I2C bus specifications - CERN
I2C bus specifications for the CMS tracker 2S & PS modules V 2.0 21/4/2016 2 Revision History Version Date Comments V1.0 22/11/2015 First draft V2.0 21/4/2016 Device ID extended to 3 bytes. Table 2 revised to reflect the non-programmable CiC address field. Added electrical and timing specifications. ...
Download I2C bus specifications - CERN
Information
Domain:
Source:
Link to this page:
Related documents
Interfacing FT2232H Hi-Speed Devices to I2C Bus
www.ftdichip.comThe physical layer of I2C bus is a simple handshaking protocol that relies upon open collector outputs on the bus devices and the device driving or releasing the bus lines, so a pull-up resistor is needed on each wire of the bus. I2C bus is a true multi-master bus including collision detection and arbitration to prevent data corruption
Lidar Lite v3 Operation Manual 2 and Technical …
static.garmin.comI2C Interface This device has a 2-wire, I2C-compatible serial interface (refer to I2C-Bus Specification, Version 2.1, January 2000, available from Philips Semiconductor). It can be connected to an I2C bus as a slave device, under the control of an I2C master device. It supports 400 kHz Fast Mode data transfer.
24AA64/24LC64 64K I2C Serial EEPROM
ww1.microchip.comThe 24XX64 supports a bi-directional 2-wire bus and data transmission protocol. A device that sends data onto the bus is defined as transmitter, and a device receiving data as receiver. The bus has to be controlled by a master device which generates the serial clock (SCL), controls the bus access and generates the
THE I2C-BUS SPECIFICATION VERSION 2.1 JANUARY 2000
www.csd.uoc.gr6 Philips Semiconductors The I2C-bus specification 2.2 Manufacturer benefits I2C-bus compatible ICs don’t only assist designers, they also give a wide range of benefits to equipment manufacturers because: •The simple 2-wire serial I2C-bus minimizes interconnections so ICs have fewer pins and there are
I2C Serial Interface 20x4 LCD Module - HandsOn Tec
www.handsontec.com8 bit I/O port expander that uses the I2C protocol. The PCF8574 is a silicon CMOS circuit provides general purpose remote I/O expansion (an 8-bit quasi-bidirectional) for most microcontroller families via the two-line bidirectional bus (I2C-bus). Note that most piggy-back modules are centered around PCF8574T (SO16 package of PCF8574 in DIP16
AN262 PCA954X Family of I²C Multiplexers
www.nxp.comICs can be compliant with USB 2.0 specifications yet only be capable of the older ‘full speed’ or 12 Mbits/sec. DesignCon 2003 TecForum I2C Bus Overview 10 Bus characteristics compared Bus Data rate (b i t s / se c) Length (meters) Length lim iting f actor Nodes Typ.number Node number limiting factor I2C 400k 2 w ir ng capac tance 20 400pF max
UM10204 I2C-bus specification and user manual
www.pololu.comKeywords I2C, I2C-bus, Standard-mode, Fast-mode, Fast-mode Plus, Fm+, ... Detailed sections cover the timing and electrical specifications for the I2C-bus in each of its operating modes. Designers of I2C-compatible chips should use this document as a reference and ensure
PCF8574 Remote 8-Bit I/O Expander for I2C Bus datasheet ...
www.ti.combidirectional bus (I2C) is designed for 2.5-V to 6-V VCC operation. The PCF8574 device provides general-purpose remote I/O expansion for most microcontroller families by way of the I2C interface [serial clock (SCL), serial data (SDA)]. The device features an 8-bit quasi-bidirectional I/O port (P0–P7), including latched outputs with high-