Professional Metal Film Leaded Resistors - Vishay

1 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Beyschlag Revision: 11-Jul-20181 Document Number: 28766 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Metal film Leaded ResistorsDESIGN SUPPORT TOOLSDESCRIPTIONMBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414 Professional Leaded thin film Resistors are the general purpose resistor for all fields of Professional electronics where reliability and stability is of major concern. Typical applications include industrial, telecommunication, automotive, and medical CECC version (IECQ-CECC approved according to EN 140101-806) Excellent overall stability: class Wide ohmic range: to 22 M AEC-Q200 qualified available (1) Radial version available for MBB/SMA 0207 Alternative termination wires available weldable wire (MBA/SMA 0204 only) Material categorization.

2 For definitions of compliance please see (1)AEC-Q200 qualified parts are available per tables Temperature Coefficient and Resistance Range APPLICATIONS Industrial Telecommunication Medical equipment AutomotiveNotes MB_ series has been merged with the related SMA series to form one series MB_/SMA__ (2)Please refer to APPLICATION INFORMATION belowclick logo to get startedAvailableModelsTECHNICAL SPECIFICATIONSDESCRIPTIONMBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 DIN size020402070414 CECC sizeABDR esistance to 10 M ; 0 to 22 M ; 0 to 22 M Resistance tolerance 5 %; 1 %; %Temperature coefficient 50 ppm/K; 25 ppm/KRated dissipation, P70 (2) WOperating voltage, Umax. AC/DC200 V350 V500 VOperating temperature range (2)-55 C to 155 CPeak permissible film temperature (2)155 C155 C155 CInsulation voltage:1 min.

3 ; Uins300 V500 V800 VContinuous75 V75 V75 VFailure rate: FITobserved x 10-9/h x 10-9/h x 10-9/hMBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Beyschlag Revision: 11-Jul-20182 Document Number: 28766 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT INFORMATIONThe power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board materials may be required to maintain the reliability of the Resistors do not feature a limited lifetime when operated within the permissible limits.

4 However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and temperature limits in order to maintain a desired RESISTANCE CHANGE AT RATED DISSIPATIONO peration modeStandardPowerClimatic category -55 C / +125 C / 56 days-55 C / +155 C / 56 daysRated dissipation, P70 MBA/SMA WMBB/SMA WMBE/SMA WApplied maximum film temperature, F C155 CMax. resistance change at rated dissipation | R/R max.|, after:MBA/SMA 02041 to 475 k 1 to 475 k 1000 h % %8000 h % %225 000 h % MBB/SMA 02071 to 1 M 1 to 1 M 1000 h % %8000 h % %225 000 h % MBE/SMA 04141 to M 1 to M 1000 h % %8000 h % %225 000 h % MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Beyschlag Revision: 11-Jul-20183 Document Number: 28766 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

5 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability(1)Resistance value to be selected from E24 series for 5 %, 2 %, from E24/E96 series for 1 % tolerance and from E24/E192 for % tolerance(2)AEC-Q200 qualification applies to products with TCR = 50 ppm/K and tolerance = 1 % in the ranges of 10 to 301 k for MBA/SMA 0204, 10 to M for MBB/SMA 0207, and 10 to 22 M for MBE/SMA 0414 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - Standard ProductsTYPETCRTOLERANCERESISTANCE (1)(2)E-SERIESMBA/SMA 0204 50 ppm/K 5 % to E24 1 %1 to 10 M E24; E96 %10 to 475 k E24; E192 25 ppm/K 1 %10 to 475 k E24; E96 %10 to 475 k E24; E192 Jumper-< 10 m ; Imax.

6 = 3 A-MBB/SMA 0207 50 ppm/K 5 % to 11 M to 22 M E24 1 %1 to 10 M E24; E96 2 % to E24 %10 to 1 M E24; E192 25 ppm/K 1 %10 to 1 M E24; E96 %10 to 1 M E24; E192 Jumper-< 10 m ; Imax. = 5 A-MBE/SMA 0414 50 ppm/K 5 % to E24 1 %1 to 22 M E24; E96 %10 to M E24; E192 25 ppm/K 1 %10 to M E24; E96 %10 to M E24; E192 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Beyschlag Revision: 11-Jul-20184 Document Number: 28766 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER Standard products are not CECC approved Radial version (RB,UB) cannot be qualified according to CECC so these can only be ordered as standard productsPART NUMBER AND PRODUCT DESCRIPTION - Standard ProductsPART NUMBER.

7 MBB02070C1001 FCT00 MBB02070C1001 FCT00 TYPE/SIZEVARIANTTCRRESISTANCETOLERANCEPA CKAGINGSPECIALMBA0204 = MBA/SMA 0204 MBB0207 = MBB/SMA 0207 MBE0414 = MBE/SMA 04140 = neutralN = RB radial5 mm for MBB/SMA0207S = UB mm for MBB/SMA0207I = L0 welding joint not lacquered for MBB/SMA 0207B = KL lacquered welding joint for MBA/SMA 0204D = Ni wire for MBA/SMA 0204D = 25 ppm/KC = 50 ppm/KZ = jumper3 digit value1 digit multiplierMULTIPLIER7 = *10-38 = *10-29 = *10-10 = *1001 = *1012 = *1023 = *1034 = *1045 = *1056 = *1060000 = jumperD = %F = 1 %G = 2 %J = 5 %Z = jumperCTC1 RPR2R4N400 = standardSpecial terminationwires for MBA/SMA 0204:FE = coppered steelCA = tinned CuAgNS = tinned NiProduct Description: MBB/SMA 0207-50 1 % CT 1K0 MBB/SMA 0207-501 %CT1K0 TYPE/SIZETCRTOLERANCEVARIANTPACKAGINGRES ISTANCEMBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 25 ppm/K 50 ppm/K % % % %RBUBL0KL NISNAGCTC1 RPR2R4N41K0 = 1 k 51R1 = MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Beyschlag Revision: 11-Jul-20185 Document Number: 28766 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

8 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability(1)Resistance value to be selected from E24 series for 5 %, from E24/E96 series for 1 % tolerance and from E24/E192 for % tolerance(2)AEC-Q200 qualification applies to products with TCR = 50 ppm/K and tolerance = 1 % in the ranges of 10 to 301 k for MBA/SMA 0204, 10 to M for MBB/SMA 0207, and 10 to 22 M for MBE/SMA 0414 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - CECC Approved ProductsTYPETCRTOLERANCERESISTANCE (1)(2)E-SERIESMBA/SMA 0204 50 ppm/K 5 % to E24 1 %1 to 10 M E24; E96 %10 to 475 k E24; E192 25 ppm/K 1 %10 to 475 k E24; E96 %10 to 475 k E24; E192 Jumper-< 10 m ; Imax.

9 = 3 A-MBB/SMA 0207 50 ppm/K 5 % to 11 M to 22 M E24 1 %1 to 10 M E24; E96 %10 to 1 M E24; E192 25 ppm/K 1 %10 to 1 M E24; E96 %10 to 1 M E24; E192 Jumper-< 10 m ; Imax. = 5 A-MBE/SMA 0414 50 ppm/K 5 % to E24 1 %1 to 22 M E24; E96 %10 to M E24; E192 25 ppm/K 1 %10 to M E24; E96 %10 to M E24; E192 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Beyschlag Revision: 11-Jul-20186 Document Number: 28766 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Approval is according to EN 140101-806, version A Radial version (RB, UB) cannot be qualified according to CECC so these can only be ordered as standard productsNote(1)Manufacturing at different production locations may involve use of different size boxPART NUMBER AND PRODUCT DESCRIPTION - CECC Approved ProductsPART NUMBER.

10 MBB0207VC1001 FCT00 MBB0207VC1001 FCT00 TYPE/SIZEVARIANTTCRRESISTANCETOLERANCEPA CKAGINGSPECIALMBA0204 = MBA/SMA 0204 MBB0207 = MBB/SMA 0207 MBE0414 = MBE/SMA 0414V = CECC 06D = 25 ppm/KC = 50 ppm/KZ = jumper3 digit value1 digit multiplierMULTIPLIER7 = *10-38 = *10-29 = *10-10 = *1001 = *1012 = *1023 = *1034 = *1045 = *1056 = *1060000 = jumperD = %F = 1 %J = 5 %Z = jumperCTC1 RPR200 = standardL0 = welding joint not lacquered for MBB/SMA 0207KL = lacquered welding joint for MBA/SMA 0204 Product Description: MBB/SMA 0207-50 1 % CECC 06 CT 1K0 MBB/SMA 0207-501 %CECC 06CT1K0 TYPE/SIZETCRTOLERANCEVARIANTPACKAGINGRES ISTANCEMBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 25 ppm/K 50 ppm/K % % %CECC 06 CECC 06 L0 CECC 06 KLCTC1 RPR21K0 = 1 k 51R1 = PACKAGINGTYPE / SIZECODEQUANTITYPACKAGING STYLEWIDTHPITCHDIMENSIONSMBA/SMA 0204C11000 Taped acc.