Cassette Sprocket (11-speed) - Shimano

1 (English)DM-CS0004-04 Dealer's ManualCassette Sprocket (11- speed )CS-9000CS-6800CS-58002 IMPORTANT NOTICE This dealer's manual is intended primarily for use by professional bicycle mechanics. Users who are not professionally trained for bicycle assembly should not attempt to install the components themselves using the dealer's any part of the information on the manual is unclear to you, do not proceed with the installation. Instead, contact your place of purchase or a local bicycle dealer for their assistance. Make sure to read all instruction manuals included with the product. Do not disassemble or modify the product other than as stated in the information contained in this dealer's manual.

2 All dealer's manuals and instruction manuals can be viewed on-line on our website ( ). Please observe the appropriate rules and regulations of the country, state or region in which you conduct your business as a safety, be sure to read this dealer's manual thoroughly before use, and follow it for correct following instructions must be observed at all times in order to prevent personal injury and physical damage toequipment and instructions are classified according to the degree of danger or damage which may occur if the product is to follow the instructions will result in death or serious to follow the instructions could result in death or serious to follow the instructions could cause personal injury or physical damage to equipment and ENSURE SAFETYWARNING When installing components, be sure to follow the instructions that are given in the instruction manuals.

3 It is recommended to use genuine Shimano parts only. If parts such as bolts and nuts become loose or damaged, the bicycle may suddenly fall over, which may cause serious injury. In addition, if adjustments are not carried out correctly, problems may occur, and the bicycle may suddenly fall over, which may cause serious injury. Be sure to wear safety glasses or goggles to protect your eyes while performing maintenance tasks such as replacing parts. After reading the dealer's manual thoroughly, keep it in a safe place for later sure to also inform users of the following: If the chain keeps coming off the chainrings during use, replace the chainrings and the chain.

4 Products are not guaranteed against natural wear and deterioration from normal use and aging. For maximum performance we highly recommend Shimano lubricants and maintenance Installation to the Bicycle, and Maintenance: Always use CS-9000/6800/5800 in combination with CN-9000/6800/CN-HG600-11. Other chains cannot be used because the dimensions do not match. The gears should be periodically washed with a neutral detergent. In addition, cleaning the chain with neutral detergent and lubricating it can be an effective way of extending the life of the gears and the chain. Always use the recommended combination of actual product may differ from the illustration because this manual is intended mainly to explain the procedures for using the each Sprocket , the surface that has the group mark should face outward and be positioned so that the wide parts of the gear projections on each Sprocket and the A part (where the groove width is wide) of the freewheel body are partAThe groove has only one wide section.

5 < CS-9000: 11T- 23T, 11T- 25T, 11T- 28T, 12T- 25T, 12T- 28T > Sprocket spacers1 Lock ring23456789101111-23T11-25T11-28 TNumberNumber of teethMarkSpider armNumber of teethMarkSpider armNumber of teethMarkSpider arm12311S 23A11S 11-232511S 25A11S 11-252811S 28A11S 11-2822111S 21A2311S 23B2511S 25B31911S 19A11S 11-232111S 21B11S 11-252311S 23C11S 11-2841811S 18A1911S 19B2111S 21C51711S 17A1711S 17A1911S 19C61611S 16A 1611S 16A 1711S 17B 71511S 15A 1511S 15A 1511S 15A 81411S 14A 1411S 14A 1411S 14A 91311S 13A 1311S 13A 1311S 13A 101211S 12A 1211S 12A 1211S 12A 111111S 11A 1111S 11A 1111S 11A 12-25T12-28 TNumberNumber of teethMarkSpider armNumber of teethMarkSpider arm12511S 25A11S

6 12-252811S 28A11S 12-2822311S 23B2511S 25B32111S 21D11S 12-252311S 23C11S 12-2841911S 19D2111S 21C51811S 18B1911S 19C61711S 17C 1711S 17C 71611S 16A 1611S 16A 81511S 15A 1511S 15A 91411S 14A 1411S 14A 101311S 13B 1311S 13B 111211S 12B 1211S 12B 5< CS-6800: 11T-23T, 11T-25T, 11T- 28T, 11T-32T, 12T-25T > Sprocket spacersLock ring123456789101111-23T11-25T11-28 TNumberNumber of teethMarkSpider armNumber of teethMarkSpider armNumber of teethMarkSpider arm12311S 23A11S 11-232511S 25A11S 11-252811S 28A11S 11-2822111S 21A2311S 23B2511S 25B31911S 19A2111S 21B2311S 23C41811S 18A11S 11-231911S 19B11S 11-252111S 21C11S 11-2851711S 17A1711S 17A1911S 19C61611S 16A 1611S 16A 1711S 17B 71511S 15A 1511S 15A 1511S 15A 81411S 14A 1411S 14A 1411S 14A 91311S 13A 1311S 13A 1311S 13A 101211S 12A 1211S 12A 1211S 12A 111111S 11A 1111S 11A 1111S 11A 11-32T12-25 TNumberNumber of teethMarkSpider armNumber of teethMarkSpider arm13211S 32A11S

7 11-322511S 25A11S 12-2522811S 28B2311S 23B32511S 25C2111S 21B42211S 22A11S 11-321911S 19D11S 12-2552011S 20A1811S 18B61811S 18C 1711S 17C 71611S 16B 1611S 16A 81411S 14A 1511S 15A 91311S 13A 1411S 14A 101211S 12A 1311S 13B 111111S 11A 1211S 12B 6< CS-6800: 14T-28T > Sprocket spacersLock ring123456789101114-28 TNumberNumber of teethMarkSpider arm12811S 28A11S 14-2822511S 25B32311S 23C42111S 21E11S 14-2852011S 20C61911S 19F-71811S 18D-81711S 17C-91611S 16A-101511S 15B-111411S 14B-Note:For junior teeth group adjustment, also check the adjustment section in the rear derailleur dealer's < CS-5800: 11T-28T, 11T-32T, 12T-25T > Sprocket spacersLock ring123475689101111-28T11-32T12-25 TNumberNumber of teethMarkSpider armNumber of teethMarkSpider armNumber of teethMarkSpider arm12811S 28A11S 11-283211S 32A11S 11-322511S 25A11S 12-2522511S 25B2811S 28B2311S 23B32311S 23C2511S 25C2111S 21B42111S 21D 2211S 22B 1911S 19F 51911S 19E 2011S 20B 1811S 18D 61711S 17B 1811S 18C 1711S 17C 71511S 15A 1611S 16B 1611S 16A 81411S 14A 1411S 14A 1511S 15A 91311S 13A 1311S 13A 1411S 14A 101211S 12A 1211S 12A 1311S 13B 111111S 11A 1111S 11A 1211S 12B For installation of the HG sprockets.

8 Use the Shimano original tool TL-LR15 to tighten the lock ring. To replace the HG sprockets, use the Shimano original tool TL-LR15 and TL-SR23 to remove the lock torque:30 - 50 N mLock ringDisassemblyTL-LR15TL-SR23 Please note: specifications are subject to change for improvement without notice. (English) Dec. 2016 by Shimano Inc. ITP