Solid Tantalum Surface Mount Chip Capacitors …

1 Sprague Revision: 30-Mar-20201 Document Number: 40002 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Tantalum Surface Mount chip CapacitorsTANTAMOUNT , Molded Case, Standard Industrial GradeLINKS TO ADDITIONAL RESOURCESPERFORMANCE / ELECTRICAL Temperature: -55 C to +125 C (above 85 C, voltage derating is required)Capacitance Range: F to 1000 FCapacitance Tolerance: 5 %, 10 % , 20 %100 % Surge Current Tested (D and E Case Codes)Voltage Rating: 4 VDC to 75 VDCNote For recommended voltage derating guidelines see Typical Performance Characteristics FEATURES Molded case available in six case codes Terminations: 100 % matte tin standard, tin / lead available Compatible with high volume automatic pick and place equipment Meets EIA-535-BAAC mechanical and performance requirements Qualified to EIA-717 Moisture sensitivity level 1 Optical character recognition qualified Compliant terminations Material categorization.

2 For definitions of compliance please see *This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for detailsAPPLICATIONS Industrial Telecom infrastructure General purpose Notes We reserve the right to supply higher voltage ratings and tighter capacitance tolerance Capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating We reserve the right to supply better series with more extensive screening Dry pack as specified in J-STD-033 Design ToolsRelatedDocuments333 DDD3D3D ModelsCalculatorsApplicationNotesATechni calNotesTDid YouKnowAvailableAvailableAvailableORDERI NG INFORMATION293D107X9010D2WE3 TYPECAPACITANCECAPACITANCEDC VOLTAGE RATINGCASE CODETERMINATION ANDTOLERANCEAT +85 CPACKAGINGThis is expressed inpicofarads.

3 The firsttwo digits are thesignificant third is the numberof zeros to = 20 %X9 = 10 %X5 = 5 %(special order)This is expressed in complete the three-digitblock, zeros precede thevoltage rating. A decimalpoint is indicated by an R (6R3 = V).See Ratingsand CaseCodes tableMatte tin2TE3 = 7" (178 mm) reel 2WE3 = 13" (330 mm) reel 2DE3 = 7" (178 mm) reel, dry pack 2RE3 = 13" (330 mm) reel, dry pack Tin / lead8T = 7" (178 mm) reel 8W = 13" (330 mm) reel 8D = 7" (178 mm) reel, dry pack 8R = 13" (330 mm) reel, dry Sprague Revision: 30-Mar-20202 Document Number: 40002 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

4 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option)Note(1)125 C life test post test limits per AEC-Q200 DIMENSIONS in inches [millimeters]CASE CODEEIA SIZELWHPTWTH (MIN.) [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]

5 RATINGS AND CASE CODES F4 V10 V16 V20 V25 V35 V50 V63 V75 / / / / BA / B / / BB / CB / / BA / BA / BB / / BA / BA / BB / CB / C / DB / C / / BA / BA / BA / B / CB / CB / C / / BA / BA / BA / B / CA / B / CB / C / DC / / BA / BA / B / CA / B / CA / B / CA / B / C / DB / C / DC / D / / BA / BA / B / CA / B / CA / B / CB / C / DC / DD / E10A / BA / B / CA / B / CA / B / C / DB / C / DB / C / DC / DD / EE15A / B / CA / B / CA / B / CB / CB / C / DB / C / DC / D / EE22A / B / CA / B / CA / B / C / DB / C / DB / C / DC / D / ED / E33A / B / CA / B / CB / C / DB / C / DC / DD / ED / E47A / B / CA / B / C / DB / C / DC / D / ED / ED / EE (1)68B / C / DB / C / DB / C / D / ED / ED / EE100 A / B / C / D B / C / D / EB / C / D / ED / ED / E120 DDE150B / C / DC / D / EC / D / ED / E220 B / C / D / EC / D / ED / EE330D / ED / ED / E470D / ED / EE680D / EE1000 EELTH (MIN.)

6 HWTWPGlue PadGlue Sprague Revision: 30-Mar-20203 Document Number: 40002 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)Capital letter indicates lead (Pb)-freeMARKING A CASE VOLTAGE marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. A case Capacitors use a letter code for the voltage and EIA capacitance vishay identification marking is included if space permits. vishay marking ( circled 2 ) may show additives in the form of short lines, depicting actual manufacturing facility.

7 For A case Capacitors discontinuation in polarity bar maybe used as actual manufacturing facility designation. Capacitors rated at V are marked 6 manufacturing date code is marked on all Capacitors , for details see FAQ: may bear TP3 marking scheme if parts are substituted with high performance automotive grade TP3 family products. This includes, for example, letter P as shown the factory for further MARKING EXAMPLESTANDARD RATINGSCAPACITANCE ( F) CASE CODE PART NUMBER MAX. DCLAT +25 C ( A) MAX. DF AT +25 C 120 Hz(%) MAX. ESR AT +25 C 100 kHz( ) MAX. RIPPLE 100 kHzIRMS (A) 4 VDC AT +85 C; VDC AT +125 (1)004A(2) (1)004A(2) (1)004A(2) (1)004B(2) (1)004A(2) (1)004B(2) (1)004A(2) (1)004B(2) (1)004A(2) (1)004B(2) (1)004C(2) Part number definitions:(1) Tolerance: X0, X9.

8 For 5 % tolerance (code X5) contact factory(2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W, 2DE3, 2RE3, 8D, 8 RCapacitance code, pFIndicates lead (Pb)-free Polarity band (+)Voltage codeV104LA CaseDate codedesignationDate codeVishay markingIndicates lead (Pb)-freeVoltage Capacitance, FPolarity band (+) 2210 LXX2B, C, D, E CasesCapacitance code, pFIndicates high performance (1)Polarity band (+)Voltage codeV104ZA CaseDate codedesignationDate codeVishay markingIndicates high performance (1)VoltageCapacitance FPolarity band (+)22P10XX2 B, C, D, E Sprague Revision: 30-Mar-20204 Document Number: 40002 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

9 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +85 C; VDC AT +125 C22A293D226(1)004A(2) (1)004B(2) (1)004C(2) (1)004A(2) (1)004B(2) (1)004C(2) (1)004A(2) (1)004B(2) (1)004C(2) (1)004B(2) (1)004C(2) (1)004D(2) (2) (1)004B(2) (1)004C(2) (1)004D(2) (1)004D(2) (1)004B(2) (1)004C(2) (1)004D(2) (2) (1)004C(2) (1)004D(2) (1)004E(2) (1)004D(2) (1)004E(2) (1)004D(2) (1)004E(2) (2) (1)004E(2) (2) VDC AT +85 C; 4 VDC AT +125 (1)6R3A(2) (1)6R3A(2) (1)6R3A(2) (1)6R3B(2) (1)6R3A(2) (1)6R3B(2) (1)6R3A(2) (1)6R3B(2) RATINGSCAPACITANCE ( F) CASE CODE PART NUMBER MAX.

10 DCLAT +25 C ( A) MAX. DF AT +25 C 120 Hz(%) MAX. ESR AT +25 C 100 kHz( ) MAX. RIPPLE 100 kHzIRMS (A) Note Part number definitions:(1) Tolerance: X0, X9. For 5 % tolerance (code X5) contact factory(2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W, 2DE3, 2RE3, 8D, Sprague Revision: 30-Mar-20205 Document Number: 40002 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +85 C; 4 VDC AT +125 C10A293D106(1)6R3A(2) (1)6R3B(2) (1)6R3C(2) (1)6R3A(2) (1)6R3B(2) (1)6R3C(2) (1)6R3A(2) (1)6R3B(2) (1)6R3C(2) (1)6R3A(2) (1)6R3B(2) (1)6R3C(2) (1)6R3A(2) (1)6R3B(2) (1)6R3C(2) (1)6R3D(2) (1)6R3B(2) (1)6R3C(2) (1)6R3D(2) (1)6R3B(2) (1)6R3C(2) (1)6R3D(2) (1)6R3E(2) (1)6R3D(2) (1)6R3C(2) (1)6R3D(2) (1)6R3E(2) (1)6R3C(2) (1)6R3D(2) (1)6R3E(2) (1)6R3D(2) (1)6R3E(2) (1)6R3D(2) (1)6R3E(2) (1)6R3E(2) (2) RATINGSCAPACITANCE ( F) CASE CODE PART NUMBER MAX.