GENERAL DESCRIPTION TINTING AND BASE …

HEAVY DUTY - buyat.ppg.com

heavy duty construction adhesive warning! causes eye, skin and respiratory tract irritation. may be harmful if swallowed. potential cancer hazard.

  Heavy, Duty, Heavy duty

GENERAL DESCRIPTION PRODUCT DATA (continued)

Architectural Coatings Pitt-GlazeWB1 Interior Semi-Gloss Pre-Catalyzed Water-Borne Acrylic Epoxy GENERAL DESCRIPTION PRODUCT DATA (continued) 9-100 Series RECOMMENDED USES

  General, Product, Data, Descriptions, Continued, General description product data

Price Schedule 118-015 - PPG Industries

Price Schedule 118-015 PPG Architectural Finishes, Inc., One PPG Place, Pittsburgh, PA 15272 Visit our Virtual Paint Store on the web at www.ppgaf.com Effective 01 February 2008 Rev. 02/07 PL021/69

  Schedule, Recip, Paint, Price schedule 118 015

INTERIOR LATEX PAINT FOR WALLS AND CEILINGS - PPG

TECHNICAL DATA SHEET SICO EXPERT 871-6XX INTERIOR LATEX PAINT FOR WALLS AND CEILINGS Water-based product, flat finish Before use, be sure to read and follow the instructions and warnings on the label and Safety Data Sheet.

  Walls, Interior, Paint, Latex, Interior latex paint for walls

16-551 Pitt-Glaze WB - PPG Industries

PITT-GLAZE® WB 16-551 Series PITT-GLAZE® WB Water-Borne Acrylic Epoxy HPC/Industrial Maintenance GENERAL SURFACE PREPARATION Surface to be painted must be clean, dry, smooth, and free from dirt, grease, powdery or peeling paint, and other surface conta minants.

  Pitt, Glaze, Pitt glaze wb, Pitt glaze

TIMELESS PPG73-110 Series - buyat.ppg.com

TIMELESS PPG73-110 Series PPG TimelessExterior Flat Paint + Primer GENERAL SURFACE PREPARATION Surface must be clean and dry. Remove all loose, peeling paint, dirt, mildew, grease, oil, chalk, rust, and any other surface contaminants.

  Ppg73 110, Ppg73

GENERAL DESCRIPTION PRODUCT DATA (continued)

Architectural Coatings Pitt-GlazeWB1 Interior Semi-Gloss Pre-Catalyzed Water-Borne Acrylic Epoxy GENERAL DESCRIPTION PRODUCT DATA (continued) 9-100 Series RECOMMENDED USES FEATURES / BENEFITS Pitt-Glaze WB1 Water-Borne Acrylic Epoxy is a one-component acrylic epoxy semi-gloss coating for interior use and is a low-odor

  General, Product, Data, Descriptions, Continued, General description product data

Transparent Satin Cetol Log & Siding Wood Finish

DESCRIPTION SPECIFICATION DATA FEATURES • High-solids alkyd-oil formula, two-coat application • High-transparency transoxide pigments amplify depth of color,

  Data

Pitt-Tech Plus 90-912 Series - PPG Industries

Pitt-Tech®Plus 90-912 Series Pitt-Tech®Plus Int./Ext. DTM Industrial Primer HPC/Industrial Maintenance GENERAL SURFACE PREPARATION The surface to be coated must be dimensionally stable, dry, clean, and free of oil, grease, release agents, curing compounds, and other

  Series, Industreis, Tech, Plus, Pitt, Pitt tech plus 90 912 series ppg industries, Plus 90 912 series pitt

PERMA-CRETE 4-110XIC Series - Paints, Coatings and Materials

PPG PAINTS 4-110XIC Series PPG Architectural Coatings PITT-FLEX Elastomeric Coating — Smooth RECOMMENDED PRIMERS APPLICATION INFORMATION PRECAUTIONS Brick, concrete, masonry and stucco: Self-priming, Perma-Crete 4-809C, SealGrip 17-921C, Dulux Gripper 60000 Concrete blocks: Self-priming, Perma-Crete 4-100XIC, SealGrip 17-921C, Dulux Gripper 60000 Fibre Cement …

  Concrete, Perma, Coating, Dulux, Crete, Perma crete

ELW Designer's Hazard Checklist Elimination Schedule Rev 1

Edge Lane West Highway and Environmental Improvement Scheme Pre-Construction Information Pack Edge Lane West Highways and Environmental Improvement Scheme

Design and Construction Considerations for Deep Basement

SSP Geotechnics Sdn Bhd Design and Construction Considerations for Deep Excavation By: S.S. Gue & Y.C. Tan September, 1998 Page 5 (b) The criterion for limiting deformation was the ‘angular distortion’ or relative rotation as shown in

  Design, Construction, Deep, Considerations, Design and construction considerations for deep

SECTION XXXXXX –TECHNICAL SPECIFICATIONS FOR …

section xxxxxx –technical specifications for installation of protective coatings for manholes, wetwells, and other sanitary sewer structures

  Installation, Specification, Technical, Structure, Xxxxxx, Xxxxxx technical specifications for installation, Xxxxxx technical specifications for

FS-ONE High Performance Intumescent Firestop Sealant

SavingLives through innovation & education • Hilti Firestop Guide 2001 Hilti U.S.: 1-800-879-8000 / www.us.hilti.com 13 Installation Instructions FS-ONE High Performance Intumescent Firestop Sealant Product description • Intumescent (expands when exposed to fire) firestop sealant that

  Performance, High, Sealant, Firestop, Intumescent, One high performance intumescent firestop sealant

Review of Design Codes for Masonry Buildings - IIT Kanpur

Review of Design Codes for Masonry Buildings IITK-GSDMA-EQ10-V1.0 3 2.3 New Zealand Standard – Code of Practice for the Design of Concrete Masonry Structures (NZS 4230: Part 1:1990)

  Code, Design, Building, Structure, Concrete, Masonry, Design codes for masonry buildings, Concrete masonry structures

FOR RUBBING, SMOOTHING, RESTORATION, …

SURFACE PREPARATION All surfaces must be clean and structurally sound; free of dust, grease, oil, paint, sealers, cures, form release agents, etc. Pores of the concrete surface must be open

  Concrete, Restoration, Smoothing, Rubbing, For rubbing

SUBCHAPTER 11 [1105.3] 685 Foundation Piers …

Title 27 / Subchapter 11. 251. between the underside of the cap and the ground, the requirement for embedment of the cap below the level of frost penetration, shall not apply.

  Foundations, Pire, 685 foundation piers

Construction Industry Digest - Home | Occupational Safety ...

CONSTRUCTION INDUSTRY DIGEST 7 Foreword The Construction Industry Digest contains summaries of the most frequently used standards in the construction industry.

  Construction, Industry, Digest, Construction industry digest