Standard SMD LED PLCC-2 - Vishay

1 VLMH310., VLMO310., VLMY310., VLMG310., Semiconductors Rev. , 07-Mar-181 Document Number: 84789 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT SMD LED PLCC-2 DESCRIPTIONT hese devices have been designed to meet the increasing demand for surface mounting package of the is the consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear GROUP AND PACKAGE DATA Product group: LED Package: SMD PLCC-2 Product series: Standard Angle of half intensity: 60 FEATURES SMD LEDs with exceptional brightness Luminous intensity categorized Compatible with automatic placement equipment EIA and ICE Standard package Compatible with infrared, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 Available in 8 mm tape Low profile package Non-diffused lens: excellent for coupling to light pipes and backlighting Low power consumption Luminous intensity ratio in one packaging unit Preconditioning according to JEDEC level 2a AEC-Q101 qualified Material categorization.

2 For definitions of compliance please see Automotive: backlighting in dashboards, and switches Telecommunication: indicator and backlighting in telephone and fax Indicator and backlight for audio and video equipment Indicator and backlight in office equipment Flat backlight for LCDs, switches, and symbols General use948553 PARTS TABLEPARTCOLORLUMINOUS INTENSITY(mcd)at IF(mA)WAVELENGTH(nm)at IF(mA)FORWARD VOLTAGE(V)at IF(mA) on on on on on on GaPVLMO3100-GS08 Soft on GaPVLMO3100-GS18 Soft on GaPVLMO3101-GS08 Soft on GaPVLMO3101-GS18 Soft on on on on on on on GaPVLMH310., VLMO310., VLMY310., VLMG310., Semiconductors Rev. , 07-Mar-182 Document Number: 84789 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

3 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)In one packing unit on on on on on on GaPVLMP3100-GS08 Pure on GaPVLMP3100-GS18 Pure on GaPVLMP3101-GS08 Pure on GaPVLMP3101-GS18 Pure on GaPVLMP3102-GS08 Pure on GaPVLMP3102-GS18 Pure on GaPABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) VLMG310. ,VLMH310. ,VLMO310. ,VLMP310. , CONDITIONSYMBOLVALUEUNITR everse voltageVR6 VDC forward currentTamb 60 CIF30mASurge forward currenttp 10 dissipationTamb 60 CPV100mWJunction temperatureTj100 COperating temperature rangeTamb-40 to +100 CStorage temperature rangeTstg-40 to +100 CSoldering temperaturet 5 sTsd260 CThermal resistance junction-to-ambient Mounted on PC board (pad size > 16 mm2)RthJA400K/WOPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VLMH310.

4 , AMBERPARAMETERTEST intensity (1)IF = 10 wavelengthIF = 10 mA d612619625nmPeak wavelengthIF = 10 mA p-635-nmAngle of half intensityIF = 10 mA - 60- degForward voltageIF = 20 voltageIR = 10 AVR615- VJunction capacitanceVR = 0 V, f = 1 MHzCj-15-pFPARTS TABLEPARTCOLORLUMINOUS INTENSITY(mcd)at IF(mA)WAVELENGTH(nm)at IF(mA)FORWARD VOLTAGE(V)at IF(mA) , VLMO310., VLMY310., VLMG310., Semiconductors Rev. , 07-Mar-183 Document Number: 84789 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)In one packing unit (1)In one packing unit (1)In one packing unit OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VLMO310., SOFT ORANGEPARAMETERTEST intensity (1)IF = 10 wavelengthIF = 10 mA d598605611nmPeak wavelengthIF = 10 mA p-605-nmAngle of half intensityIF = 10 mA - 60- degForward voltageIF = 20 voltageIR = 10 AVR615 - VJunction capacitanceVR = 0 V, f = 1 MHzCj-15-pFOPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VLMY310.

5 , YELLOWPARAMETERTEST intensity (1)IF = 10 wavelengthIF = 10 mA d581588594nmPeak wavelengthIF = 10 mA p-585-nmAngle of half intensityIF = 10 mA - 60- degForward voltageIF = 20 voltageIR = 10 AVR615 - VJunction capacitanceVR = 0 V, f = 1 MHzCj-15-pFOPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VLMG310., GREENPARAMETERTEST intensity (1)IF = 10 wavelengthIF = 10 mA d562572575nmPeak wavelengthIF = 10 mA p-565-nmAngle of half intensityIF = 10 mA - 60- degForward voltageIF = 20 voltageIR = 10 AVR615 - VJunction capacitanceVR = 0 V, f = 1 MHz--15-pFVLMH310., VLMO310., VLMY310., VLMG310., Semiconductors Rev. , 07-Mar-184 Document Number: 84789 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)In one packing unit Wavelengths are tested at a current pulse duration of 25 ms Note Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %.

6 The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VLMP310., PURE GREENPARAMETERTEST intensity (1)IF = 10 wavelengthIF = 10 mA d555560565nmPeak wavelengthIF = 10 mA p-555-nmAngle of half intensityIF = 10 mA - 60- degForward voltageIF = 20 voltageIR = 10 AVR615 - VJunction capacitanceVR = 0 V, f = 1 MHzCj-15-pFCOLOR CALSSIFICATIONGROUPYELLOWGREENSOFT ORANGEPURE GREENDOM.

7 WAVELENGTH (nm)DOM. WAVELENGTH (nm) INTENSITY CLASSIFICATIONGROUPLIGHT INTENSITY (mcd) , VLMO310., VLMY310., VLMG310., Semiconductors Rev. , 07-Mar-185 Document Number: 84789 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT CHARACTERISTICS (Tamb = 25 C, unless otherwise specified)Fig. 1 - Maximum Permissible Forward Current vs. Ambient TemperatureFig. 2 - Permissible Pulse Forward Current vs. Pulse DurationFig. 3 - Relative Luminous Intensity vs. Angular DisplacementFig. 4 - Forward Current vs. Forward VoltageCROSSING TABLEVISHAYOSRAMSTANLEYVLMH3100--VLMH310 1--VLMH3102--VLMO3100 LOT670J1L2-VLMO3101 LOT670J1K2-VLMY3100 LYT670J1L2-VLMY3101 LYT670J1K2-VLMY3102 LYT670K1L2-VLMG3100 LGT670K1M2 VYBG1104 BVLMG3102 LGT670L1L2-VLMG3105 LGT671K1L2-VLMP3100 LPT670F2J2-VLMP3101 LPT670G1H2 VYBG1101 WVLMP3102 LPT670H1J2-01020304060IF - Forward Current (mA)95 1090550 Tamb - Ambient Temperature ( C) 000tp - Pulse Length (ms)10095 9985IF - Forward Current (mA)DCtp/T = < 60 30 10 20 40 50 60 70 80 rel - Relative Luminous Intensity - Angular - Forward Voltage (V)5432IF - Forward Current (mA)Amber10 VLMH310.

8 , VLMO310., VLMY310., VLMG310., Semiconductors Rev. , 07-Mar-186 Document Number: 84789 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 5 - Relative Luminous Intensity vs. Ambient TemperatureFig. 6 - Specific Luminous Intensity vs. Forward Current/Duty CycleFig. 7 - Relative Luminous Intensity vs. Forward CurrentFig. 8 - Relative Intensity vs. WavelengthFig. 9 - Forward Current vs. Forward VoltageFig. 10 - Relative Luminous Intensity vs. Ambient rel - Relative Luminous IntensityTamb - Ambient Temperature ( C)0 (mA)tp - Specific Luminous - Forward Current (mA)100101IV rel - Relative Luminous Intensity - Wavelength (nm) rel - Relative Intensity 9990I - Forward Current (mA)F soft orangeVF- Forward Voltage (V)54321095 9994soft rel - Relative Luminous IntensityTamb - Ambient Temperature ( C)020406080 VLMH310.

9 , VLMO310., VLMY310., VLMG310., Semiconductors Rev. , 07-Mar-187 Document Number: 84789 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 11 - Specific Luminous Intensity Current/Duty CycleFig. 12 - Relative Luminous Intensity vs. Forward CurrentFig. 13 - Relative Intensity vs. WavelengthFig. 14 - Forward Current vs. Forward VoltageFig. 15 - Relative Luminous Intensity vs. Ambient TemperatureFig. 16 - Specific Luminous Intensity Current/Duty Cycle95 10259soft (mA)tp - Specific Luminous F - Forward Current (mA)95 9997I- Relative Luminous Intensityv rel soft orange95 10324soft - Wavelength (nm) - Relative 9987V F - Forward Voltage (V)I- Forward Current (mA)F 9992I- Relative Luminous Intensityv rel T amb - Ambient Temperature ( C)204060800100yellow102050100 (mA)tp/TIspec - Specific Luminous , VLMO310.

10 , VLMY310., VLMG310., Semiconductors Rev. , 07-Mar-188 Document Number: 84789 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 17 - Relative Luminous Intensity vs. Forward CurrentFig. 18 - Relative Intensity vs. WavelengthFig. 19 - Forward Current vs. Forward VoltageFig. 20 - Relative Luminous Intensity vs. Ambient TemperatureFig. 21 - Specific Luminous Intensity vs. Forward CurrentFig. 22 - Relative Luminous Intensity vs. Forward CurrentyellowI F - Forward Curren t (mA) 9999I- Relative Luminous Intensity v rel 10039 - Wavelength (nm) - Relative F - Forward Voltage (V)I- Forward Current (mA)F 5210395 10320I- Relative Luminous Intensityv rel Tamb- Ambient Temperature ( C)204060800100102050100 - Specific Luminous IntensityIF (mA) F - Forward Current (mA) 1095 9996I- Relative Luminous Intensityv rel 101 VLMH310.