Standards for steel A handbook of tables from DIN Standards

1 Standards for steel A handbook of tables from DIN Standards Joachim Eube 1st edition 2008. Issued by: DIN Deutsches Institut f r Normung e. V. Beuth Verlag GmbH Berlin Wien Z rich Edited by: DIN Deutsches Institut f r Normung e. V. 2008 Beuth Verlag GmbH. Berlin Wien Z rich Burggrafenstr. 6. 10787 Berlin Germany Phone: +49 30 2601-0. Fax: +49 30 2601-1260. Website: E-mail: All rights reserved. Without written permission from the publisher, no part of this book may be used for purposes not permitted by German copyright law, including duplication, translation, microform reproduction and electronic storage processing. Copyright for DIN Standards held by DIN Deutsches Institut f r Normung e. V., Berlin. The contents of this work have been checked carefully by the authors and publisher, but no responsibility can be taken for their accuracy.

2 The pub- lisher accepts liability solely for damage caused by its own intent or gross negligence. Printing: Mercedes-Druck GmbH, Berlin Printed on acid-free permanent paper. ISBN 978-3-410-16716-7 (1st edition). Contents Page Foreword and information for users of this handbook .. VII. Standardization in Germany .. VIII. Contact addresses.. IX. Titles of abridged printed Standards .. X. Titles of Standards on CD-ROM.. XVI. Numerical list of Standards .. XXI. DIN Standards by subject group (abridged) .. 1. 1 Flat steel products .. 1. Thick plate and hot-rolled strip .. 3. Cold-rolled strip.. 180. Coated cold-rolled strip.. 339. 2 Long steel products .. 453. steel sections.. 455. Hot-rolled steel bars .. 515. steel rod.. 553. Bright steel bars.. 656. Drawn steel wire .. 705. Coated steel wire .. 781.

3 Subject index .. 827. Contents of CD-ROM. (full-text Standards ). A General Standards for steel and steel products Designation systems, marking, definitions Delivery conditions Selecting steels B Quality Standards Structural and reinforcing steels Structural steels for heat treatment Steels for forging Tool steels Free-cutting steels Heat resisting steels Stainless steels C steel tubes Alloyed and unalloyed steel tubes Fine grain steel tubes Structural steel tubes and hollow sections steel pipes steel tubes for for precision applications Subject index for Standards on CD-ROM. V. Foreword and information for users of this handbook Standards for steel are changing constantly, and many national Standards have been replaced by European Standards . There are now so many essential steel Standards that the contents of this hand- book have, for reasons of space, been split between the printed book and the CD-ROM.

4 The book contains a complete table of contents, and the index refers to both the book and the CD-ROM. The Standards printed in the book have been abridged, but include all the essential information on scope, ordering, chemical composition, properties and processing. In order to enable easy ref- erence to the full-text Standards , the original numbering of sections, figures and tables remains unchanged. Sections dealing with standardized aspects such as testing, customer complaints, and giving general information on internal faults and surface finishes have only been included if they are particularly important. The full-text versions of these Standards should therefore be referred to for contracts to supply steel products. The Standards included on the CD-ROM are reproduced in full. Together, the handbook and CD-ROM cover 174 DIN Standards and provide engineers, technicians, buyers and sellers of steel with a compact yet comprehensive overview of the properties of steel and steel products covered in current Standards .

5 February 2008. VII. Titles of abridged printed Standards (arranged by subject group). Document Date of Title number issue Page 1 Flat steel products Thick plate and hot-rolled strip DIN EN 10029 1991-10 Hot rolled steel plate 3 mm thick or above Tolerances on dimen- sions, shape and mass .. 3. DIN EN 10149-1 1995-11 Hot-rolled products made of high yield strength steels for cold forming General delivery conditions .. 6. DIN EN 10149-2 1995-11 Hot-rolled products made of high yield strength steels for cold forming Delivery conditions for thermomechanically rolled steels .. 17. DIN EN 10149-3 1995-11 Hot-rolled products made of high yield strength steels for cold forming Delivery conditions for normalized or normalized rolled steels .. 22. DIN EN 10164 2005-03 steel products with improved deformation properties perpendic- ular to the surface of the product Technical delivery conditions 27.

6 DIN EN 10028-1 2003-09 Flat products made of steels for pressure purposes Part 1: General requirements .. 36. DIN EN 10028-2 2003-09 Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties .. 42. DIN EN 10028-2 2006-05 Flat products made of steels for pressure purposes Part 2: Corrigendum 1 Non-alloy and alloy steels with specified elevated temperature properties Corrigendum 1 to DIN EN 10028-2:2003-09.. 60. DIN EN 10028-3 2003-09 Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized .. 61. DIN EN 10028-4 2003-09 Flat products made of steels for pressure purposes Part 4: Nickel alloyed steels with specified low temperature properties 71. DIN EN 10028-4 2006-05 Flat products made of steels for pressure purposes Part 4: Corrigendum 1 Nickel alloy steels with specified low temperature properties.

7 Corrigendum 1 to DIN EN 10028-4:2003:09 .. 77. DIN EN 10028-5 2003-09 Flat products made of steels for pressure purposes Part 5: Weldable fine grain steels, thermomechanically rolled .. 78. DIN EN 10028-6 2003-10 Flat products made of steels for pressure purposes Part 6: Weldable fine grain steels, quenched and tempered .. 84. DIN EN 10028-7 2008-02 Flat products made of steels for pressure purposes Part 7: Stainless steels .. 91. DIN EN 10207 2005-06 Steels for simple pressure vessels Technical delivery require- ments for plates, strips and bars .. 131. DIN EN 10048 1996-10 Hot rolled narrow steel strip Dimensional and geometrical toler- ances .. 138. X. Document Date of Title number issue Page DIN EN 10051 1997-11 Continuously hot rolled uncoated unalloyed and alloy steel plate, sheet and strip Tolerances on dimensions and shape (includes Amendment A1:1997).

8 157. DIN EN 10111 1998-03 Continuously hot-rolled low carbon steel sheet and strip for cold forming Technical delivery conditions.. 174. Cold-rolled strip DIN EN 10131 2006-09 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming Tolerances on dimensions and shape .. 180. DIN EN 10140 2006-09 Cold rolled narrow steel strip Tolerances on dimensions and shape .. 187. DIN EN ISO 9445 2006-05 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths Tolerances on dimensions and form (ISO 9445:2002) .. 194. DIN 1623-2 1986-02 steel flat products Cold reduced sheet and strip Technical delivery conditions General purpose structural steels .. 208. DIN EN 10130 2007-02 Cold rolled low carbon steel flat products for cold forming Tech- nical delivery conditions.

9 211. DIN EN 10139 1997-12 Cold rolled uncoated mild steel narrow strip for cold forming . Technical delivery conditions.. 217. DIN EN 10303 2001-07 Thin magnetic steel sheet and strip for use at medium frequen- cies .. 234. DIN EN 10106 2007-11 Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state .. 244. DIN EN 10107 2005-10 Grain-oriented electrical steel sheet and strip delivered in the fully processed state .. 256. DIN EN 10341 2006-08 Cold rolled electrical non-alloy and alloy steel sheet and strip de- livered in the semi-processed state.. 268. DIN EN 10209 1996-05 Cold rolled low carbon steel flat products for vitreous enamelling Technical delivery conditions .. 279. DIN EN 10132-1 2000-05 Cold-rolled narrow steel strip for heat-treatment Technical de- livery conditions Part 1: General.

10 297. DIN EN 10132-2 2000-05 Cold-rolled narrow steel strip for heat-treatment Technical de- livery conditions Part 2: Case hardening steels .. 303. DIN EN 10132-3 2000-05 Cold-rolled narrow steel strip for heat-treatment Technical de- livery conditions Part 3: Steels for quenching and tempering .. 308. DIN EN 10132-4 2003-04 Cold-rolled narrow steel strip for heat-treatment Technical de- livery conditions Part 4: Spring steels and other applications .. 314. DIN EN 10151 2003-02 Stainless steel strip for springs Technical delivery conditions .. 322. Coated cold-rolled strip DIN EN 10143 2006-09 Continuously hot-dip coated steel sheet and strip Tolerances on dimensions and shape .. 339. XI. Document Date of Title number issue Page DIN EN 10326 2004-09 Continuously hot-dip coated strip and sheet of structural steels.