Global Roofing Solutions IBR 890 / Supa-Clad & IBR …

1 Global Roofing SolutionsIBR 890 / Supa-Clad & IBR 686 Talk to us, THE SMART ROOF PEOPLEV isit or ProfileIBR 686 The profile shall have five trapezoidal ribsat mm centres giving a nett cover of686 mm with each pan incorporating onestiffener rib. The rib height shall be 37 do not recommend IBR 686 be rolledwithout a stiffener rib in the pan, due tothe possibility of oil 890 / Supa-CladThe profile shall have six trapezoidal ribs at 178 mm centres giving a nettcover of 890 mm with each panincorporating one stiffener rib. The ribheight shall be 37 mm. We do notrecommend IBR 890 be rolled without astiffener rib in the pan, due to thepossibility of oil IBR sheeting shall be laid in strictaccordance with the manufacturer lengthIBR is available in sheet lengths limitedonly by transport restrictions, normalloads m.

2 With special transportarrangements lengths up to m canbe endings must be formed at theapex to form a dam and the pan turneddown to form a drip. The roof sheetingshall be closed as necessary withpurpose made flashings andpolyclosures where necessary. Roof pitchIBR may be used at a minimum roofpitch of 5 for sheet lengths up to 30 minimum of is required for sheetlengths greater than 30 m. For bothconditions an approved end-lap sealingstrip is 686can be cranked from a mini-mum radius of 409mm for materialthicknesses of and ; and450mm radius for 890 / Supa-Cladcan be crankedfrom a minimum radius of 450mm. CurvingIBR can be curved to any radius greaterthan 600 mm for IBR 686, and 800 mmfor IBR 890 / Supa-Clad subject totransportation handlingIBR sheets should be supported clear ofthe ground and kept well ventilatedunder cover until required to be upThe complete roof must be cleaned of alldebris before handing assuranceThe manufacturer shall be assessed and certified as complying with ISO 9001:2008 Quality 686 The Roofing / side cladding shall be IBR 686 profile, in (select from table below).

3 IBR 686 isobtained from Global Roofing Solutions (Pty) 890 / Supa-CladThe Roofing / side cladding shall be IBR 890 / Supa-Clad profile and can be light industrial /heavy industrial in (select from table below). IBR 890 / Supa-Clad is obtained from GlobalRoofing Solutions (Pty) One SideColour Two SideGalvanised Z275 ISQ 550 for 300 for 230 for chromadek Z200 SpecialZincalume AZ150G550 Clean COLORBOND AZ150 SpecialZincAL AZ150G550 COLORPLUS AZ150 SpecialMaterialSteelColour One SideColour Two SideGalvanised Z275 ISQ 550 chromadek Z200 SpecialZincalume AZ150G550 Clean COLORBOND AZ150 SpecialZincAL AZ150G550 COLORPLUS AZ150 SpecialTypical specificationIBR 890 / Supa-CladIBR 686 IBR 686 Maximum Allowable Support Spacings (mm)

4 ZINCALUME /COLORBOND GALVANISED / chromadek ZINCAL / COLORPLUS mmG550 TYPE OF SPANR oofsSingle SpanEnd SpanInternal SpanCantileverWallsSingle SpanEnd SpanInternal SpanCantileverNormal mass mmISQ mmISQ 890 / Supa-Clad Maximum Allowable Support Spacings (mm)ZINCALUME / COLORBOND GALVANISED / chromadek TYPE OF mmISQ 550 (3T) mmISQ 300 (3T) SpanEnd SpanInternal SpanCantileverWallsSingle SpanEnd SpanInternal SpanCantileverNormal mass : IBR 686 & IBR 890 / Supa-CladNoteFasteners must be selected to match the life expectancy of the Roofing and cladding material. Class 3 fasteners, complyingwith SANS 1273, should be used in conjunction with all Roofing and cladding material.

5 For a full range of compatiblefasteners, please refer to the GRS Installation visit our website or contact GRS for standard flashing detailsGRS IBR 08/15 Available in mm / mm thick commercial quality galvanised Z275steel, mm thick Zincalume AZ150 or mm thick ZincAL AZ150. Orwith a colour option chromadek (Galvanised Z200), Clean COLORBOND (Zincalume AZ150) or COLORPLUS (ZincAL AZ150) finish to one / two : Fasteners must be selected to match the life expectancy of the Roofing material. Fasternerscomplying with AS3566 Class 3 should be used in conjunction with 55% Aluminium-Zinc Alloy coated steelPopular flashingsAssemblyNoteFasteners must be selected to match the lifeexpectancy of the Roofing material. Class 3fasteners, complying with SANS 1273, should beused in conjunction with all Roofing and (011) 898 2900 Fax: (011) 892 1455 Cape TownTel: (021) 521 1900 Fax: (021) 556 6936 DurbanTel: (031) 538 0940/1/2 Fax: (031) 502 3764 East London Tel: (043) 731 1895/98 Fax: (043) 731 1926 Bloemfontein Tel: (051) 432 3724/6 Fax: (051) 432 3723 Rustenburg Tel: (014) 596 6121 Fax: 086 644 8344 ZambiaTel: +260967495541 BotswanaTel: +267 3105761 Fax: +267 3105762 NamibiaTel: +264(0)61 263890 Fax: +264(0)61 263890 ZimbabweTel: +263 4 774 699 GRS Exports Tel: (011) 898 2900 Fax: (011) 892 1455 Helm Engineering Tel: (011) 876 1300 Fax: (011) 876 1304