SOLID STATE AREA LIGHTING SIGMA SERIES-PLED

RNTS 4 ROUND - US Pole Company Inc.

specifications 4" round straight steel 4" diameter, fabricated from high grade structural steel tube. shaft conforms to astm-a-501-68 specifications.

PROJECT TYPE: RAZAR SERIES-LED

RAZAR SERIES-LED 525mA 700mA 1050mA 24 40 48 80 120 Approximate Average Lumens – 4000K (Lumens median of all distributions) Watts Lumens 41 66 81 131 195

  Series, Razar, Razar series led

PROJECT TYPE: RAZAR SERIES-LED

Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F /-40°C. Driver(s) is/are UL and cUL recognized and mounted directly against the Electrical Housing to facilitate thermal transfer, held down by universal clamps to facilitate easy removal. In-line terminal blocks facilitate

  Power, Block, Recognized

SQUARE STRAIGHT STEEL POLE PROJECT NAME: SNTS 4

exceeds minimum yield strength of 36,000 P.S.I. base telescopes and is circumferentially welded to pole shaft. Slotted bolt holes provide 1" flexibility on either side of bolt circle centerline. Anchorage (4) anchor bolts fabricated from hot rolled steel bar. Minimum yield strength of 50,000 P.S.I. bolts have "L" bend on one end and

  Strength, Anchorage

PROJECT NAME: SOLID STATE AREA LIGHTING FIXTURE TYPE ...

have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments. LED DRIVER(S) Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C . Driver(s) is/are UL and cUL recognized and mounted

  Constant, Current, Constant current

LCGR SERIES-L E D

LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options. LED DRIVER UL and CUL recognized Constant Current LED drivers operate on input voltages from 120-277VAC, 50/60hz. Consult Factory for (347-480VAC). Driver is mechanically fastened to

  Constant, Drivers, Current, L e d, Led driver, Constant current led

TABLE OF CONTENTS - Energy

A luminaire can have a lower LER but do a better job of dis-tributing light to an identified task. Lighting Power Density Lighting power density (LPD) is the total input power (i.e., including the driver or ballast) multiplied by the total ... it supports as well as the surrounding area of the site. A parking lot at a national

  Area, Site, Luminaire

TABLE OF CONTENTS - Energy

A luminaire can have a lower LER but do a better job of dis-tributing light to the task. Lighting Power Density (LPD) Lighting power density (LPD) is the total input power (i.e., including the driver or ballast) multiplied by the total number of luminaires divided by the area in which the equipment is installed. Many energy codes use

  Area, Luminaire

Industrial lighting Final - Bajaj Electricals

luminaire rows or columns, there will be a luminaire on the center line. With even quantities, the locations are one half of a spacing of the center line. The luminaire closer to a wall should be one half of a spacing or less. In a functional area, the luminaires should run up to the edge of the area and beyond, if possible. Outdoor Lighting Design

  Industrial, Area, Lighting, Luminaire, Industrial lighting

LED lighting solutions by Eaton

hazardous area rated The Champ® VMV is an ideal luminaire for illuminating conveyor belts and walkways. Optics allow for increased visibility and performance. Champ® VMV Champ® VMV Rail Rail Safety Grating Conveyor Belt 120” xxx VMV21L and 25L VMV13L and 17L VMV3–11L Model Number Equivalent HID Luminaire Typical Energy Savings/ Lifetime ...

  Area, Luminaire

Calculating Light Loss Factors - Energy

for area and luminaire performance data from the manufacturer – Based on “on/off” control, max/min operation temperatures, incident sunshine on luminaire and daytime heat effects. Work with manufacturer. Heat Extraction – luminaire has a thermal capacitance based on mass, specific heat of materials, and rate of dissipation. –

  Area, Energy, Luminaire

AMERICAN NATIONAL STANDARD NECA 100-2006

2.0 Luminaire (Lighting Fixtures) 2.1 Luminaire Fixtures—Basic Modifiers Mounting 2.2 Luminaire Fixtures—Basic Modifiers Orientation 2.3 Luminaire Fixtures—Basic Modifiers Emergency 2.4 Luminaire Fixtures—Extended Fixtures 3.0 Outlets and Receptacles 4.0 Switches and Sensors 5.0 Motors—Controls 5.1 Motorized & HVAC Equipment 6.0 Security

  American, Standards, National, Luminaire, American national standard

VIPER Area/Site

• Low profile LED area/site luminaire with a variety of IES distributions for lighting applications such as auto dealership, retail, commercial, and campus parking lots • Featuring two different optical technologies, Strike and Micro Strike Optics, which provide the best distribution patterns for retrofit or new construction

  Area, Site, Luminaire, Area site luminaire

Site & Area ECF-L EcoForm large

Site & Area EcoForm ECF-L large area luminaire Ordering guide Prefix ECF-L Number of LEDs Drive Current LED Color - Generation Mounting Distribution Voltage ECF-L EcoForm site and area, large 80L 80 LEDs (5 modules) 96L 96 LEDs (6 modules) 900 900 mA 1A 1050 mA 1.2A 1200 mA 800 800 mA 1A 1050 mA 1.2A 1200 mA 1.4A19 1400 mA WW-G2 Warm White ...

  Area, Site, Luminaire, Area luminaire