5286 PUSH PLATES - DORTRONICS

1 5286 PUSH plate SWITCH CONTROLSPDS5286-08/2015 Highly VisibleEasy to OperateArchitecturalMatched FinishesStandard orCustom LegendsColor FilledEngraved LettersStandard Wall plate SizeThe W Series push plate consists of a1-1/2" x 3" push plate with a 3" wide backplate for standard single gang box with standard slotted head are available on special Gang Push plate SwitchesThe D Series has a large 4" x 4" push platewith a 4-5/8 wide back plate prepared formounting to a double gang box. Furnishedwith pre-assembled socket head mountingscrews easily accessible through small holesin the push of Contact FormsPush PLATES switches are available with alter-nate action, momentary or time delayed con-tacts.

2 The adjustable delay action assembliesutilize a miniature pneumatic timer, ad-justable from 2 to 60 seconds, with a com-pression spring under the push switch assemblies are rated for heavyduty usage and are furnished with color-coded wire leads for easy to See and OperateIdeal for use in office buildings, institutions,hospitals, nursing homes, banks, etc. wherecodes require a readily apparent and easy touse door control or electric lock release andan architecturally coordinated, aestheticallypleasing, appearance is 5286 exit release switches feature alarge, easily operated, 1-1/2 x 3 push push plate is available in two sizes andthree different back mounting PLATES to meetall installation requirements.

3 Both the pushplates and the back mounting PLATES havesmooth beveled edges on all four sides toenhance appearance. These assemblies arejoined from the back with concealed screws toresist tampering. N Series Push PlatesTypically used for mounting on narrow doorframes and aluminum mullions, the N styledevices consist of the standard 1-1/2 x 3 push plate mated with a narrow 1-3/4 wideback plate for hollow metal or aluminumframe mounting. Furnished with slotted ovalhead stainless steel screws for direct mount-ing to frame or partition box within tamper resistant mounting5286 SERIES PUSH plate EXIT RELEASE & ACCESS CONTROL SWITCHESM odel Descriptions:Pneumatic Time Delay 2-60 = DPST -Time DelayedAction with Narrow Switch PlateW5286-P23DA = DPST-Time DelayedAction with 1 Gang Switch plate D5286-P23DA = DPST-Time DelayedAction with 2 Gang Switch PlateMaintained Action: N5286-P24 = DPDT-Push On/Push Offwith Narrow Switch plate W5286-P24 = DPDT-Push On/PushOff with 1 Gang Switch PlateD5286-P24 = DPDT-Push On/Push Offwith 2 Gang Switch PlateMomentary Action.

4 N5286-P25 = DPDT-Momentary with Narrow Switch PlateW5286-P25 = DPDT-Momentary With 1 Gang Switch PlateD5286-P25 = DPDT-Momentary with 2 Gang Switch PlateElectrical Specification:Immediate response contacts - 6 amps @ 125 VAC4 amps @ 24 VDCD elayed action switches - 10 amps (resistive) @ 125 VACAll switches are furnished with 8 longcolor-coded stranded wire leads for easeof identification and :xE1 = PUSH TO EXIT (black letters) xE1R = PUSH TO EXIT (red letters) xE2 = PANIC (red letters) xE3 = EXIT (red letters)xE4 = DOOR RELEASE (black) xE5 = EMERGENCY DOOR RELEASE"xE6 = Other custom engraving xHCP = Handicap logo xHCP2 = Handicap logo with PUSH TO OPEN xHCP3 = Handicap logo with blue finish (white engraving)Specification Guide:Switch controls shall be manufactured by DORTRONICS Systems, Inc.

5 Push plate station controls shall be momentary or alternate action, SPDT or DPDT as scheduled (minimum 6 amps @ 120 VAC). Time delay push plate switches shall be field adjustable (2 to 60 seconds) with form Z contacts (10 amps resistive @ 125 VAC) where noted otherwise, push plateswitch assemblies shall be be flush wallmounted to standard, recess mounted,electrical boxes. Mounting screws shallbe slotted oval head stainless be supplied where PLATES and mounting PLATES shall beconstructed of anodized aluminum withsmoothed and beveled edges on all foursides. Assembly shall be with con-cealed fastenings. Standard and coloranodized aluminum push plate assem-blies shall be buffed to a satin plated finishes shall be be pol-ished or satin buffed as specified.

6 Let-tering and logos shall be engraved andpaint filled as :Standard is clear aluminum anodized. xBRE = Baked Red EnamelxDBA = Dark Bronze Anodized xUS3 = Plated Polished Brass xUS4 = Plated Satin BrassxUS26 = Plated Polished ChromexPin-in-hex tamper resistant screws1668 SAG HARBOR TURNPIKE, SAG HARBOR, NY - (800) 906-0137 - (516) 725-4234 FAXUS26D = Plated Satin Chrom