Ultrafast Avalanche SMD Rectifier - Vishay

1 BYG20D, BYG20G, General Semiconductor Revision: 21-Feb-20201 Document Number: 88958 For technical questions within your region: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Avalanche SMD RectifierADDITIONAL RESOURCESFEATURES Low profile package Ideal for automated placement Glass passivated pellet chip junction Low reverse current Soft recovery characteristics Ultrafast reverse recovery time Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 Material categorization.

2 For definitions of compliance please see APPLICATIONSFor use in high frequency rectification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive, and DATACase: SMA (DO-214AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant and AEC-Q101 qualified ( _X denotes revision code A, B.)

3 Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, HM3 suffix meet JESD 201 class 2 whisker testPolarity: color band denotes the cathode endPRIMARY CHARACTERISTICSIF(AV) AVRRM200 V, 400 V, 600 VIFSM30 AVF at Vtrr75 nsER20 mJTJ CPackage SMA (DO-214AC)Circuit configurationSingleSMA (DO-214AC)CathodeAnode333 DDD3D3D ModelsAvailableMAXIMUM RATINGS (TA = 25 C unless otherwise noted)PARAMETERSYMBOLBYG20 DBYG20 GBYG20 JUNITD evice marking codeBYG20 DBYG20 GBYG20 JMaximum repetitive peak reverse voltageVRRM200400600 VAverage forward currentIF(AV)

4 Forward surge current 10 ms single half sine-wave superimposed on rated loadIFSM30 APulse energy in Avalanche mode, non repetitive (inductive load switch off) I(BR)R = 1 A, TJ = 25 CER20mJOperating junction and storage temperature rangeTJ, TSTG-55 to +150 CBYG20D, BYG20G, General Semiconductor Revision: 21-Feb-20202 Document Number: 88958 For technical questions within your region: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)Pulse test: 300 s pulse width, 1 % duty cycle Notes(1)Mounted on epoxy-glass hard tissue(2)Mounted on epoxy-glass hard tissue, 50 mm2 35 m Cu(3)Mounted on Al-oxide-ceramic (Al2O3), 50 mm2 35 m Cu Note(1) AEC-Q101 qualifiedELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted)PARAMETERTEST CONDITIONSSYMBOLBYG20 DBYG20 GBYG20 JUNITM aximum instantaneous forward voltageIF = 1 ATJ = 25 CVF (1)

5 = DC reverse currentVR = VRRMTJ = 25 CIR1 ATJ = 100 C10 Maximum reverse recovery timeIF = A, IR = A, Irr = Atrr75nsTHERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted)PARAMETERSYMBOLBYG20 DBYG20 GBYG20 JUNITT ypical thermal resistance, junction to lead, TL = JL25 C/WTypical thermal resistance, junction to ambientR JA (1)150 C/WR JA (2)125R JA (3)100 ORDERING INFORMATION (Example)PREFERRED P/N UNIT WEIGHT (g)PREFERRED PACKAGE CODEBASE QUANTITYDELIVERY MODEBYG20J-E3 " diameter plastic tape and reelBYG20J-E3 " diameter plastic tape and reelBYG20 JHE3_A/H (1) " diameter plastic tape and reelBYG20 JHE3_A/I (1) " diameter plastic tape and reelBYG20J-M3 " diameter plastic tape and reelBYG20J-M3 " diameter plastic tape and reelBYG20 JHM3_A/H (1) " diameter plastic tape and reelBYG20 JHM3_A/I (1) " diameter plastic tape and reelBYG20D, BYG20G, General Semiconductor Revision: 21-Feb-20203 Document Number: 88958 For technical questions within your region.

6 DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) Fig. 1 - Forward Current vs. Forward VoltageFig. 2 - Max. Average Forward Current vs. Ambient TemperatureFig. 3 - Reverse Current vs. Junction TemperatureFig. 4 - Max. Reverse Power Dissipation vs. Junction TemperatureFig. 5 - Diode Capacitance vs. Reverse VoltageFig. 6 - Reverse Recovery Time vs. Forward Title1st line2nd line2nd lineInstantaneous Forward Current (A)Instantaneous Forward Voltage (V)TJ= -40 CTJ= 25 CTJ= 150 Temperature ( C)Average Forward Current (A)VR = VRRMHalf Sine-WaveR JA 25 K/WR JA 125 K/WR JA 150 K/W110100255075100125150 Reverse Current ( A)Junction Temperature ( C)VR = VRRMPR - Limitat 100 % VR01020304070255075100125150 Reverse Power Dissipation (mW)Junction Temperature ( C)VR = VRRMPR - Limitat 80 % = 1 MHzReverse Voltage (V)Diode Capacitance (pF) = A, iR = AReverse Recovery Time (ns)Forward Current (A)

7 TA = 125 CTA = 100 CTA = 75 CTA = 25 CTA = 50 CBYG20D, BYG20G, General Semiconductor Revision: 21-Feb-20204 Document Number: 88958 For technical questions within your region: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 7 - Reverse Recovery Charge vs. Forward CurrentFig. 8 - Thermal ResponsePACKAGE OUTLINE DIMENSIONS in inches (millimeters) Recovery Charge (nC)Forward Current (A)IR = A, iR = ATA = 125 CTA = 100 CTA = 75 CTA = 25 CTA = 50 C1101001000 Thermal Resistance for Pulse Cond.

8 (K/W)Pulse Length (s)10-510-410-310-210-1100101102 Single Pulse125 K/W DCtp/T = = = = = = ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )Cathode Band0 (0)SMA (DO-214AC)Mounting Pad ( ) ( ) ( ) ( ) ( ) ( )Legal Disclaimer Revision: 01-Jan-20191 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product.

9 To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications.

10 Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts.