DC Film Capacitors MKT Axial Type - Vishay

1 Roederstein Revision: 04-Jul-131 Document Number: 26013 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT film CapacitorsMKT Axial TypeFEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see APPLICATIONSB locking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage For more detailed data and test requirements, contact REFERENCE DATAC apacitance range (E12 series)

2 470 pF to 22 FCapacitance tolerance 20 %, 10 %, 5 %Climatic testing class according to IEC 60068-155/100/56 Maximum application temperature100 CReference specificationsIEC 60384-2 DielectricPolyester filmElectrodesMetallizedConstructionMono and internal series constructionEncapsulationPlastic-wrapped , epoxy resin sealed, flame retardantLeadsTinned wireMarkingC-value; tolerance; rated voltage; manufacturer s type; code for dielectric material; manufacturer location; manufacturer's logo; year and weekRated DC voltage63 VDC, 100 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDCR ated AC voltage40 VAC, 63 VAC, 160 VAC, 200 VAC, 220 VACPull test on leadsMinimum 20 N in direction of leads according to IEC 60068-2-21 Bent test on leads2 bends through 90 combined with 10 N tensile strengthReliabilityOperational life > 300 000 h (40 UR)Failure rate < 2 FIT (40 UR)DIMENSIONS in millimetersLEAD > > < d DMax.

3 Roederstein Revision: 04-Jul-132 Document Number: 26013 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT OF CATALOG NUMBERNote For detailed tape specifications refer to Packaging Information or end of catalogSPECIFIC REFERENCE DATADESCRIPTIONVALUET angent of loss angle: at 1 kHzat 10 kHzat 100 kHzC = F 80 x 10-4150 x 10-4250 x F C = F 80 x 10-4150 x 10-4- C F 100 x 10-4--CAPACITOR LENGTH(mm)MAXIMUM PULSE RISE TIME (dU/dt)R [V/ s]63 VDC100 VDC250 VDC400 VDC630 VDC1000 the maximum pulse voltage is less than the rated voltage higher dU/dt values can be between leads, for C F and UR 100 V> 15 000 M R between leads, for C F and UR > 100 V> 30 000 M RC between leads, for C > F and UR 100 V> 5000 sRC between leads, for C > F and UR > 100 V> 10 000 sR between leads and case, 100 V.

4 (foil method)> 30 000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 x URDC, 1 minMaximum application temperature100 CMKT 1813 XXX25 XXCAPACITANCE(numerically)Example:468 = 680 nFMULTIPLIER(nF) Un = 06 = 63 VUn = 01 = 100 VUn = 25 = 250 VUn = 40 = 400 VUn = 63 = 630 VUn = 10 = 1000 VSPECIAL LETTER FOR TAPEDBulk RReelGAmmopackTOLERANCE4 5 %5 10 %6 20 % Roederstein Revision: 04-Jul-133 Document Number: 26013 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT DATAURDC(V)CAP.

5 ( F) (2) (2) (2) (2) (2) Roederstein Revision: 04-Jul-134 Document Number: 26013 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (2) (2) (2) (2) (2) (2) DATAURDC(V)CAP.( F)CAPACITANCECODEVOLTAGECODEVACDIMENSION SDL Roederstein Revision: 04-Jul-135 Document Number: 26013 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Pitch = L + (1)Not suitable for mains applications(2)For the smaller size please add -M at the end of the type designation ( MKT1813-510/255-M) (1) (2) (2) (1) DATAURDC(V)CAP.

6 ( F)CAPACITANCECODEVOLTAGECODEVACDIMENSION SDL Roederstein Revision: 04-Jul-136 Document Number: 26013 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Attention: Capacitors with L > mm only as bulk availableNote(1)Tolerance codes: 4 = 5 % (J); 5 = 10 % (K); 6 = 20 % (M)MOUNTINGN ormal UseThe Capacitors are designed for mounting on printed-circuit boards. The Capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion detailed tape specifications refer to packaging information: or end of Method of Mounting to Withstand Vibration and ShockIn order to withstand vibration and shock tests, it must be ensured that the capacitor body is in good contact with the printed-circuit board: For L 19 mm Capacitors shall be mechanically fixed by the leads.

7 For larger pitches the Capacitors shall be mounted in the same way and the body clamped. The maximum diameter and length of the Capacitors are specified in the Dimensions table. Eccentricity as shown in the drawing Requirements on Printed-Circuit BoardThe maximum length and width of film Capacitors is shown in the drawing: Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. Product height with seating plane as given by IEC 60717 as reference: hmax. h + mm or hmax. h' + mmStorage TemperatureTstg = - 25 C to + 35 C with RH maximum 75 % without condensationRatings and Characteristics Reference ConditionsUnless otherwise specified, all electrical values apply to an ambient temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %.

8 For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %.RECOMMENDED PACKAGINGPACKAGING CODETYPE OF PACKAGING REEL DIAMETER (mm)ORDERING CODE EXAMPLESGAmmo-MKT1813-422-014-GxRReel350 MKT1813-422-014-Rx-Bulk-MKT1813-422-014x EXAMPLE OF ORDERING CODETYPECAPACITANCE CODEVOLTAGE CODETOLERANCE CODE (1)PACKAGING CODEMKT1813410065G1 mm Roederstein Revision: 04-Jul-137 Document Number: 26013 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

9 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT AC VOLTAGE VS. FREQUENCY10075321075321 VRMSf [Hz]Capacitance in F63 VDC102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 [Hz]102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 Capacitance in F 400 [Hz]102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 Capacitance in F 100 [Hz]102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 Capacitance in pF and F 630 [Hz]

10 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 Capacitance in F 250 [Hz]102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 Capacitance in pF and F 1000 Roederstein Revision: 04-Jul-138 Document Number: 26013 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT voltage (AC and DC) as a function of temperatureU = f(TA), TLL TA TULC apacitance as a function of temperature C/C = f(TA), TLL TA TULC apacitance as function of frequency C/C = f(f), 100 Hz f 1 MHzDissipation factor as function of temperature tan /tan = f(TA), TLL TA TULI nsulation resistance as a function of temperatureRis = f(TA), TLL TA TULD issipation factor as a function of frequency tan /tan = f(f)