Industrial Belt Products July, 2010 - Power Parts

1 Poly Chain GT Carbon Belts Nothing yourself a competitive advantage by designing in the GatesPoly Chain GT Carbon drive system instead of roller chain in yournext Power transmission patented use of Carbon Fiber as the tensile cord in this beltprovides increased horsepower rating for greater Power density andcompactness and increased flexibility, allowing the use of backsideidlers. When combined with Gates Poly Chain GT2 sprockets, youhave a lightweight, long-lasting, maintenance-free system that smore than a match for roller Industrial markets, especially suited to replace roller chain width minimizes reducer overhung loads and left-justifiedhubs on Poly Chain GT2 sprockets accommodate short.

2 Clean solution for roller chain drive conversion Significantly reduces maintenance costs Equivalent capacity to roller chain drives in the same width Easy rust-free wash-down with Gates Stainless Steel or Nickel Plated hardware Fast drive conversion payback Quieter than roller chain drivesnNew construction provides up to 55% more low-speed capacity than the original PCGT construction and 15%more than tooth profileprovides high shear strength, noise reduction, and improved load tensile cordcombines minimal stretch with extraordinary strength and load carrying capacity,while absorbing shock and surge constructionresists chemicals, oil, pollutants, and tooth facingreduces friction and eliminates the need for operational in temperature extremes of -65 F to +185 F (-54 C to +85 C).

3 Recommended SprocketsPoly Chain GT2 Sprockets - 8M and 14 MNotesPoly Chain GT Carbon belts can be used on existing drives as replacement for previous generation Poly Chain Chain GT Carbon belt part numbers are identical to those of Poly Chain GT2: part number 8 MGT-1000-21 denotes an 8mm pitch,1000mm pitch length and 21mm the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt. Beltpitch lengthis thetotal length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a Poly Chain GT Carbon belt lies withinthe tensile :Use of non-Gates manufactured sprockets is not recommended: Gates Poly Chain GT2 sprockets are manufactured, specifiedand tested to fully support the full capabilities of the Poly Chain GT Carbon belt.

4 Product performance cannot be guaranteed when non-Gatessprockets are utilize Taper-Lock type Poly Chain GT2 Sprockets when designing a new Poly Chain GT Carbon belt drive No. Series 92748mm Pitch 12mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Belt ProductsJuly, 2010 Poly Chain GT Carbon CorporationPOLY CHAIN ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 21mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 36mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 62mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Belt ProductsJuly, 2010 Poly Chain GT Carbon BeltsProduct No.

5 Series 9274(continued)8mm Pitch 12mm Wide(continued) Driving Force in Power CHAIN ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 20mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 37mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 68mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Belt ProductsJuly, 2010 Poly Chain GT Carbon BeltsProduct No. Series 9274(continued)8mm Pitch 62mm Wide(continued) CorporationPOLY CHAIN ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 90mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 125mm ofTeethPitchLength(In.)

6 (Lbs.) ofTeethPitchLength(In.) (Lbs.) Belt ProductsJuly, 2010 Poly Chain GT Carbon BeltsProduct No. Series 9274(continued)14mm Pitch 68mm Wide(continued) Driving Force in Power CHAIN BELTSA new and unique manufacturing process allows longer andcustom length endless belts than have previously been manufacturing process is used for the following belt lengthranges: 8M Pitch Lengths > 4480mm and 14M Pitch Lengths > Industrial markets requiring long center distance and high loadcarrying capacity. Especially targeted towards HVAC, roller chainand gear replacement, oil, mining, water treatment plants, pulp andpaper, and general polyurethane construction resists chemicals, oil,pollutants, and operational in temperature extremes of -65 F to +185 F (-54 C to +85 C).

7 NGates patented curvilinear tooth profile provides high shear strength, and improved load carrying tooth facing reduces friction and eliminates the need for carbon tensile cord combines minimal stretch with extraordinary strength and load carrying capacity,while absorbing shock and surge SprocketsPoly Chain GT 2 Sprockets - 8M and 14 MNotesBelt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt. Belt pitch length is thetotal length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a Poly Chain GT Carbon belt lieswithin the tensile Chain GT Carbon Spiral Spliced Belts are Standard/Non-Stock and may require lead time.

8 Please check with Customer Service :Use of non-Gates manufactured sprockets is not recommended: Gates Poly Chain GT 2 sprockets are manufactured, specifiedand tested to fully support the full capabilities of the Poly Chain GT Carbon belt. Product performance cannot be guaranteed whennon-Gates sprockets are used. Always utilize Taper-Lock type Gates Poly Chain GT 2 Sprockets when designing a new Poly Chain GT Carbon belt drive No. Series 926814mm Pitch 37mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 68mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) Pitch 90mm ofTeethPitchLength(In.) (Lbs.) ofTeethPitchLength(In.) (Lbs.) CurvilinearTooth ProfileNylon Tooth FacingPolyurethaneConstructionCarbonTens ile CordsIndustrial Belt ProductsJuly, 2010 Poly Chain GT Carbon - Extended Length CorporationPOLY CHAIN BELTSAn innovative construction combined with the Gates tooth profilemakes the Curve Saw Belt compact and lightweight withextraordinary strength and load carrying capacity.

9 The Curve SawBelt can be used on the toughest shock loaded applications toreduce down Industrial markets, but particularly suited for Curve Sawapplications or any shock loaded application patented curvilinear tooth profile provides high shearstrength, and improved load carrying tensile cordcombines extraordinary strengthand superior shock load reduces log jams and associated down tooth facingreduces friction and eliminates the need operational in temperature extremes of -65 F to +185 F(-54 C to +85 C).Recommended SprocketsPoly Chain GT2 Sprockets - 14 MNotesBelt pitchis the distance in millimeters between two adjacent tooth centers as measured on thepitch lineof the pitchlength is the total length (circumference) in millimeters as measured along the pitch theoretical pitch line of a Poly Chain GT2 belt lies within the tensile :New designs must utilize the Poly Chain GT2 Sprockets because of the high torque capacity of the Curve Saw Poly Chain No.

10 Series ofTeethPitchLength(In.) (Lbs.) Belt ProductsJuly, 2010 Curve Saw Poly Chain GT 2 Driving Force in Power CHAIN BELTSPoly Chain GT Carbon Belts Nothing Tougher .The new Poly Chain GT Carbon belt construction utilizes apolyurethane body combined with Carbon Fiber tensile cordsfor increased capacity and Industrial markets requiring short center distance buthigh-density Power . Particularly suited for replacing roller chainon roll-to-roll tensile cordcombines minimal stretch withextraordinary strength and load carrying capacity, whileabsorbing shock and surge constructionresists chemicals, oil,pollutants, and tooth facingreduces friction and eliminates the needfor tooth profileprovides high shear strength,noise reduction, and improved load carrying operational in temperature extremes of -65 F to +185 F(-54 C to +85 C).