XM CONNECTOR XM CONNECTOR

1 XMCONNECTOR. XM CONNECTOR . mmpitch/Crimp pitch/Crimpstyle stylewire-to-wire wire-to-wireconnectors connectors Specifications Current rating: 3 A AC/DC. Voltage rating: 250 V AC/DC. Temperature range: -25 to +85 . ( including temperature rise in applying XMCONNECTOR. XM CONNECTOR electrical current). contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. Insulation resistance: 500 M min. Withstanding voltage: 1,500 VAC/minute Applicable wire: AWG #28 to #20. to mm2. Applicable panel thickness: to mm * In using the products, refer to "Handling Precautions for Terminals The retainer provides added protection and connectors " described on our website (Technical documents against non-insertion or disconnection.)

2 Of Product information page). * RoHS2 compliance Inner-housing lock * Dimensional unit: mm Secondary retainers * contact JST for details. Housing lance Mountable on a variety of panels Standards Contacts smoothly insert into the housings . Recognized E60389. without colliding with internal obstacles Certified LR20812.. Panel Layout and Assembly layout . (2 to 12 circuits) (18 circuits). ( ). ( ). A 0. A 0. 0. 0. B B Panel hole dimensions (mm) General tolerance No. of circuits Receptacle housing Applicable panel thickness (mm). A+ 0 B 2 XMR-02V 3 XMR-03V 4 XMR-04V 5 XMR-05V 6 XMR-06V 7 XMR-07V 8 XMR-08V 9 XMR-09V 10 XMR-10V 11 XMR-11V 12 XMR-12V 18 XMR-18V Note: 1.

3 Punch holes in the panel according to the sketch and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The CONNECTOR must be inserted from the same side as the hole is punched. 1. XM CONNECTOR . contact Pin contact Socket contact XM-Con XM CONNECTOR . Model No. Applicable wire Q'ty/reel Insulation Pin contact Socket contact mm2 AWG # (mm) Pin contact Socket contact 28 22 7,000 8,000. * 24 20 7,000 8,000. - 26 22 - 8,000. Material and Finish Phosphor bronze, tin-plated (re ow treatment). RoHS2 compliance Note: 1. contact JST for special products.

4 2. *Marked product is not UL/CSA approved. Crimping Applicator Crimping Applicator contact contact machine Crimp applicator Dies Crimp applicator with dies machine Crimp applicator Dies Crimp applicator with dies MK/SXA/M-001-06 APLMK SXA/M001-06 MK/SXA/M-001-06 APLMK SXA/M001-06. AP-K2N MKS-L. MK/SXA/M-01-06 APLMK SXA/M01-06 AP-K2N MKS-L MK/SXA/M-01-06 APLMK SXA/M01-06. Note: contact JST for fully automatic crimping applicator. MK/SXA-001-06L APLMK SXA001-06L. Note: contact JST for fully automatic crimping applicator. contact position location numbers contact position numbers are stamped Retainer Retainer Receptacle housing Plug housing 1 12.

5 2 11. 3 1 10 10 9 18. 4 2 11 9 8 17. 5 3 12 8 7 16. 6 4 13 7 6 15. 7 5 14 6 5 14. 8 6 15 5 4 13. 9 7 16 4 3 12. 10 8 17 3 2 11. 11 9 18 2 1 10. 12 1. 2. XM CONNECTOR XM-hausing Receptacle housing (for Pin contact ). No. of Dimensions (mm). (2 to 12 circuits) circuits Model No. Q'ty/bag A B. 2 XMR-02V 1,000. 3 XMR-03V 1,000. 4 XMR-04V 500. B. A. B. A. 5 XMR-05V 500. 6 XMR-06V 500. 7 XMR-07V 500. 8 XMR-08V 500. 9 XMR-09V 500. 10 XMR-10V 500. (18 circuits) 11 XMR-11V 500. 12 XMR-12V 500. 18 XMR-18V 500. A. Material and Finish B. A. PA 66, UL94V-0. RoHS2 compliance Note: Receptacle housings without panel lock device are also available for XM-hausing-Plug 2, 3, 4, 6, 7, 8 and 9 circuits.

6 Plug housing (for Socket contact ). No. of Dimensions (mm). (2 to 12 circuits) circuits Model No. A B. Q'ty/bag 2 XMP-02V 1,000. 3 XMP-03V 1,000. 4 XMP-04V 1,000. A. B. A. B. 5 XMP-05V 500. XMP-06V. 6 500. 7 XMP-07V 500. 8 XMP-08V 500. 9 XMP-09V 500. 10 XMP-10V 500. (18 circuits). 11 XMP-11V 500. 12 XMP-12V 500. 18 XMP-18V 500. A. B. A. B. Material and Finish PA 66, UL94V-0. RoHS2 compliance XM-Reta Retainer No. of circuits Model No. Dimensions A (mm) Q'ty/bag 2 XMS-02V 1,000. 3 XMS-03V 1,000. 4 XMS-04V 1,000. 5 XMS-05V 1,000. 6 XMS-06V 1,000. 7 XMS-07V 1,000. 8 XMS-08V 1,000. A. 9 18 XMS-09V 1,000. 10 XMS-10V 1,000.

7 11 XMS-11V 1,000. 12 XMS-12V 1,000. Material and Finish Glass- lled PA 66, UL94V-0. RoHS2 compliance Note: Commonly used for 9-circuit and 18-circuit housings. 3.