VISCOR® CALIBRATION FLUIDS - fuchsnet.gr

1 viscor CALIBRATION FLUIDS CALIBRATION FLUIDS for diesel fuel pumps & injectors Description Diesel engine and fuel injection system manufacturers long ago recognised the need for a diesel fuel reference fluid for use in calibrating pumps and nozzles. Prior to the late 1960 s, every major OEM had different specifications for diesel fuel reference fluid . The Society of Automotive Engineers (SAE) and the International Standards Organization (ISO), composed of all major OEM s and related component suppliers, teamed up to develop a single uniform fluid that could be used to calibrate all automotive and truck diesel fuel injection systems. Application viscor 1487 AW-2 provides anti-wear protection required by Bosch, and is approved and used by all major fuel system, engine and test stand manufacturers.

2 viscor CALIBRATION FLUIDS are used to calibrate, flow test and flush diesel fuel injection system pumps, injector nozzles and piping in both OEM and recon applications. They are formulated to provide guaranteed viscosity and specific gravity (density) ranges, humidity and galvanic corrosion protection, light colour for leak testing, oxidation stability for long test and sump life, anti-wear (scoring) protection, foam resistance and a high flash point for reduced risk of fire. Advantages/Benefits Purpose formulated for the CALIBRATION of diesel injectors and fuel pumps Very close manufacturing tolerances Low odour Full range of products to suit all applications Oxidation inhibitors prevent lacquer and deposit formation Specifications/Approvals viscor CALIBRATION FLUIDS meet the requirements of SAE J967 and ISO 4113 Health, Safety and Environment - information is provided for products in the relevant Safety Data Sheet.

3 This provides guidance onpotential hazards, precautions and first-aid measures, together with environmental effects and disposal of used products. May 2013 GDUK Page 1 of 2 FUCHS LUBRICANTS (UK) PLC Tel: +44-1782 -20 37 00 New Century Street, Hanley Fax: +44-1782 -20 20 73 GB-Stoke-on-Trent, Staffordshire, ST1 5HU Email: While the information and figures given here are typical of current production and conform to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products CHARACTERISTICS: viscor CALIBRATION FLUIDS Characteristics Unit viscor 1487 viscor 1487 AW-2 Test Method Colour (after 6 months) 2 max.

4 2 max. ASTM D1500 ISO Classification 4113 4113 Kinematic viscosity at 40 C mm2/s SAE Spec Flash point C 75 75 ASTM D56 Specific gravity at C SAE Spec Steel corrosion 24 hours at 25 C Pass Pass ASTM D665B Copper corrosion 3 hr at 100 C 1B max. 1B max. ASTM D130 Foaming tendency after 5 min. blowing at 24 C ml 50 max. 50 max. ASTM D892 Foaming stability at 24 C ml 0 max. 0 max. ASTM D892 Anti-Wear (1450 rpm, 25 C, 10 sec.) Scar Diameter @ 300 N Scar Diameter @ 400 N mm mm - - max. max. ASTM D-4172 / Bosch viscor is the registered trade mark of Rock Valley Oil & Chemical Company, USA viscor CALIBRATION FLUIDS are speciality products made in the UK under licence by FUCHS LUBRICANTS (UK) plc and are intended primarily for the CALIBRATION of diesel engine fuel pumps and injectors.

5 Health, Safety and Environment - information is provided for products in the relevant Safety Data Sheet. This provides guidance onpotential hazards, precautions and first-aid measures, together with environmental effects and disposal of used products. May 2013 GDUK Page 2 of 2 FUCHS LUBRICANTS (UK) PLC Tel: +44-1782 -20 37 00 New Century Street, Hanley Fax: +44-1782 -20 20 73 GB-Stoke-on-Trent, Staffordshire, ST1 5HU Email: While the information and figures given here are typical of current production and conform to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products