAST STAIRS SPECIFICATION D

3 Separate reinforced landings are also available. These also are to be used in conjunction with a screed again to allow for manufacturing tolerances and to cover up the support

Hollowcore Floors - Bison Precast

Hollowcore Floors Load/Span Table Largely because of fast on-site construction, Bison Hollowcore Floors are one of the most economic flooring solutions

  Floor, Hollowcore, Hollowcore floors

Flooring Specification - Bison Precast

FLOORING SPECIFICATION 1. SCOPE OF SPECIFICATION 1.1 Floor Types: This specification covers the design, manufacture and associated site …

  Specification, Flooring, Flooring specification

Approved by: DA 04/04/2014 Hollow core design

Issued by: CF 12/08/13 Approved by: DA 04/04/2014 Reference: CTS-01 Page Engineering: Concrete 1 of 1 Introduction: This data sheet relates to the concrete topping that is applied to

  Design, Core, Hollow, Approved, Approved by, Da 04 04, Hollow core design

Beam & Block Floors - Bison Precast

Bison Precast Tetron Point William Nadin Way Swadlincote Derbyshire DE11 0BB 01283 817 500 concrete@bison.co.uk bison.co.uk For the complete Bison Precast brochure range, visit bison.co.uk 05/2019 Forterra is a leading manufacturer of a diverse range of clay and concrete building products, used extensively within the construction sector,

  Precast

Hollowcore Floors - Bison Precast

the outer core can be filled solid to further enhance the load transfer capacity of the slab. Bearing on masonry Typically slabs are manufactured to have 100mm bearing onto a 100mm wide wall. However, a common detail is for the slabs to share an intermediate wall. In this situation the minimum thickness of the wall required is 190mm.

  Core, Floor, Slab, Hollowcore, Hollowcore floors

Flooring Specification - Bison Precast

FLOORING SPECIFICATION 1. SCOPE OF SPECIFICATION 1.1 Floor Types: This specification covers the design, manufacture and associated site …

  Specification, Flooring, Bison, Flooring specification