WR5276 SERIES HEAVY DUTY BUTTONS Heavy Duty …

1 WR5276 SERIES HEAVY DUTY BUTTONS . HEAVY Duty Weatherized Stainless Steel Switch HEAVY duty, water proof, push button switch Exterior Grade constructed of brushed stainless steel is ideal in exterior applications and for use in harsh operating conditions. A neoprene gasket is Water Proof included for mounting the switch plate. Suitable for Wash down Applications Switches The WR5276 SERIES button is rated to a sealing degree of IP65. (Protected against water projected from a nozzle from any direction). LED Illuminated Indicator The optional bi-color LED ring can be utilized to provide visual indication of switch status or may be controlled independently by other devices. The Illuminated LED ring color is red or green depending on the polarity of the 24 volts DC.

2 Applied to the independent LED ring contacts. Dual Form Z Switch Contacts Isolated normally open and normally closed switch contacts allow simultaneous control of independent circuits; such as controlling normally closed lock power while signaling the access control system with a normally open contact. Typical Configurations: Alternate or Momentary # WR5276 -HD28 Alternate Action Form The WR5276 SERIES push button switches are Z Non-Illuminated available with momentary or alternate-action switch operation. # WR5276 -HD28xL Alternate Action Form Z & Illuminated LED Ring Optional Engraving # WR5276 -HD29 Momentary Action Along with standard switch plate sizes, and five Form Z Non-Illuminated standard engraved legends, custom plates and # WR5276 -HD29xL Momentary Action text can be made to specification with quick turn- Form Z & Illuminated LED Ring around.

3 Applications: Physical Data Specifications . Actuator Material Brushed Stainless Steel Unless noted otherwise, weather sealed push button Actuator Force 550 +/-50gF switch assemblies shall be flush wall mounted to Operating Temp -130F to 1580F, -250C to 700C standard, recess mounted, electrical boxes. IP Rating IP65 Waterproof Button Mounting screws will be Phillips flat head or Pin-in- Electrical Hex tamper resistant mounting screws provided. Contact Rating 2A @ 24 VDC. 2A @ 125 VAC Push button switches are to be constructed of LED Ring Red / Green 24 VDC brushed stainless steel with an illuminating LED. 120 mA Peak Current indicator ring. Switch contacts to be form Z with 20 mA Operating Current two normally open and two normally closed Outputs contacts.

4 Push button operation to be momentary or Form Z 2-Normally Open & 2-Normally Closed with alternate-action as noted. LED ring shall illuminate Floating Common for Independent Circuits as green when device is secure and red when Operation Alternate-Action (See HD28) device is unsecure unless noted otherwise. Momentary (See HD29). The mounting plate shall be constructed of stainless Plate Sizes steel with smooth edges on all four sides with a Standard as supplied is 1 Gang above neoprene gasket. Narrow Plate prefix N 1-3/4 x 4-1/2 Optional text, if required, will be engraved and paint 2 Gang Plate prefix D 4-1/2 x 4-1/2 filled. Optional Engraving . xE1 PUSH TO EXIT . xE2 PANIC . xE3 EMERGENCY RELEASE . xE4 PUSH TO RELEASE . xE5 EMERGENCY DOOR RELEASE.

5 XE6 Custom Engraving