Transcription of Emboss Tape FMS CONNECTOR - jst-mfg.com
1 1 The FMS series connectors are designedfor surface mounting (SMT) and to meetthe demand for high-density are miniature connectors with aheight of only , and can be suppliedpackaged in embossed tape to facilitateautomatic CompactThis CONNECTOR measures in pitch, in mountingheight, and in width. Double-sided contactThis CONNECTOR has highly resilient phosphor bronze contacts,each of which has two independent mating spring members that ensure continuity even when subjected to severe each of the contacts simultaneously mates with bothsides of the FFC, the engineer has greater freedom in designinghis circuitry. Simple snap-in actionThe FFC is securely connected by simply inserting its leads into the CONNECTOR .
2 SMT configurationIts housing is made of heat resistant resin so that it is notadversely affected during reflow soldering. Because of its tinysize and ability to be surface mounted, this CONNECTOR meetsthe demand for high-density mounting of components insideelectronic products. Solder tabsThis CONNECTOR also features reinforcing solder tabs to preventlifting of the CONNECTOR during mating and Current rating: AC, DC Voltage rating: 50V AC, DC Temperature range: -25 C to +85 C(including temperature rise in applying electrical current) Contact resistance:Initial value/20m max. After environmental testing/30m max. Insulation resistance: 800M min. Withstanding voltage: 500V AC/minute Applicable FFC: Conductor Conductor part <Note>FFC to be actually used should be checked for applicability.
3 * Compliant with RoHS.* Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog.* Contact JST for 0 Recognized E603891 Certified LR20812 FMS CONNECTOR Connectors for Tape2 FMS CONNECTORLead section dimensions of FFC layerConductorReinforcing layerFilm cover (N+1) (N-1) : N --- Number of circuitsConnector (mm)ABQ'ty / reelMaterial and ,5002,5002,5002,5002,5002,0002,0002,0002 , : Phosphor bronze, copper-undercoated, tin-plated (reflow treatment)Housing: PPS, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)Note.
4 The products listed above are supplied on embossed complianceThis product displays (LF)(SN) on a board layout (viewed from component side)and Assembly layout : 1. Tolerances are non-cumulative: for all The dimensions above should serve as a JST for details.
